TheSwamp

CAD Forums => CAD General => Topic started by: MSTG007 on June 25, 2004, 10:02:14 AM

Title: how to set up working sheet drawings...
Post by: MSTG007 on June 25, 2004, 10:02:14 AM

have a base drawing

then create sheet dwgins which reference the base drawing

then have a title block which is referenced into all sheet files...

Title: how to set up working sheet drawings...
Post by: ELOQUINTET on June 25, 2004, 10:19:19 AM

ummm is that a  :?:  or a  :!:

Title: how to set up working sheet drawings...
Post by: Slim© on June 25, 2004, 10:25:37 AM

I think it's MSTG007's way of setting up working drawings.

Not bad, maybe a little more explaination is needed tho.

Title: how to set up working sheet drawings...
Post by: t-bear on June 25, 2004, 10:46:35 AM

So how do you deal with dims?  We have one sheet with top/elev views, dimensioned, one sheet with isos, dimensioned,and one sheet with a cut-list (sometimes as many as 50 parts) .......  Dims display from one sheet to the next and naming them to keep them separated is a pain............  I'm looking for suggestions here.  We WENT to 2K4 so we could dim in PS but if you have a loooong part that you create a broken view of in 2 or more vports, this is un-usable....it gives you the PS length, not the ACTUAL length. Soooo, we're back to dims in MS with all the ensuing layer-naming hassles.
Any thoughts/suggestions/comments?