« previous next »
Pages: [1] |   Go Down

Author Topic: help with join dimension lisp  (Read 1264 times)

0 Members and 1 Guest are viewing this topic.

PM

  • Guest
help with join dimension lisp
« on: August 08, 2020, 12:57:43 PM »
Hi i find here https://autocadtips1.com/2014/05/27/autolisp-updated-join-dimensions-for-autocad-2014-2015/ a lisp to join dimension. This code works fine but in my autocad the results is not corect because i use different agnle and direction units. Can any one fix it?

Code - Auto/Visual Lisp: [Select]
  1.  
  2. ;Shusei Hayashi
  3. ;OffshoreCad&Management Inc.
  4. ;10F Jaka Bldg., 6780 Ayala Ave.,
  5. ;Makati, Philippines
  6. ;http://www.offshorecad.com.ph/
  7. ;http://www.offshore-management.com.ph/
  8. ; Slightly modified to work with AutoCAD 2014 & 2015
  9. ; Greg Battin www.autocadtips.wordpress.com
  10. ;
  11.  
  12. (defun c:JDIMS( /  Flag ObjName1 ObjName2 Ang Ang2 Pt1 Pt2 Pt3 Pt4)
  13.         (princ "\n convert two dimensions to total Dimension on the same position")
  14.         (princ "\n **********************************")
  15.         (setq *error* *myerror*)  
  16.         (SD1028)
  17.         (setq LegLen 7.0)
  18.         (setq Flag nil)
  19.         (get_layer&ltype&color)
  20.         (RegistryRead_1001)
  21.         (setvar "Clayer" Lay1)
  22.         (setvar "Cecolor" Col1)
  23.         (setvar "Celtype" LT1)
  24.         (while (= Flag nil)
  25.            (setq ObjName1 (car (entsel "\n Select 1st Dimension :")))
  26.                 (if (and ObjName1(= (cdr (assoc 0 (setq Data1 (entget ObjName1)))) "DIMENSION"))
  27.                         (setq Flag T)
  28.                 )
  29.         )
  30.         (redraw ObjName1 3)
  31.         (setq theStyle (SD3511 3 ObjName1))
  32.         (setq Flag nil)
  33.         (while (= Flag nil)
  34.                 (setq ObjName2 (car (entsel "\n Select 2nd Dimension :")))
  35.                 (if     (and    ObjName2
  36.                                 (= (cdr (assoc 0 (setq Data2 (entget ObjName2)))) "DIMENSION")
  37.                                 (or     (equal (abs (- (cdr (assoc 50 Data1))(cdr (assoc 50 Data2)))) 0.0 0.0001)
  38.                                         (equal (abs (- (cdr (assoc 50 Data1))(cdr (assoc 50 Data2)))) pi 0.0001)
  39.                                 )
  40.                         )
  41.                         (setq Flag T)
  42.                                 (princ "\n two dimensions should have same angle")
  43.                 )
  44.         )
  45.         (redraw ObjName1 4)
  46.        
  47.         ;
  48.         (setq PList (list (cdr (assoc 13 Data1))(cdr (assoc 14 Data1))(cdr (assoc 13 Data2))(cdr (assoc 14 Data2))))
  49.         ;
  50.         (setq PList2 (list (cdr (assoc 10 Data1)) (cdr (assoc 10 Data2))))
  51.         ;
  52.         (if (/= (distance (cdr (assoc 14 Data1))(cdr (assoc 10 Data1))) 0)
  53.                 (setq Ang (angle (cdr (assoc 14 Data1))(cdr (assoc 10 Data1))))
  54.                 (setq Ang (+ (angle (cdr (assoc 13 Data1))(cdr (assoc 14 Data1))) (* 0.5 pi)))
  55.         )
  56.        
  57.         (setq Ang2 (+ Ang (* -0.5 pi)))
  58.         ;?C[
  59.         (setq ItsLayer (cdr (assoc 8 Data1)))
  60.        
  61.         ;
  62.         (setq PList_n (mapcar '(lambda(x)(SD1862 x Ang2))PList))
  63.         (setq PList2_n (mapcar '(lambda(x)(SD1862 x Ang2))PList2))
  64.         ;
  65.         (setq PList_n_x (mapcar 'car PList_n))
  66.         ;
  67.         (setq PList2_n_y (mapcar 'cadr PList2_n))
  68.        
  69.         ;
  70.         (setq Position1 (vl-position (apply 'min PList_n_x) PList_n_x))
  71.         ;
  72.         (setq Position2 (vl-position (apply 'max PList_n_x) PList_n_x))
  73.         ;
  74.         (setq Position3 (vl-position (apply 'max PList2_n_y) PList2_n_y))
  75.        
  76.        
  77.         (setq Pt1 (nth Position1 PList))
