Author Topic: CAD/BIM Technology Center: A/E/C CAD Standard  (Read 2662 times)

0 Members and 1 Guest are viewing this topic.

CADUser

  • Guest
CAD/BIM Technology Center: A/E/C CAD Standard
« on: June 29, 2012, 06:04:40 PM »
Hello Members,

I would like to use a template file offered by the CAD/Bim Technology Center. They have provided a group of templates for Architecture, which includes templates for model type, and also an .stb file.

But when I start a new sheet using one .dwt files, the plot style table assignments only displays .ctb files.

Can you please advise as how I can use this template with .stb.

Thank you,

CADUser

danallen

  • Guest
Re: CAD/BIM Technology Center: A/E/C CAD Standard
« Reply #1 on: June 29, 2012, 08:49:13 PM »
Try command CONVERTPSTYLES

CADUser

  • Guest
Re: CAD/BIM Technology Center: A/E/C CAD Standard
« Reply #2 on: June 29, 2012, 10:03:00 PM »
Thank you for the reply. That worked.

Now, I have encountered another dilemna. CAD/BIM Technology Center provided some dimension styles within the architecture templates. But when I go to dimension on object, whose actual size is 10'-0", the dimensions shows 120'-0".

What are your thoughts?

Thank you.

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: CAD/BIM Technology Center: A/E/C CAD Standard
« Reply #3 on: June 29, 2012, 10:47:45 PM »
There is a scale factor being applied>> on the primary units tab of the Dimstyle
be sure that the tick box for Apply to Layout Dimensions Only is checked. (or remove the scale factor)
Be your Best


Michael Farrell
http://primeservicesglobal.com/