TheSwamp

CAD Forums => CAD General => Topic started by: Fabricio28 on September 22, 2016, 08:21:47 AM

Title: Wipeout ins't hide
Post by: Fabricio28 on September 22, 2016, 08:21:47 AM: Hi guys,

How are you.

I couldn't hide the layer -MALHA with wipeout command.

I don't know what's wrong.

Anybody could help me out, please!

I'm attaching the pdf and dwg file.

Thanks
Title: Re: Wipeout ins't hide
Post by: Rob... on September 22, 2016, 08:30:15 AM: Display order - send to back
Title: Re: Wipeout ins't hide
Post by: Fabricio28 on September 22, 2016, 08:36:31 AM: Quote from: Rob... on September 22, 2016, 08:30:15 AM
Display order - send to back

Isn't working for me...

When I print the file that crazy line shows up.
Title: Re: Wipeout ins't hide
Post by: Rob... on September 22, 2016, 08:57:29 AM: That's why I don't use wipeouts.
Title: Re: Wipeout ins't hide
Post by: Fabricio28 on September 22, 2016, 09:27:36 AM: Quote from: Rob... on September 22, 2016, 08:57:29 AM
That's why I don't use wipeouts.

Wipeouts are not good.

I've created but isn't working properly.
Title: Re: Wipeout ins't hide
Post by: Rob... on September 22, 2016, 09:29:52 AM: IMHO, they have always yielded inconsistent results.
Title: Re: Wipeout ins't hide
Post by: ChrisCarlson on September 22, 2016, 09:44:23 AM: Try using a solid hatch set to print to 255,255,255.

Only items behind the wipeout are hidden, by sending the wipeout to the back nothing is hidden.
Title: Re: Wipeout ins't hide
Post by: Rob... on September 22, 2016, 09:45:45 AM: Don't send the wipeout to the back. Send the items you want to hide to the back. (I thought that was clear.)
Title: Re: Wipeout ins't hide
Post by: Fabricio28 on September 22, 2016, 10:01:00 AM: Quote from: Rob... on September 22, 2016, 09:45:45 AM
Don't wend the wipeout to the back. Send the items you want to hide to the back. (I thought that was clear.)

I don't understand why only one rectangle worked fine.
Title: Re: Wipeout ins't hide
Post by: Fabricio28 on September 22, 2016, 10:03:56 AM: Quote from: Master_Shake on September 22, 2016, 09:44:23 AM
Try using a solid hatch set to print to 255,255,255.

Only items behind the wipeout are hidden, by sending the wipeout to the back nothing is hidden.

Hi Master_Shake

Isn't working too..
Title: Re: Wipeout ins't hide
Post by: Rob... on September 22, 2016, 10:10:49 AM: One more try. Send the objects on layer -MALHA to the back. That should be clear now.
Title: Re: Wipeout ins't hide
Post by: ChrisCarlson on September 22, 2016, 10:14:05 AM: Check your layer settings for VIEWPORT

:hint: it's on a non-plottable layer

Also why do you have wipeouts on top of wipeouts?
Title: Re: Wipeout ins't hide
Post by: Rob... on September 22, 2016, 10:19:47 AM: Yeah, good catch. The wipeout won't hide anything during printing if it is set to not plot. I totally missed that.
Title: Re: Wipeout ins't hide
Post by: Fabricio28 on September 22, 2016, 10:33:23 AM: Quote from: Master_Shake on September 22, 2016, 10:14:05 AM
Check your layer settings for VIEWPORT

:hint: it's on a non-plottable layer

Also why do you have wipeouts on top of wipeouts?

Thank you!!!!!!!
Very happy :)

and:
Command: WIPEOUT
Specify first point or [Frames/Polyline] <Polyline>: F
Enter mode [ON/OFF/Display but not plot] <ON>: D

Thanks perfect
Title: Re: Wipeout ins't hide
Post by: Fabricio28 on September 22, 2016, 10:33:47 AM: Quote from: Rob... on September 22, 2016, 10:19:47 AM
Yeah, good catch the wipeout won't hide anything during printing if it is set to not plot. I totally missed that.

Thank you too Rob.

Regards