I have been working on a set new parts list, custom part fields, etc. Every thing has been working well enough, but today I noticed that if I data shortcut the network, any changes I make will not update (swap part). Another oddity I've noticed is that, if you swap a part, then edit any of the custom properties, you sort of lose the link to the proper part you've chosen.
A test is if you swap a part to a type e inlet, when you swap part on it again, it selects the correct type e part. However, if you then edit the material field to add an additional piece of info, then swap part just to see the swap part dialog, it will no longer select the type e, but be set as type c, which is the first item in that family.
I'm posting a link to my work-in-progress template folder. It includes my pipe styles / parts list dwg file, and the part list catalog I'm working on. If someone would give this a look, I would greatly appreciate it.
https://www.dropbox.com/sh/bqwsrekun899phc/AACrGL9cSITo1Gu_H_aAaZ6Sa?dl=0I'm pretty desperate at this point, so any help would be most appreciative.