TheSwamp

CAD Forums => Vertically Challenged => Architecturally Speaking => Topic started by: Anonymous on December 09, 2004, 05:17:07 AM

Title: Hatch pattern for a 65x215mm brick wanted
Post by: Anonymous on December 09, 2004, 05:17:07 AM

Does anyone have a hatch pattern for this size brick with a 10mm space between for the mortar. I have found long, thin ones and short fat ones, but not what I want....

Title: Hatch pattern for a 65x215mm brick wanted
Post by: Keith™ on December 09, 2004, 10:35:38 AM

Try this.....

Code: [Select]


;;;Custom Hatch Pattern
;;;Copyright 2004 by RCI
*BR65-215-M, 65mmx215mm brick elevation stretcher bond with 10mm mortar joints
0,0,0,112.5,75,215,-10
0,-112.5,10,112.5,75,215,-10
90,0,0,75,112.5,-85,65
90,-10,0,75,112.5,-85,65


Save this into the acad support folder as
BR65-215-M.PAT

Enjoy

Title: Hatch pattern for a 65x215mm brick wanted
Post by: Anonymous on December 10, 2004, 05:03:40 AM

Keith - you are wonderful - this is exactly what I wanted.

Many thanks

Linda

Title: Hatch pattern for a 65x215mm brick wanted
Post by: Keith™ on December 10, 2004, 08:56:30 AM

Well, then how about registering and coming back for more....we have some very good people here.