  78. ;       (checkcircle Pt1 1.0 "A21")
  79.         (setq Pt2 (nth Position2 PList))
  80. ;       (checkcircle Pt2 1.0 "A31")
  81.         (setq Pt3 (nth Position3 PList2))
  82. ;       (checkcircle Pt3 1.0 "A51")
  83. ;       (setq Pt4 (polar Pt3 Ang (* LegLen Scale)))
  84. ;       (checkcircle Pt4 1.0 "A21")
  85.        
  86.         (setq   Pt1 (trans Pt1 0 1)
  87.                         Pt2 (trans Pt2 0 1)
  88.                         Pt3 (trans Pt3 0 1)
  89. ;                       Pt4 (trans Pt4 0 1)
  90.         )
  91.         (setq UAng (angle '(0 0) (getvar "UCSXDIR")))
  92.         (setq Ang2 (- Ang2 UAng))
  93.         (command "._dimstyle" "RE" theStyle)
  94.         (command "dimrotated" (* 180 (/ Ang2 pi)) Pt1 Pt2 Pt3)
  95.         (command "change" (entlast) "" "P" "LA" ItsLayer "")
  96.         (entdel ObjName1)(entdel ObjName2)
  97.        
  98.         (SD2056)
  99.         (setq *error* nil)
  100.         (princ)
  101. )
  102. ;-----------------------------------------
  103. (defun RegistryRead_1001()
  104.         (setq Path1001 "HKEY_CURRENT_USER\\Software\\SpeedDraftLT\\SD_1001")
  105.         (if (vl-registry-read Path1001 "LegLen" )
  106.                 (progn  (set_tile "LegLen" (vl-registry-read Path1001 "LegLen"))
  107.                                 (setq LegLen (atof (vl-registry-read Path1001 "LegLen")))
  108.                 )
  109.                 (setq LegLen 7.0)
  110.         )
  111.         (if (and (vl-registry-read Path1001 "Lay1" )(member (vl-registry-read Path1001 "Lay1") Laylist1))
  112.                 (progn  (set_tile "Lay1" (itoa (vl-position (vl-registry-read Path1001 "Lay1") Laylist1)))
  113.                                 (setq Lay1 (vl-registry-read Path1001 "Lay1"))
  114.                 )
  115.                 (progn  (setq Lay1 (getvar "Clayer"))(set_tile "Lay1" (itoa (vl-position Lay1 Laylist1))))
  116.         )
  117.         (if (and (vl-registry-read Path1001 "LT1" )(member (vl-registry-read Path1001 "LT1") Laylist3))
  118.                 (progn  (set_tile "LT1" (itoa (vl-position (vl-registry-read Path1001 "LT1") Laylist3)))
  119.                                 (setq LT1 (vl-registry-read Path1001 "LT1"))
  120.                 )
  121.                 (progn  (setq LT1 "ByLayer")(set_tile "LT1" "0"))
  122.         )
  123.         (if (and (vl-registry-read Path1001 "Col1" )(member (vl-registry-read Path1001 "Col1") Laylist2))
  124.                 (progn  (set_tile "Col1" (itoa (vl-position (vl-registry-read Path1001 "Col1") Laylist2)))
  125.                                 (setq Col1 (vl-registry-read Path1001 "Col1"))
  126.                 )
  127.                 (progn  (setq Col1 "ByLayer")(set_tile "Col1" "0"))
  128.         )
  129. )
  130. ;----------------
  131. (defun SD1028 ()
  132.   (setq OldCmdEcho (getvar "CMDECHO"))
  133.   (setvar "CMDECHO" 0)
  134.   (command "undo" "be")
  135.   (setq OldOsmode (getvar "OSMODE"))
  136.   (setq OldLayer (getvar "CLAYER"))
  137.   (setq OldLType (getvar "CeLType"))
  138.   (setq OldCeLWeight (getvar "CeLWeight"))
  139.   (setq OldColor (getvar "CeColor"))
  140.   (setq OldOrtho (getvar "ORTHOMODE"))
  141.   (setq OldDStyle  (getvar "DIMSTYLE"))
  142.   (setq OldExpert (getvar "Expert"))
  143.   (setvar "EXPERT" 0)
  144.   (setq Path_Lang "HKEY_CURRENT_USER\\Software\\SpeedDraftLT")
  145. ;  (if (vl-registry-read Path_Lang "SD_Language" )
  146. ;       (setq SD:Lang (vl-registry-read Path_Lang "SD_Language" ))
  147. ;       (progn  (setq SD:Lang "J")
  148. ;                       (vl-registry-write Path_Lang "SD_Language" "J")
  149. ;       )
  150. ;  )
  151.   (princ)
  152. )
  153. ;********************************
  154. (defun SD2056 ()
  155.   (setvar "OSMODE" OldOsmode)
  156.   (command "undo" "end")
  157.   (setvar "CLAYER" OldLayer)
  158.   (setvar "CeLType" OldLType)
  159.   (setvar "CeLWeight" OldCeLWeight)
