Author Topic: prefabrication (shop drawings) in Revit MEP or Export to Acad  (Read 4290 times)

0 Members and 1 Guest are viewing this topic.

John Kaul (Se7en)

  • Administrator
  • Needs a day job
  • Posts: 9509
Re: prefabrication (shop drawings) in Revit MEP or Export to Acad
« Reply #15 on: April 19, 2016, 09:20:52 AM »
I'm sure I speak for everyone when I say that's a very nice compliment and thank you for saying so.
TheSwamp.org (serving the CAD community since 2003)

Donate to TheSwamp.org

Matt__W

  • Seagull
  • Posts: 12955
  • I like my water diluted.
Re: prefabrication (shop drawings) in Revit MEP or Export to Acad
« Reply #16 on: April 19, 2016, 09:28:59 AM »
{GROUP HUG!!}  :smitten:
Autodesk Expert Elite
Revit Subject Matter Expert (SME)
Owner/FAA sUAS Pilot @ http://skyviz.io

John Kaul (Se7en)

  • Administrator
  • Needs a day job
  • Posts: 9509
Re: prefabrication (shop drawings) in Revit MEP or Export to Acad
« Reply #17 on: April 19, 2016, 09:31:34 AM »
You just want an opportunity to see my butt, M@yhem.
TheSwamp.org (serving the CAD community since 2003)

Donate to TheSwamp.org

Matt__W

  • Seagull
  • Posts: 12955
  • I like my water diluted.
Re: prefabrication (shop drawings) in Revit MEP or Export to Acad
« Reply #18 on: April 19, 2016, 02:45:04 PM »
You just want an opportunity to see my butt, M@yhem.
WHOA! That escalated quickly. Keep your clothes on, dude!!
Autodesk Expert Elite
Revit Subject Matter Expert (SME)
Owner/FAA sUAS Pilot @ http://skyviz.io

John Kaul (Se7en)

  • Administrator
  • Needs a day job
  • Posts: 9509
Re: prefabrication (shop drawings) in Revit MEP or Export to Acad
« Reply #19 on: April 19, 2016, 04:15:38 PM »
lmao
TheSwamp.org (serving the CAD community since 2003)

Donate to TheSwamp.org

Amsterdammed

  • Swamp Rat
  • Posts: 507
  • Revit MEP 2016 Acad2013, OPEN DCL
Re: prefabrication (shop drawings) in Revit MEP or Export to Acad
« Reply #20 on: May 09, 2016, 06:21:19 AM »
i just came along Fabrication CADmep.

http://www.autodesk.com/products/fabrication-products/features/fabrication-cadmep/all/gallery-view


that seems to be exactly the idea i try to follow, export to cad as good as possible and spool over there.

looks like that is adesk' s own idea to enhance ifc? or do i see that wrong? Has anybody experience with Fabrication CADmep?

Bernd
Bernd