0 Members and 1 Guest are viewing this topic.
Sheet piling AZ Arbed, mostly used in my country. For 3D use the connectors are simplified.Is there a way to give the height of the pile a parameter inside a array? Thanks!https://drive.google.com/file/d/13vgTwT8ZXfztwOm8qrUCxBt3NABsQKRP/view?usp=sharingdocumentationhttps://sheetpiling.arcelormittal.com/products-services/production-range/az-sections/
Quote from: lamarn on December 15, 2018, 05:22:08 AMSheet piling AZ Arbed, mostly used in my country. For 3D use the connectors are simplified.Is there a way to give the height of the pile a parameter inside a array? Thanks!https://drive.google.com/file/d/13vgTwT8ZXfztwOm8qrUCxBt3NABsQKRP/view?usp=sharingdocumentationhttps://sheetpiling.arcelormittal.com/products-services/production-range/az-sections/There is a way to add a z stretch to a dynamic block, one has to play around with the UCS....
Quote from: mjfarrell on December 20, 2018, 12:08:29 PMQuote from: lamarn on December 15, 2018, 05:22:08 AMSheet piling AZ Arbed, mostly used in my country. For 3D use the connectors are simplified.Is there a way to give the height of the pile a parameter inside a array? Thanks!https://drive.google.com/file/d/13vgTwT8ZXfztwOm8qrUCxBt3NABsQKRP/view?usp=sharingdocumentationhttps://sheetpiling.arcelormittal.com/products-services/production-range/az-sections/There is a way to add a z stretch to a dynamic block, one has to play around with the UCS....The problem is that the BEDIT command only works in 2D....
Quote from: Crank on December 20, 2018, 12:22:07 PMQuote from: mjfarrell on December 20, 2018, 12:08:29 PMQuote from: lamarn on December 15, 2018, 05:22:08 AMSheet piling AZ Arbed, mostly used in my country. For 3D use the connectors are simplified.Is there a way to give the height of the pile a parameter inside a array? Thanks!https://drive.google.com/file/d/13vgTwT8ZXfztwOm8qrUCxBt3NABsQKRP/view?usp=sharingdocumentationhttps://sheetpiling.arcelormittal.com/products-services/production-range/az-sections/There is a way to add a z stretch to a dynamic block, one has to play around with the UCS....The problem is that the BEDIT command only works in 2D....Yes, I know....but there was an instance where myself and a student, quite accidentally made a block with a z stretch element....by mucking around with the UCS ....maybe I can do one later today...and post
** UCS command not allowed in block editor. **
I'm curious now, I'm not sure how this industry operates but couldn't you just set the first 3d solid to the desired length and array that entity?