  160.   (setvar "CeColor" OldColor)
  161.   (setvar "ORTHOMODE" OldOrtho)
  162.   (setvar "Expert" OldExpert)
  163.   (if (and (/= (getvar "DIMSTYLE") OldDStyle)(tblsearch "DIMSTYLE" OldDStyle))
  164.         (command "-dimstyle" "Restore" OldDStyle)
  165.   )
  166.   (princ "\n (C)OffshoreCad&Management")
  167.   (setvar "CMDECHO" OldCmdEcho)
  168.   (princ)
  169. )
  170.  
  171. ;********************************
  172. (defun get_layer&ltype&color()
  173.         (setq   Lay (tblnext "LAYER" T)
  174.                         LT (tblnext "LTYPE" T)
  175.                         Laylist1 (list)
  176.                         Laylist2 (list "ByLayer" "Red" "Yellow" "Green" "Cyan" "Blue" "Magenta" "B/W")
  177.                         Laylist3 (list"ByLayer")
  178.         )
  179.         (While Lay
  180.                 (setq lay1 (list (cdr (assoc 2 Lay)))
  181.                           lay2 (cdr (assoc 62 Lay))
  182.                           lay3 (list (cdr (assoc 6 Lay)))
  183.                           Laylist1 (append Laylist1 lay1)
  184.                           Laylist3 (append Laylist3 lay3)
  185.                           Lay (tblnext "LAYER")
  186.                  )
  187.                 (if (> lay2 7)(setq  lay2 (list (itoa lay2)) Laylist2 (append Laylist2 lay2)))
  188.         )
  189.         (While LT
  190.                 (setq lay3 (list (cdr (assoc 2 LT)))
  191.                           Laylist3 (append Laylist3 lay3)
  192.                           LT (tblnext "LTYPE")
  193.                  )
  194.         )
  195.         (setq   Laylist1 (RemoveOverlap Laylist1)
  196.                         Laylist2 (RemoveOverlap Laylist2)
  197.                         Laylist3 (RemoveOverlap Laylist3))
  198. )
  199. ;************************
  200. (defun RemoveOverlap (  List2   /       List1   )
  201.         (while List2
  202.                 (setq List1 (append List1 (list (car List2))))
  203.                 (setq List2 (vl-remove (car List2) List2))
  204.         )
  205.         List1
  206. )
  207. ;;;---------Rotate----------------------------
  208.  
  209. (defun SD8446 ( PointA PointB Ang / XA YA XB YB PointC)
  210.  
  211.         (setq   XA2(- (car PointA) (car PointB))
  212.                         YA2(- (cadr PointA) (cadr PointB))
  213.         )
  214.         (setq PointC (list (- (* XA2 (cos Ang))(* YA2 (sin Ang))) (+ (* XA2 (sin Ang))(* YA2 (cos Ang)))))
  215.         (setq PointC (mapcar '+ PointC PointB))
  216.         PointC
  217. )
  218. ;****************************************************
  219. (defun SD1862 (OldPt Ang / NewCs)
  220.         (setq NewCs (SD8446 '(1 0) '(0 0) Ang))
  221.         (setq NewPt (trans OldPt 0 NewCs))
  222.         (setq NewPt (list (nth 2 NewPt)(nth 0 NewPt)))
  223.         NewPt
  224. )
  225. ;**********************
  226. (defun SD3511 (g e)
  227.         (cond
  228.                 ((= (type e) 'ename) (cdr (assoc g (entget e))))
  229.                 ((= (type e) 'list) (cdr (assoc g e)))
  230.         )
  231. )
  232. ;********************************
  233. (defun *myerror* (msg)
  234.         (setq *error* nil)
  235.         (SD2056)
  236.         (princ "\n Error in SpeedDraftLT")
  237.         (princ)
  238. )
  239.         (princ "\n Command Name: JDIMS")
  241.  
  242.  
  243.  

Thanks
Logged

DEVITG

  • Bull Frog
  • Posts: 479
Re: help with join dimension lisp
« Reply #1 on: August 08, 2020, 04:34:15 PM »
For better understanding, and to get further help,  please upload such sample.dwg
Logged
Location @ Crdoba Argentina Using ACAD 2019  at Window 10

PM

  • Guest
Re: help with join dimension lisp
« Reply #2 on: August 08, 2020, 04:39:22 PM »
here is a dwg of my te4mplate settings
Logged

PM

  • Guest
Re: help with join dimension lisp
« Reply #3 on: August 09, 2020, 03:41:49 AM »
any ideas?
Logged
Pages: [1] |   Go Up
« previous next »