Well here's the goods on it. First, activeX dump:
Command: dumpit
Select object:
; IAcadLeader: AutoCAD Leader Interface
; Property values:
; Annotation = #<VLA-OBJECT IAcadMText 02ef0934>
; Application (RO) = #<VLA-OBJECT IAcadApplication 00a88728>
; ArrowheadBlock = "ldrblk"
; ArrowheadSize = 0.0625
; ArrowheadType = 20
; Color = 256
; Coordinate = ...Indexed contents not shown...
; Coordinates = (1402.72 238.071 0.0 1450.57 285.921 0.0 ... )
; DimensionLineColor = 256
; DimensionLineWeight = -2
; Document (RO) = #<VLA-OBJECT IAcadDocument 0108e50c>
; Handle (RO) = "12D6"
; HasExtensionDictionary (RO) = 0
; Hyperlinks (RO) = #<VLA-OBJECT IAcadHyperlinks 02ef0814>
; Layer = "0"
; Linetype = "BYLAYER"
; LinetypeScale = 1.0
; Lineweight = -1
; Normal (RO) = (0.0 0.0 1.0)
; ObjectID (RO) = 1077959792
; ObjectName (RO) = "AcDbLeader"
; OwnerID (RO) = 1074641936
; PlotStyleName = "Normal"
; ScaleFactor = 48.0
; StyleName = "arch"
; TextGap = 0.03125
; Type = 2
; VerticalTextPosition = 1
; Visible = -1
; Methods supported:
; ArrayPolar (3)
; ArrayRectangular (6)
; Copy ()
; Delete ()
; Evaluate ()
; GetBoundingBox (2)
; GetExtensionDictionary ()
; GetXData (3)
; Highlight (1)
; IntersectWith (2)
; Mirror (2)
; Mirror3D (3)
; Move (2)
; Rotate (2)
; Rotate3D (3)
; ScaleEntity (2)
; SetXData (2)
; TransformBy (1)
; Update ()
Command:
Next, dxf dump:
Command: ent
Select Object:
Data for selected entity:
(-1 . <Entity name: 40405c70>)
(0 . "LEADER")
(330 . <Entity name: 400dbc10>)
(5 . "12D6")
(100 . "AcDbEntity")
(67 . 0)
(410 . "Model")
(8 . "0")
(380 . 2)
(100 . "AcDbLeader")
(3 . "arch")
(71 . 1)
(72 . 0)
(73 . 0)
(74 . 0)
(75 . 1)
(40 . 3.0)
(41 . 3.88929)
(76 . 5)
(10 1402.72 238.071 0.0)
(10 1450.57 285.921 0.0)
(10 1505.14 300.542 0.0)
(10 1541.61 261.068 0.0)
(10 1544.61 261.068 0.0)
(340 . <Entity name: 40405c78>)
(211 1.0 0.0 0.0)
(210 0.0 0.0 1.0)
(212 0.0 0.0 0.0)
(213 0.0 0.0 0.0)
Command:
Finally, can you pedit the leader?:
Command: pedit Select polyline or [Multiple]:
Object selected is not a polyline
Select polyline or [Multiple]: Select polyline or [Multiple]: *Cancel*
Apparently not. So, can you get rid of any Coordinates or (10 . ####)? Not easily, if at all.
Moving the vertice, I feel would only move the vertice, not make it update with the vertice it is under, but who knows, I haven't tried it. Have fun.