« previous next »
Pages: 1 [2]  All |   Go Down

Author Topic: Select Multiple Files  (Read 7474 times)

0 Members and 1 Guest are viewing this topic.

MP

  • Seagull
  • Posts: 17750
  • Have thousands of dwgs to process? Contact me.
Re: Select Multiple Files
« Reply #15 on: July 18, 2007, 03:13:17 PM »
Quote from: Mark Thomas on July 18, 2007, 02:47:06 PM
Nice! Screen shot please. :-)



AutoCAD 2008 / OpenDCL 4.0 RC3 / Vista Ultra / Medium icon mode.

{  reduced colors to 256 after screen grab, it looks richer than this actually }
Logged
Engineering Technologist • CAD Automation Practitioner
Automation ▸ Design ▸ Drafting ▸ Document Control ▸ Client
cadanalyst@gmail.com • http://cadanalyst.slack.com • http://linkedin.com/in/cadanalyst

MP

  • Seagull
  • Posts: 17750
  • Have thousands of dwgs to process? Contact me.
Re: Select Multiple Files
« Reply #16 on: July 18, 2007, 03:36:04 PM »
Another piccy, same specs as before except detail view with multiple files selected ...

Logged
Engineering Technologist • CAD Automation Practitioner
Automation ▸ Design ▸ Drafting ▸ Document Control ▸ Client
cadanalyst@gmail.com • http://cadanalyst.slack.com • http://linkedin.com/in/cadanalyst

LE

  • Guest
Re: Select Multiple Files
« Reply #17 on: July 18, 2007, 06:41:38 PM »
Quote from: CADaver on July 18, 2007, 11:08:03 AM
About half our staff is still running R2002

I have not read anywhere if it is going to be available for pre - 2004 AutoCAD versions.... maybe it will - the arx binaries I have seen are for 2004-2008
Logged

CADaver

  • Guest
Re: Select Multiple Files
« Reply #18 on: July 18, 2007, 06:59:27 PM »
Quote from: LE on July 18, 2007, 06:41:38 PM
Quote from: CADaver on July 18, 2007, 11:08:03 AM
About half our staff is still running R2002

I have not read anywhere if it is going to be available for pre - 2004 AutoCAD versions.... maybe it will - the arx binaries I have seen are for 2004-2008
By the end of the year we hope to be fully embedded with R2008
Logged

LE

  • Guest
Re: Select Multiple Files
« Reply #19 on: July 18, 2007, 07:07:37 PM »
Quote from: CADaver on July 18, 2007, 06:59:27 PM
By the end of the year we hope to be fully embedded with R2008

That it is going to be good! - I just started with a2007 jumping from a2005, have my copy of a2008 and do not know when I am going to start with that....  :-(

Note to the people from OpenDCL... Where is the information about what AutoCAD and verticals products OpenDCL will be supporting? - Thank you - in the mean time I'll go and check their new site.
Logged

Kerry

  • Mesozoic relic
  • Seagull
  • Posts: 11654
  • class keyThumper<T>:ILazy<T>
Re: Select Multiple Files
« Reply #20 on: July 18, 2007, 07:11:58 PM »
Quote from: LE on July 18, 2007, 07:07:37 PM
Note to the people from OpenDCL... Where is the information about what AutoCAD and verticals products OpenDCL will be supporting? - Thank you - in the mean time I'll go and check their new site.

http://www.opendcl.com/HelpFiles/main.html
Logged
kdub, kdub_nz in other timelines.
Perfection is not optional.
Everything will work just as you expect it to, unless your expectations are incorrect.
Discipline: None at all.

LE

  • Guest
Re: Select Multiple Files
« Reply #21 on: July 18, 2007, 07:13:16 PM »
Quote from: Kerry Brown on July 18, 2007, 07:11:58 PM
Quote from: LE on July 18, 2007, 07:07:37 PM
Note to the people from OpenDCL... Where is the information about what AutoCAD and verticals products OpenDCL will be supporting? - Thank you - in the mean time I'll go and check their new site.

http://www.opendcl.com/HelpFiles/main.html

Perfect! thanks.
Logged
Pages: 1 [2]  All |   Go Up
« previous next »