Author Topic: FDOT State Kit  (Read 4369 times)

0 Members and 1 Guest are viewing this topic.

Mark

  • Custom Title
  • Seagull
  • Posts: 28753
FDOT State Kit
« on: September 28, 2017, 10:13:29 AM »
Anyone here use the state kit for striping plans? If so can you tell me the correct way to use the Pavement Marking Tool? (see image) What the tool creates and what the Index calls for seem to be different.
 
TheSwamp.org  (serving the CAD community since 2003)

Mark

  • Custom Title
  • Seagull
  • Posts: 28753
Re: FDOT State Kit
« Reply #1 on: September 28, 2017, 10:29:00 AM »
Another example. The bottom section was created using the ARRAY command.
TheSwamp.org  (serving the CAD community since 2003)

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: FDOT State Kit
« Reply #2 on: September 28, 2017, 11:41:10 AM »
sorry, no....

what do the FDOT people say to your question(s)?
Be your Best


Michael Farrell
http://primeservicesglobal.com/

Mark

  • Custom Title
  • Seagull
  • Posts: 28753
Re: FDOT State Kit
« Reply #3 on: September 28, 2017, 11:42:52 AM »
sorry, no....

what do the FDOT people say to your question(s)?
no response thus far.
TheSwamp.org  (serving the CAD community since 2003)

Crookedmonk

  • Newt
  • Posts: 30
Re: FDOT State Kit
« Reply #4 on: September 28, 2017, 04:44:49 PM »
Permastripe of Florida has an example. Not sure if this is what you are looking for.

wizman

  • Bull Frog
  • Posts: 290
Re: FDOT State Kit
« Reply #5 on: September 28, 2017, 09:30:42 PM »
Hi Mark,

You could verify if it is perpendicular distance or not through mutcd.

Regards,
Ron

Mark

  • Custom Title
  • Seagull
  • Posts: 28753
Re: FDOT State Kit
« Reply #6 on: September 29, 2017, 06:41:28 AM »
Hi Mark,

You could verify if it is perpendicular distance or not through mutcd.
No I could not.
TheSwamp.org  (serving the CAD community since 2003)

nobody

  • Swamp Rat
  • Posts: 861
  • .net stuff
Re: FDOT State Kit
« Reply #7 on: September 30, 2017, 04:30:22 PM »
The FDOT dude maintains a youtube channel that covers most of their custom tools:

https://www.youtube.com/channel/UCqbY8kqZuXp1pyYV6lIQw_A/videos

Dent Cermak

  • Guest
Re: FDOT State Kit
« Reply #8 on: November 13, 2017, 07:57:22 AM »
Looks like the program is written to use the perpendicular distance to get the horizontal distance. Is there anything in the Florida specs that says the width of parking stalls must be 7' minimum? Looks like that is the governing value. Either way, the program appears to be asking for the wrong info. The reason for their silence may be they are having to deal with an "Ooopsie" or some programmer is playing serious CYA.
« Last Edit: November 13, 2017, 08:07:25 AM by Dent Cermak »