Has anyone played around with renumbering sheets in Sheet Set Manager (like in the image below)? What I'm 'hoping' I can do is renumber all sheets from the top of the sheet set on down starting with 01. Does anyone know if it's possible and could you point me in the right direction?
Thanks.
What a coincidence... I just got through completing this very thing.
I can't copy my exact code here, but I can get you pointed in the right direction.
Go to
http://discussion.autodesk.com/thread.jspa?threadID=385447 , and scroll down to a reply from Mike Tuersley made on Feb/25/05 - 04:13 (GMT).
The code he posted in that message is a good start.
In the "LoopThruSheets" sub, replace the three "Debug.Print" lines with the actual code that will renumber the sheets, which will look something like this:
Dim u As String
u = CStr(i)
ssmSheet.SetNumber u
i = i + 1
Note: you will need a global integer variable "i" that is initially set to the number of the first sheet (typically 1)
After completing this, we're able to renumber a 125 sheet set in about 1 second.
If you get stuck, post back...