Author Topic: empty resource dll  (Read 2881 times)

0 Members and 1 Guest are viewing this topic.

jbuzbee

  • Swamp Rat
  • Posts: 851
empty resource dll
« on: March 29, 2010, 03:23:31 PM »
Ok - I searched - I really did - but the link I found to the lily pond was broken - and subsequent googles yielded nothing.

Anyone have one?  Please?

There's many years of personal admiration in it for ya . . .. :wink:

Thanks!
James Buzbee
Windows 8

JohnK

  • Administrator
  • Seagull
  • Posts: 10648
Re: empty resource dll
« Reply #1 on: March 29, 2010, 03:36:19 PM »
This one?
TheSwamp.org (serving the CAD community since 2003)
Member location map - Add yourself

Donate to TheSwamp.org

GDF

  • Water Moccasin
  • Posts: 2081
Re: empty resource dll
« Reply #2 on: March 29, 2010, 03:40:21 PM »
Or this
Why is there never enough time to do it right, but always enough time to do it over?
BricsCAD 2020x64 Windows 10x64

LE3

  • Guest
Re: empty resource dll
« Reply #3 on: March 29, 2010, 03:42:51 PM »
or if this is for the old reshacker project... here is a link:
http://angusj.com/resourcehacker/

jbuzbee

  • Swamp Rat
  • Posts: 851
Re: empty resource dll
« Reply #4 on: March 29, 2010, 04:06:12 PM »
Thanks guys - I found one - I did a search on the internet, but not on my own system  :roll:

Thanks again.

James Buzbee
Windows 8

JohnK

  • Administrator
  • Seagull
  • Posts: 10648
Re: empty resource dll
« Reply #5 on: March 29, 2010, 04:10:47 PM »
So let me get this straight, you promise "many years of admiration" but then you retract it? ...I feel like Charlie Brown.
TheSwamp.org (serving the CAD community since 2003)
Member location map - Add yourself

Donate to TheSwamp.org

MP

  • Seagull
  • Posts: 17750
  • Have thousands of dwgs to process? Contact me.
Re: empty resource dll
« Reply #6 on: March 29, 2010, 04:24:26 PM »
I feel like Charlie Brown.

back off the carbs fatty
Engineering Technologist • CAD Automation Practitioner
Automation ▸ Design ▸ Drafting ▸ Document Control ▸ Client
cadanalyst@gmail.comhttp://cadanalyst.slack.comhttp://linkedin.com/in/cadanalyst

jbuzbee

  • Swamp Rat
  • Posts: 851
Re: empty resource dll
« Reply #7 on: March 29, 2010, 04:27:16 PM »
Se7en, you and Gary and Luis already have my utmost respect and admiration . . . I thought that was implied.

However, if you want me to publicly sing your praises:

You da best mang, luv you!    :kewl:

jb

you guys are too funny - I just can't stay away from this place!!!
James Buzbee
Windows 8

JohnK

  • Administrator
  • Seagull
  • Posts: 10648
Re: empty resource dll
« Reply #8 on: March 29, 2010, 04:29:39 PM »
I feel like Charlie Brown.
back off the carbs fatty

You're just lucky i dont have my own personal jet 'cause i would fly up to that arctic circle you call your back yard and kick you right in the knee caps.
TheSwamp.org (serving the CAD community since 2003)
Member location map - Add yourself

Donate to TheSwamp.org

JohnK

  • Administrator
  • Seagull
  • Posts: 10648
Re: empty resource dll
« Reply #9 on: March 29, 2010, 04:31:34 PM »
<snip>
You da best mang, luv you!    :kewl:
<snip>

[R. Lee Ermey] AHHhhh?![/R. Lee Ermey]
TheSwamp.org (serving the CAD community since 2003)
Member location map - Add yourself

Donate to TheSwamp.org

MP

  • Seagull
  • Posts: 17750
  • Have thousands of dwgs to process? Contact me.
Re: empty resource dll
« Reply #10 on: March 29, 2010, 04:35:27 PM »
You're just lucky i dont have my own personal jet 'cause i would fly up to that arctic circle you call your back yard and kick you right in the knee caps.

It would be better if you walked, that way you might be in shape by the time you go here.

Unless oblate spheroid-like was the desired shape, and in that case mojo sent.
Engineering Technologist • CAD Automation Practitioner
Automation ▸ Design ▸ Drafting ▸ Document Control ▸ Client
cadanalyst@gmail.comhttp://cadanalyst.slack.comhttp://linkedin.com/in/cadanalyst

JohnK

  • Administrator
  • Seagull
  • Posts: 10648
Re: empty resource dll
« Reply #11 on: March 29, 2010, 05:12:55 PM »
*blink* what-da?! `Oblate spheroid'?!

Quote
"Um... I don't even know where to start with you. I mean, do you even know who you're talkin' to?"

"Ya' listenin'? OK. Grass grows, birds fly, sun shines, and brotha'- I hurt people."

"I'm a force-a-nature!"

http://tf2wiki.net/wiki/Meet_the_Scout
TheSwamp.org (serving the CAD community since 2003)
Member location map - Add yourself

Donate to TheSwamp.org

MP

  • Seagull
  • Posts: 17750
  • Have thousands of dwgs to process? Contact me.
Re: empty resource dll
« Reply #12 on: March 29, 2010, 05:45:25 PM »
Engineering Technologist • CAD Automation Practitioner
Automation ▸ Design ▸ Drafting ▸ Document Control ▸ Client
cadanalyst@gmail.comhttp://cadanalyst.slack.comhttp://linkedin.com/in/cadanalyst

JohnK

  • Administrator
  • Seagull
  • Posts: 10648
Re: empty resource dll
« Reply #13 on: March 30, 2010, 08:34:05 AM »
* Se7en raises one eyebrow
TheSwamp.org (serving the CAD community since 2003)
Member location map - Add yourself

Donate to TheSwamp.org