Author Topic: Trignometry  (Read 48685 times)

0 Members and 2 Guests are viewing this topic.

caddman6425

  • Guest
Trignometry
« on: August 10, 2011, 10:42:40 AM »
Anybody good at trig here, I mean really good?

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Trignometry
« Reply #1 on: August 10, 2011, 11:39:19 AM »
what is the question?

If you don't post it we can't help you....
Be your Best


Michael Farrell
http://primeservicesglobal.com/

Krushert

  • Seagull
  • Posts: 13679
  • FREE BEER Tomorrow!!
Re: Trignometry
« Reply #2 on: August 10, 2011, 11:45:35 AM »
Ah.  I think he already ask question.  Maybe you missed it so I will point out to you.

Anybody good at trig here, I mean really good?

There! Can you see he asked his question?
 :-P :-P :evil: :evil: :-)
I + XI = X is true ...  ... if you change your perspective.

I no longer CAD or Model, I just hang out here picking up the empties beer cans

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Trignometry
« Reply #3 on: August 10, 2011, 12:32:18 PM »
Ah.  I think he already ask question.  Maybe you missed it so I will point out to you.

Anybody good at trig here, I mean really good?

There! Can you see he asked his question?
 :-P :-P :evil: :evil: :-)
uh, NO

he asked
A question.

As that isn't a question of Trigonometry, it is a question of ability to solve a trigonometric equation.

And THAT is the question he did NOT ask in a fully formed manner such that anyone; even if they are only mediocre at Trigonometry might be able to provide an answer.  That is should he actually post the actual mathematical equation, or challenge he needs a solution, or the proper direction to achieve a solution to.

As it could be that any of us could rise to the challenge and provide said direction, or answer when and or if it is actually posted for our consideration.
Be your Best


Michael Farrell
http://primeservicesglobal.com/

Jeff H

  • Needs a day job
  • Posts: 6144
Re: Trignometry
« Reply #4 on: August 10, 2011, 12:38:08 PM »
Actually he asked if anyone was good at 'being in good condition', 'trim'
 
Definition of trig
http://www.thefreedictionary.com/trig

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
Re: Trignometry
« Reply #5 on: August 10, 2011, 12:42:34 PM »
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox

Krushert

  • Seagull
  • Posts: 13679
  • FREE BEER Tomorrow!!
Re: Trignometry
« Reply #6 on: August 10, 2011, 12:43:02 PM »
Ah.  I think he already ask question.  Maybe you missed it so I will point out to you.

Anybody good at trig here, I mean really good?

There! Can you see he asked his question?
 :-P :-P :evil: :evil: :-)
uh, NO

he asked
A question.

As that isn't a question of Trigonometry, it is a question of ability to solve a trigonometric equation.

And THAT is the question he did NOT ask in a fully formed manner such that anyone; even if they are only mediocre at Trigonometry might be able to provide an answer.  That is should he actually post the actual mathematical equation, or challenge he needs a solution, or the proper direction to achieve a solution to.

As it could be that any of us could rise to the challenge and provide said direction, or answer when and or if it is actually posted for our consideration.

Hook, line and Sinker!
**We really need that sarcasm smiley here at TheSwamp.**
I + XI = X is true ...  ... if you change your perspective.

I no longer CAD or Model, I just hang out here picking up the empties beer cans

BlackBox

  • King Gator
  • Posts: 3770
Re: Trignometry
« Reply #7 on: August 10, 2011, 12:54:21 PM »
Actually he asked if anyone was good at 'being in good condition', 'trim'
 
Definition of trig
http://www.thefreedictionary.com/trig

Perhaps the question posed in the OP was mistakenly incomplete, and he really meant to ask if anyone was good at 'trig[ging]', 'Stopping (a wheel) from rolling, as with a wedge.'  :?

I mean, if I had to stop a wheel from rolling, I wouldn't want someone who's only mediocre at 'stopping (a wheel) from rolling'... I too would prefer someone who's 'Really good.' Just saying.
"How we think determines what we do, and what we do determines what we get."

