« previous next »
Pages: [1] |   Go Down

Author Topic: Command will not move  (Read 1466 times)

0 Members and 1 Guest are viewing this topic.

One Shot

  • Guest
Command will not move
« on: April 28, 2008, 03:32:25 PM »
I am running ACAD2008 and I accidently moved the command away from being docked.  Now when I try to put it back, it will not move. Any suggestions to move it.

Thank you,

Brad
Logged

daron

  • Guest
Re: Command will not move
« Reply #1 on: April 28, 2008, 03:34:22 PM »
Right click on the toolbar area and see if "lock location" for floating objects is checked. If so, uncheck it. Should solve the prob.
Logged

Guest

  • Guest
Re: Command will not move
« Reply #2 on: April 28, 2008, 03:36:12 PM »
Quote from: Daron on April 28, 2008, 03:34:22 PM
Right click on the toolbar area and see if "lock location" for floating objects is checked. If so, uncheck it. Should solve the prob.

OR... instead of unlocking, you can hold the CTRL key and click on your toolbar and then move it around.
Logged

daron

  • Guest
Re: Command will not move
« Reply #3 on: April 28, 2008, 03:37:06 PM »
Cool. Didn't know that.
Logged

M-dub

  • Guest
Re: Command will not move
« Reply #4 on: April 28, 2008, 03:42:15 PM »
Holding CTRL down will also prevent a toolbar from docking if you get it close to the rest of its friends.
:)
Logged

One Shot

  • Guest
Re: Command will not move
« Reply #5 on: April 28, 2008, 03:59:09 PM »
Thank you for your help.  I looked there before, but I didn't notice the ALL flyout. 


Brad
Logged

Bob Garner

  • Guest
Re: Command will not move
« Reply #6 on: April 28, 2008, 04:03:06 PM »
Sometimes I mess up my on-screen settings.  I saved my initial workspace with a name and when thinks go missing or something, I can just recall my saved workspace.

Bob G.
Logged
Pages: [1] |   Go Up
« previous next »