« previous next »
Pages: [1] 2  All |   Go Down

Author Topic: Training, but what type?  (Read 3590 times)

0 Members and 1 Guest are viewing this topic.

M-dub

  • Guest
Training, but what type?
« on: May 09, 2005, 11:52:20 AM »
Ok, this is a weird question, but bear with me.

In our field, Paperspace is not widely used.  In fact, it would be safe to say that in 9 years, I could probably count the number of times I've had to use it on one hand.  Now, because I'm kind of the Jack-of-all-Master-of-none, I've got to become more advanced in this area.  Now, since this topic has come up with the higher ups here, they've basically asked me to go out and find some kind of course or training that would relate to this.  I doubt if I'll find something specifically related to Paperspace, but it would likely be covered in some other kind of course.  (Basic AutoCAD 101? :twisted: )

I guess what I would really like to know is whether I should maybe look for a general refresher course that covers a great deal of AutoCAD or something more specific?  Also, if you know of anything online, that would be a viable option as well.

Ideas?  Suggestions?

Thanks folks!  :D
Logged

MP

  • Seagull
  • Posts: 17750
  • Have thousands of dwgs to process? Contact me.
Training, but what type?
« Reply #1 on: May 09, 2005, 12:01:01 PM »
This is ancient (around 1995), but I recall thinking back then that it was a good start for noobs. Good enough that I remembered the url after so many years. I didn't check it out today (content wise) but I'm guessing it has stood the test of time.
Logged
Engineering Technologist • CAD Automation Practitioner
Automation ▸ Design ▸ Drafting ▸ Document Control ▸ Client
cadanalyst@gmail.com • http://cadanalyst.slack.com • http://linkedin.com/in/cadanalyst

M-dub

  • Guest
Training, but what type?
« Reply #2 on: May 09, 2005, 12:02:28 PM »
Quote from: MP
...a good start for noobs....


 :oops:

:lol:  Thanks, MP.  I'll check it out.
Logged

MP

  • Seagull
  • Posts: 17750
  • Have thousands of dwgs to process? Contact me.
Training, but what type?
« Reply #3 on: May 09, 2005, 12:03:25 PM »
Paperspace noobs that is. :oops:

;)
Logged
Engineering Technologist • CAD Automation Practitioner
Automation ▸ Design ▸ Drafting ▸ Document Control ▸ Client
cadanalyst@gmail.com • http://cadanalyst.slack.com • http://linkedin.com/in/cadanalyst

Mark

  • Custom Title
  • Seagull
  • Posts: 28762
Training, but what type?
« Reply #4 on: May 09, 2005, 12:12:21 PM »
What about if you learn it then teach it to all your folks. Maybe pickup a couple extra $$ along the way.
Logged
TheSwamp.org  (serving the CAD community since 2003)

SPDCad

  • Bull Frog
  • Posts: 453
Training, but what type?
« Reply #5 on: May 09, 2005, 12:16:44 PM »
Quote from: Mark Thomas
What about if you learn it then teach it to all your folks. Maybe pickup a couple extra $$ along the way.


Good luck there. I have tried that with my boss and he refuses to pay me.  The guys at my office need some serious upgrading but unless I get payed for it, it is not going to happen at my place of employment.
Logged
AutoCAD 2010, w/ OpenDCL

visit: http://reachme.at/spd_designs

MP

  • Seagull
  • Posts: 17750
  • Have thousands of dwgs to process? Contact me.
Training, but what type?
« Reply #6 on: May 09, 2005, 12:18:34 PM »
Teach. The money will come. Nothwithstanding, teaching produces rewards that have nothing to do with money.

:)
Logged
Engineering Technologist • CAD Automation Practitioner
Automation ▸ Design ▸ Drafting ▸ Document Control ▸ Client
cadanalyst@gmail.com • http://cadanalyst.slack.com • http://linkedin.com/in/cadanalyst

M-dub

  • Guest
Training, but what type?
« Reply #7 on: May 09, 2005, 12:27:39 PM »
Quote from: MP
...teaching produces rewards that have nothing to do with money.


Stress Relief!  If I were able to teach a certain someone here, and have him retain it, Drawings would be much better and I wouldn't be sitting here, grumbling to myself about him and the drawings he just screwed up!
Logged

daron

  • Guest
Training, but what type?
« Reply #8 on: May 09, 2005, 01:06:35 PM »
Repetition!
Logged

daron

  • Guest
Training, but what type?
« Reply #9 on: May 09, 2005, 01:07:04 PM »
Quote from: Daron
Repetition!

Repetition!
Logged

daron

  • Guest
Training, but what type?
« Reply #10 on: May 09, 2005, 01:07:21 PM »
Quote from: Daron
Quote from: Daron
Repetition!

Repetition!

Repetition!
Logged

daron

  • Guest
Training, but what type?
« Reply #11 on: May 09, 2005, 01:08:12 PM »
Of course, no amount of Repetition! overcomes lack of humility <teachability.
Logged

Keith™

  • Villiage Idiot
  • Seagull
  • Posts: 16899
  • Superior Stupidity at its best
Training, but what type?
« Reply #12 on: May 09, 2005, 01:16:06 PM »
Daron, I didn't quite understand what you meant, could you tell me again?
Logged
Proud provider of opinion and arrogance since November 22, 2003 at 09:35:31 am
CadJockey Militia Field Marshal

Find me on https://parler.com @kblackie

Dent Cermak

  • Guest
Training, but what type?
« Reply #13 on: May 09, 2005, 01:16:53 PM »
M-DUB, here is what you need:

http://www.agtcad.com/products/training/paperspace.htm


Check it out. I can recommend this outfit.
Logged

daron

  • Guest
Training, but what type?
« Reply #14 on: May 09, 2005, 01:17:05 PM »
NO!
Logged
Pages: [1] 2  All |   Go Up
« previous next »