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
Re: Trignometry
« Reply #8 on: August 10, 2011, 01:01:27 PM »
I mean, if I had to stop a wheel from rolling, I wouldn't want someone who's only mediocre at 'stopping (a wheel) from rolling'... I too would prefer someone who's 'Really good.' Just saying.
Except we only know about the ownership of a wheel. We don't have a clue what he's doing with it. (straight into Out of Context thread.)
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox

BlackBox

  • King Gator
  • Posts: 3770
Re: Trignometry
« Reply #9 on: August 10, 2011, 01:05:08 PM »
(straight into Out of Context thread.)

LoL! linky

Edit: Figured I'd beat Jeff to the punch. LoL
"How we think determines what we do, and what we do determines what we get."

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Trignometry
« Reply #10 on: August 10, 2011, 01:26:43 PM »
Anybody good at trig here, I mean really good?
Given he posted this partial question over 2.5 hours ago, he must want someone that is really good and extremely SLOW at Trigonometry to help him out with this question.
Be your Best


Michael Farrell
http://primeservicesglobal.com/

Biscuits

  • Swamp Rat
  • Posts: 502
Re: Trignometry
« Reply #11 on: August 10, 2011, 01:53:53 PM »
Oh my GAWD.just answer the question already.

The answer is YES.

There problem solved....now we can get on with the rest of the excitement in our lives!

Krushert

  • Seagull
  • Posts: 13679
  • FREE BEER Tomorrow!!
Re: Trignometry
« Reply #12 on: August 10, 2011, 02:01:11 PM »
Oh my GAWD.just answer the question already.

The answer is YES.

There problem solved....now we can get on with the rest of the excitement in our lives!

 :-D :-D
But Sorry; certifiable proof is needed along with your first born that you are "really good" at trigonometry.
I + XI = X is true ...  ... if you change your perspective.

I no longer CAD or Model, I just hang out here picking up the empties beer cans

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
Re: Trignometry
« Reply #13 on: August 10, 2011, 02:02:48 PM »
Oh my GAWD.just answer the question already.

The answer is YES.

There problem solved....now we can get on with the rest of the excitement in our lives!

 :-D :-D
But Sorry; certifiable proof is needed along with your first born that you are "really good" at trigonometry.
Wait, we actually accomplished something here?
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox

Krushert

  • Seagull
  • Posts: 13679
  • FREE BEER Tomorrow!!
Re: Trignometry
« Reply #14 on: August 10, 2011, 02:06:38 PM »
Oh my GAWD.just answer the question already.

The answer is YES.

There problem solved....now we can get on with the rest of the excitement in our lives!

 :-D :-D
But Sorry; certifiable proof is needed along with your first born that you are "really good" at trigonometry.
Wait, we actually accomplished something here?
Not yet by my simple standards.  But getting closer.
I + XI = X is true ...  ... if you change your perspective.

I no longer CAD or Model, I just hang out here picking up the empties beer cans

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
Re: Trignometry
« Reply #15 on: August 10, 2011, 02:07:35 PM »
Oh my GAWD.just answer the question already.

The answer is YES.

There problem solved....now we can get on with the rest of the excitement in our lives!

 :-D :-D
But Sorry; certifiable proof is needed along with your first born that you are "really good" at trigonometry.
Wait, we actually accomplished something here?
Not yet by my simple standards.  But getting closer.
2+2=5
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox

BlackBox

  • King Gator
  • Posts: 3770
Re: Trignometry
« Reply #16 on: August 10, 2011, 02:14:17 PM »
Better idea, why doesn't the OP just get 'good'... 'really good' at trigonometry on their own:

Learn trigonometry at Khan Academy
"How we think determines what we do, and what we do determines what we get."

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
Re: Trignometry
« Reply #17 on: August 10, 2011, 02:15:07 PM »
Better idea, why doesn't the OP just get 'good'... 'really good' at trigonometry on their own:

Learn trigonometry at Khan Academy
Khaaaaaan!
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox

kdub_nz

  • Mesozoic keyThumper
  • SuperMod
  • Water Moccasin
  • Posts: 2111
  • class keyThumper<T>:ILazy<T>
Re: Trignometry
« Reply #18 on: August 10, 2011, 10:55:14 PM »
 :-)
Anybody good at trig here, I mean really good?

yes.


edit: sorry, I should have read the complete thread before posting ... seems the question has  been answered.
Called Kerry in my other life
Retired; but they dragged me back in !

