TheSwamp
CAD Forums => CAD General => Topic started by: Fabricio28 on September 22, 2016, 08:21:47 AM
-
Hi guys,
How are you.
I couldn't hide the layer -MALHA with wipeout command.
I don't know what's wrong.
Anybody could help me out, please!
I'm attaching the pdf and dwg file.
Thanks
-
Display order - send to back
-
Display order - send to back
Isn't working for me...
When I print the file that crazy line shows up.
-
That's why I don't use wipeouts.
-
That's why I don't use wipeouts.
Wipeouts are not good.
I've created but isn't working properly.
-
IMHO, they have always yielded inconsistent results.
-
Try using a solid hatch set to print to 255,255,255.
Only items behind the wipeout are hidden, by sending the wipeout to the back nothing is hidden.
-
Don't send the wipeout to the back. Send the items you want to hide to the back. (I thought that was clear.)
-
Don't wend the wipeout to the back. Send the items you want to hide to the back. (I thought that was clear.)
I don't understand why only one rectangle worked fine.
-
Try using a solid hatch set to print to 255,255,255.
Only items behind the wipeout are hidden, by sending the wipeout to the back nothing is hidden.
Hi Master_Shake
Isn't working too..
-
One more try. Send the objects on layer -MALHA to the back. That should be clear now.
-
Check your layer settings for VIEWPORT
:hint: it's on a non-plottable layer
Also why do you have wipeouts on top of wipeouts?
-
Yeah, good catch. The wipeout won't hide anything during printing if it is set to not plot. I totally missed that.
-
Check your layer settings for VIEWPORT
:hint: it's on a non-plottable layer
Also why do you have wipeouts on top of wipeouts?
Thank you!!!!!!!
Very happy :)
and:
Command: WIPEOUT
Specify first point or [Frames/Polyline] <Polyline>: F
Enter mode [ON/OFF/Display but not plot] <ON>: D
Thanks perfect
-
Yeah, good catch the wipeout won't hide anything during printing if it is set to not plot. I totally missed that.
Thank you too Rob.
Regards