TheSwamp

CAD Forums => CAD General => Topic started by: Fabricio28 on April 18, 2017, 02:32:08 PM

Title: Overkill isn't working
Post by: Fabricio28 on April 18, 2017, 02:32:08 PM

Hi all

How are you?

I want to know how to use OVERKILL to remove duplicate or overlapping lines, arcs, and polylines.

I couldn't remove duplicate arcs and polylines from my drawing.

File is attached

Thanks
Fabricio

Title: Re: Overkill isn't working
Post by: ChrisCarlson on April 18, 2017, 03:16:43 PM

Your main arc does not have an underlying arc. They are two separate entities with different start and end points.

Title: Re: Overkill isn't working
Post by: Fabricio28 on April 18, 2017, 03:22:00 PM

Quote from: Master_Shake on April 18, 2017, 03:16:43 PM

Your main arc does not have an underlying arc. They are two separate entities with different start and end points.

Thanks for replay.

There are lines and arcs overlaping and I don't know how to fix it.

Title: Re: Overkill isn't working
Post by: CAB on April 18, 2017, 03:36:11 PM

You might try the flatten command. If I remember correctly it may combine some objects.

Title: Re: Overkill isn't working
Post by: CAB on April 18, 2017, 03:39:58 PM

I take that back, Overkill is the one I was thinking about.
Maybe your tolerance setting it too small.
https://knowledge.autodesk.com/support/autocad-lt/learn-explore/caas/CloudHelp/cloudhelp/2017/ENU/AutoCAD-LT/files/GUID-0916FE53-F816-4C40-AA5E-5E8CBFD7F73F-htm.html

Title: Re: Overkill isn't working
Post by: Fabricio28 on April 18, 2017, 03:52:12 PM

Quote from: CAB on April 18, 2017, 03:39:58 PM

I take that back, Overkill is the one I was thinking about.
Maybe your tolerance setting it too small.
https://knowledge.autodesk.com/support/autocad-lt/learn-explore/caas/CloudHelp/cloudhelp/2017/ENU/AutoCAD-LT/files/GUID-0916FE53-F816-4C40-AA5E-5E8CBFD7F73F-htm.html

Thanks CAB

https://knowledge.autodesk.com/support/autocad-lt/learn-explore/caas/CloudHelp/cloudhelp/2017/ENU/AutoCAD-LT/files/GUID-0916FE53-F816-4C40-AA5E-5E8CBFD7F73F-htm.html (https://knowledge.autodesk.com/support/autocad-lt/learn-explore/caas/CloudHelp/cloudhelp/2017/ENU/AutoCAD-LT/files/GUID-0916FE53-F816-4C40-AA5E-5E8CBFD7F73F-htm.html)
Combine End to End
Objects that have common endpoints are combined into single objects.

The lines isn't have common endpoints in my drawing.
So I can't remove these lines.  :cry:

Title: Re: Overkill isn't working
Post by: MSTG007 on April 18, 2017, 04:30:08 PM

That would be cool if there was a way to do that.

Title: Re: Overkill isn't working
Post by: Fabricio28 on April 18, 2017, 05:50:46 PM

Quote from: MSTG007 on April 18, 2017, 04:30:08 PM

That would be cool if there was a way to do that.

I totally agree. :-)

Fabricio

Title: Re: Overkill isn't working
Post by: dtkell on April 18, 2017, 06:22:12 PM

Will not the "combine linear objects that partially overlap" not work because of being arcs?

Title: Re: Overkill isn't working
Post by: CAB on April 18, 2017, 06:25:06 PM

You might give this a try.
http://www.manusoft.com/software/superpurge.html

Title: Re: Overkill isn't working
Post by: CAB on April 18, 2017, 06:30:51 PM

Another one to look at:  http://www.totalpurge.com/

I have not tried nor endorse this programs just did an internet search for you.

Title: Re: Overkill isn't working
Post by: MSTG007 on April 18, 2017, 07:03:55 PM

I gotta try this out tomorrow. Thanks for the find CAB.