I live at UTC + 13.00

---
some people complain about loading the dishwasher.
Sometimes the question is more important than the answer.

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
Re: Trignometry
« Reply #19 on: August 10, 2011, 10:57:26 PM »
Anybody good at trig here, I mean really good?

yes.
HaHa. Sentence structuring and grammar.
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox

Keith™

  • Villiage Idiot
  • Seagull
  • Posts: 16899
  • Superior Stupidity at its best
Re: Trignometry
« Reply #20 on: August 10, 2011, 11:10:27 PM »
You guys are seriously afflicted ...

Now that the question has been answered in the affirmative .. if you haven't seriously pissed off yet another newt swamper, then perhaps at some point we can get him to develop his thoughts more.

I guess everyone here already knows everything and they never had the occasion to have to ask anyone for anything. It must be a nice bubble you are living in.
Proud provider of opinion and arrogance since November 22, 2003 at 09:35:31 am
CadJockey Militia Field Marshal

Find me on https://parler.com @kblackie

Jeff H

  • Needs a day job
  • Posts: 6144
Re: Trignometry
« Reply #21 on: August 11, 2011, 12:08:26 AM »
I am guilty and apologize,
 
Hopefully he understands that it had nothing to do with him and will reply.
He has not been active since all these posts and would be great if they disappeared.

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
Re: Trignometry
« Reply #22 on: August 11, 2011, 12:10:04 AM »
I am guilty and apologize,
 
Hopefully he understands that it had nothing to do with him and will reply.
He has not been active since all these posts and would be great if they disappeared.
Oh come on, post #5 is solid gold.  :roll:
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Trignometry
« Reply #23 on: August 11, 2011, 12:35:38 AM »

I guess everyone here already knows everything and they never had the occasion to have to ask anyone for anything.
Yes, I've had to ask, and I do so by asking a question that is derived to achieve the answer I needed, not find out if someone might have the ability or aptitude to answer.  Because there is a difference.

Note:

Is anyone here good at trig, I mean really good

VS

Can someone tell me how to solve for or provide a solution to calculating the included angle in the following trigonometric equation? (Enter your equation here)

Which form do you believe will get me the answer or the process to answer the mathematical challenge I am being pressed with?
Be your Best


Michael Farrell
http://primeservicesglobal.com/

BlackBox

  • King Gator
  • Posts: 3770
Re: Trignometry
« Reply #24 on: August 11, 2011, 01:10:47 AM »
I am guilty and apologize,
 
Hopefully he understands that it had nothing to do with him and will reply.
He has not been active since all these posts and would be great if they disappeared.
Oh come on, post #5 is solid gold.  :roll:

Khan trumps Star Trek... Especially given Keith's moaning.  :wink:
"How we think determines what we do, and what we do determines what we get."

caddman6425

  • Guest
Re: Trignometry
« Reply #25 on: August 11, 2011, 02:07:01 AM »
Thanks all, I guess I really deserved this.  The question that I need help with is really long and drawn out, so I was thinking that before I tried to type everything out, I'd better find out if there was some people available right at the present to help.  I thought that I'd notified when I got answers, but I guess not, and I got so caught up trying to solve the problem that I forgot to check. Sorry all.  I'm attaching a drawing and I guess well start from there.  I'm trying to sole "o"

Jeff H

  • Needs a day job
  • Posts: 6144
Re: Trignometry
« Reply #26 on: August 11, 2011, 02:46:55 AM »
Are trying to find the arch length between 2 points is so using trim
 
 

caddman6425

  • Guest
Re: Trignometry
« Reply #27 on: August 11, 2011, 03:20:28 AM »
This is why I say that it is going to take some time to explain what I'm trying to accomplish.  There is four sections to the drawing. The first is the text, the second is the portion of the drawing that looks like a mess.  The two parell arcs represent a arched steal beam.   I'm trying to come up with an equation so as to solve the plum cut of the beam at any point along 1/2 the periphery of the arc.  The triangle that is formed by the beam depth and the unknown vertical cut, forms an oblique triangle, the oppsite side is not tangent to the arc.  The only knowns are the beam depth which is 10 and the adjcent angle of 19.47 deg.  I can sovle the right triangle with the angle an Hyp as well as the opp side, but I can sole the other angle of the oblique triangle since I don't have enough knowns.  This is where I need help, I've stared so close at all the trees, that I don't see the forest anymore.  I know that it is solvable, but I can't figure where the relatinships are to get me where I want to go.  There is a lot more, but I hate typing so I guess I'll go with the flow as it comes along.

