Author Topic: Mechanical Equipment Family - View Range?  (Read 9882 times)

0 Members and 1 Guest are viewing this topic.

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Mechanical Equipment Family - View Range?
« Reply #30 on: November 30, 2015, 02:18:31 PM »
Quote from: mjfarrell link
I too, find him increasingly funny.

I'd much rather you didn't even respond in any fashion to my questions. I don't want your kind of help.
even when its right....

amazing that an adult could be so petty

[redacted by 7]
« Last Edit: November 30, 2015, 02:27:03 PM by John Kaul (Se7en) »
Be your Best


Michael Farrell
http://primeservicesglobal.com/

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Mechanical Equipment Family - View Range?
« Reply #31 on: November 30, 2015, 02:20:17 PM »
Don't put words into my mouth. You caused more aggravation with your stabs in the dark than relief of finding a solution. I gave you credit as due and you may see me as a leech, but do not quote me with stuff I didn't say.
stabs in the dark due to not having a sample drawing to work from...

I believe you have even castigated others for not posting a sample drawing as well.
Be your Best


Michael Farrell
http://primeservicesglobal.com/

Rob...

  • King Gator
  • Posts: 3822
  • Take a little time to stop and smell the roses.
Re: Mechanical Equipment Family - View Range?
« Reply #32 on: November 30, 2015, 02:21:24 PM »
[redacted by 7]

I believe that is a flagrant violation of forum rules.
« Last Edit: November 30, 2015, 02:27:24 PM by John Kaul (Se7en) »
CAD Tech

John Kaul (Se7en)

  • Administrator
  • Needs a day job
  • Posts: 9519
Re: Mechanical Equipment Family - View Range?
« Reply #33 on: November 30, 2015, 02:25:14 PM »
Ok, sorry guys. But I may have to start editing a few of those posts. Normally I'd save the orig text and go check the forum rules and all that stuff but I'm gonna go out on a limb and just not save (I'm just going to edit to best of my judgment and damn the repercussions from you guys). ...We can talk via PM and/or phone if you want.
TheSwamp.org (serving the CAD community since 2003)

Donate to TheSwamp.org

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Mechanical Equipment Family - View Range?
« Reply #34 on: November 30, 2015, 02:26:42 PM »
[redacted by 7]

I believe that is a flagrant violation of forum rules.

Look, the fact that you attacked me  and filled a personal message with profanity and hateful speech, is also most likely a violation of the forum rules as well.

I've moved past that and still atempt to treat you with respect and afford you help whenever and however I can.

Shame that you can't seem to move past your attitude as well.
« Last Edit: November 30, 2015, 02:28:35 PM by John Kaul (Se7en) »
Be your Best


Michael Farrell
http://primeservicesglobal.com/

Rob...

  • King Gator
  • Posts: 3822
  • Take a little time to stop and smell the roses.
Re: Mechanical Equipment Family - View Range?
« Reply #35 on: November 30, 2015, 02:27:02 PM »
BTW, it is not a grudge. I truly dislike most of what you say here.
CAD Tech

Rob...

  • King Gator
  • Posts: 3822
  • Take a little time to stop and smell the roses.
Re: Mechanical Equipment Family - View Range?
« Reply #36 on: November 30, 2015, 02:29:02 PM »
Look, the fact that you attacked me  and filled a personal message with profanity and hateful speech, is also most likely a violation of the forum rules as well.

I did that a long time ago because you pissed me off so much that I would not respond in the forum out of respect for the rules.
CAD Tech

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Mechanical Equipment Family - View Range?
« Reply #37 on: November 30, 2015, 02:35:26 PM »
Look, the fact that you attacked me  and filled a personal message with profanity and hateful speech, is also most likely a violation of the forum rules as well.

I did that a long time ago because you pissed me off so much that I would not respond in the forum out of respect for the rules.

At yet you still hold on to crappy attitude towards me...
If you really respected the rules you would have left the profanity out of your message as well.

At you still take every opportunity to try to slam me...

Let it go, and both our expeince here will be greatly improved, or do you enjoy making being such an Equus hemionus khur?
Be your Best


Michael Farrell
http://primeservicesglobal.com/

John Kaul (Se7en)

  • Administrator
  • Needs a day job
  • Posts: 9519
Re: Mechanical Equipment Family - View Range?
« Reply #38 on: November 30, 2015, 02:37:42 PM »
Editing done. You guys can keep boxing away but just try to keep the convo clean(ER) guys. Sorry, again, for editing some of your posts (I really don't like doing that).
TheSwamp.org (serving the CAD community since 2003)

Donate to TheSwamp.org

John Kaul (Se7en)

  • Administrator
  • Needs a day job
  • Posts: 9519
Re: Mechanical Equipment Family - View Range?
« Reply #39 on: November 30, 2015, 02:45:00 PM »
...Equus hemionus khur
*click-click*
Quote
...can easily outrun a jeep
wow! That's kind of impressive.
TheSwamp.org (serving the CAD community since 2003)

Donate to TheSwamp.org

Rob...

  • King Gator
  • Posts: 3822
  • Take a little time to stop and smell the roses.
Re: Mechanical Equipment Family - View Range?
« Reply #40 on: November 30, 2015, 02:47:35 PM »
Why is he allowed to continue insulting me and with the support of a moderator?
CAD Tech

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Mechanical Equipment Family - View Range?
« Reply #41 on: November 30, 2015, 02:48:07 PM »
Editing done. You guys can keep boxing away but just try to keep the convo clean(ER) guys. Sorry, again, for editing some of your posts (I really don't like doing that).
I would rather there be some mechanism too edit his craptastic attitude .... start deleting that and everyone will be much happier.
Be your Best


Michael Farrell
http://primeservicesglobal.com/

mjfarrell

  • Seagull
  • Posts: 14444
  • Every Student their own Lesson
Re: Mechanical Equipment Family - View Range?
« Reply #42 on: November 30, 2015, 02:49:20 PM »
Why is he allowed to continue insulting me and with the support of a moderator?
you seam to think that is your mission every day

really, I thought by now you might lose your crappy attitude and move on
Be your Best


Michael Farrell
http://primeservicesglobal.com/

Rob...

  • King Gator
  • Posts: 3822
  • Take a little time to stop and smell the roses.
Re: Mechanical Equipment Family - View Range?
« Reply #43 on: November 30, 2015, 02:50:08 PM »
I'd rather have my attitude than spew the negativity that you do everywhere.
CAD Tech

Krushert

  • Seagull
  • Posts: 13616
  • FREE BEER Tomorrow!!
Re: Mechanical Equipment Family - View Range?
« Reply #44 on: November 30, 2015, 02:50:42 PM »
Take a breather guys.   Just take a breather for  10 minutes.
I + XI = X is true ...  ... if you change your perspective.

I no longer CAD or Model, I just hang out here for camaraderie