A question which should be answered first, how did you arrive to this situation?In fact this file I recives from our branch in another country. They making kiling mistakes like this and saying we are not profesional in AutoCAD same as you, Hassan please fixing errors.
The incorrect text from the mirror is a result of MIRRTEXT (http://help.autodesk.com/view/ACD/2016/ENU/?guid=GUID-D55D2D18-B26E-4525-B5E4-03A2A07FB5F6) being set to 1.Thanks for your solution but when run the lisp the blocks moves to aother place
When you list both blocks, you'll notice a difference of the extrusion direction relative to UCS. The blocks are not on the same UCS.It is very good way, But these are 3 files with thounds of blocks with this error.
Z=-1 means that you look at that block from behind.
You can fix this with the ALIGN command.
You'll need 3 points:
- end of arc > other end of arc
- corner 1 > opposite of corner 1
- other corner > opposite of other corner
This seems to work with your example drawing:When you list both blocks, you'll notice a difference of the extrusion direction relative to UCS. The blocks are not on the same UCS.It is very good way, But these are 3 files with thounds of blocks with this error.
Z=-1 means that you look at that block from behind.
You can fix this with the ALIGN command.
You'll need 3 points:
- end of arc > other end of arc
- corner 1 > opposite of corner 1
- other corner > opposite of other corner
...Thnaks Ron
This seems to work with your example drawing:
...
If you have many of these to do why are you picking each one manually? Give the code below a try .. although you're going to have to also account for the current attribute values too.Thanks Ron for your value help
You're welcome :)If you have many of these to do why are you picking each one manually? Give the code below a try .. although you're going to have to also account for the current attribute values too.Thanks Ron for your value help