SEANT

  • Bull Frog
  • Posts: 345
Re: Trignometry
« Reply #28 on: August 11, 2011, 03:38:52 AM »
I think that this is what you want:

o = SQRT((TAN(A)*10)^2 – (SIN(A)*10)^2)

Which should be 1.1785

The drawing has it at 1.1419, but the angle between the radius “c” and “h” is not 90 degrees.  Should it be 90?
Sean Tessier
AutoCAD 2016 Mechanical

caddman6425

  • Guest
Re: Trignometry
« Reply #29 on: August 11, 2011, 03:48:17 AM »
No it should not be 90, it isn't tangent to the arc.  The vertical line that intersect the top arc is th plum cut length.  When you form the triangle that small side is the intersection points of the triangle.  If it was tangent, then I'd have no problem.  You're equation is base on the ang being tangent or at 90 deg

SEANT

  • Bull Frog
  • Posts: 345
Re: Trignometry
« Reply #30 on: August 11, 2011, 04:00:03 AM »
I see it now. 
Sean Tessier
AutoCAD 2016 Mechanical

SEANT

  • Bull Frog
  • Posts: 345
Re: Trignometry
« Reply #31 on: August 11, 2011, 05:50:13 AM »
How about:
o = (COS(ASIN((170*SIN(A)))/180))*180) – (COS(A)*180)
Sean Tessier
AutoCAD 2016 Mechanical

SEANT

  • Bull Frog
  • Posts: 345
Re: Trignometry
« Reply #32 on: August 11, 2011, 06:26:05 AM »
This may be more succinct:
« Last Edit: August 11, 2011, 07:09:59 AM by SEANT »
Sean Tessier
AutoCAD 2016 Mechanical

Krushert

  • Seagull
  • Posts: 13679
  • FREE BEER Tomorrow!!
Re: Trignometry
« Reply #33 on: August 11, 2011, 08:05:23 AM »
Thanks all, I guess I really deserved this.
As mentioned before, we were picking on each other in good fun or at the very least I was.  None of this was directed at you, we just use your O.P. to get us going which as you can see does not take much.  And yes we get distracted with Squirrels and other things with bushy tails also.   So do not take it heart. 

From your problem I can see it is above my pay grade so I will leave it to the more knowledgeable ones.
Cheers.

Whoops forgot to read page three of this thread.  Ahh excel to rescue.   
« Last Edit: August 11, 2011, 09:18:08 AM by Krushert »
I + XI = X is true ...  ... if you change your perspective.

I no longer CAD or Model, I just hang out here picking up the empties beer cans

Stefan

  • Bull Frog
  • Posts: 319
  • The most I miss IRL is the Undo button
Re: Trignometry
« Reply #34 on: August 11, 2011, 08:52:36 AM »
Just the trig stuff..

[Edit] ... missed some text formatting ...
« Last Edit: August 11, 2011, 08:58:35 AM by Stefan »

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Trignometry
« Reply #35 on: August 11, 2011, 09:25:40 AM »
The above post proves my point; that a well formed question will yield a well formulated answer.

Although, I wonder why any use of 'trig' would be needed to 'solve' the unknown angles; given that it was drawn correctly in cad to start with?
Be your Best


Michael Farrell
http://primeservicesglobal.com/

caddman6425

  • Guest
Re: Trignometry
« Reply #36 on: August 11, 2011, 11:05:17 AM »
Writting a routine that draws all Steal Beams as structural members.  Can put into any configuration and in one configuration  need to know the plum cut programaticaly for ofset bearing points.  Yes I knew that it can be solved using lisp or a calculator but I had to prove it to understand it.

caddman6425

  • Guest
Re: Trignometry
« Reply #37 on: August 11, 2011, 06:14:24 PM »
I want to thank everyone that contributed to this question.  I did figre the solution this morning at about 2:00 A. M. but all of yours was helpfull.