Author Topic: Vertical Curve Labels along Profile  (Read 408 times)

0 Members and 1 Guest are viewing this topic.

Dave M

  • Newt
  • Posts: 174
Vertical Curve Labels along Profile
« on: March 27, 2019, 02:44:15 PM »
I would like to create a label style for crest and sag curves that would place the station/elevation at incremental points along the vertical curve.  I know it's a no-brainer using bands, but my client doesn't want to use them.


Any help would be appreciated.
Civil 3D 2018 - Microstation SS4 - Windows 7 - Dropbox

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Vertical Curve Labels along Profile
« Reply #1 on: March 27, 2019, 04:02:50 PM »
odd, it's as if they want 'staking' information along the curve....and there is a report function for that...

I think a trick might be to superimpose the design profile from one view into another profile view and have it
increment (approximate the vertical curve ) as segments with the PVI's at the required intervals, and use a label set

maybe post an example of what you're after, and I'll see if anything else comes to mind
Be your Best


Michael Farrell
http://primeservicesglobal.com/