« previous next »
Pages: [1] |   Go Down

Author Topic: Layer's block with Design Center  (Read 1560 times)

0 Members and 1 Guest are viewing this topic.

Patrick_35

  • Guest
Layer's block with Design Center
« on: February 05, 2014, 05:12:42 AM »
Hi

With the Design Center, it's possible to assign a layer to a block (with property).
Can we get this layer with lisp/vlisp ?

Thanks

@+
Logged

Kerry

  • Mesozoic relic
  • Seagull
  • Posts: 11654
  • class keyThumper<T>:ILazy<T>
Re: Layer's block with Design Center
« Reply #1 on: February 05, 2014, 07:02:02 AM »

I don't recall seeing the capability of setting the layer for blocks from DesignCenter.
Care to remind us how you do that ?
Logged
kdub, kdub_nz in other timelines.
Perfection is not optional.
Everything will work just as you expect it to, unless your expectations are incorrect.
Discipline: None at all.

Patrick_35

  • Guest
Re: Layer's block with Design Center
« Reply #2 on: February 05, 2014, 08:08:11 AM »
Sorry, I was wrong.
It's tools palettes I wanted to said.

I stopped the Calva in coffee ;)
Logged

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
Re: Layer's block with Design Center
« Reply #3 on: February 05, 2014, 08:08:24 AM »
You can set a layer to a block from within Tool Palettes, but I've never seen a way to do it in Design Center.

edit: should have read the warning before hitting submit the 2nd time.
Logged
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
Re: Layer's block with Design Center
« Reply #4 on: February 05, 2014, 09:26:00 AM »
You can read each palette's layer, etc. from the atc file.
Logged
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox

Patrick_35

  • Guest
Re: Layer's block with Design Center
« Reply #5 on: February 05, 2014, 09:45:44 AM »
Thank you very much

I found the information in atc file

Regards
Logged
Pages: [1] |   Go Up
« previous next »