Author Topic: ...  (Read 3799 times)

0 Members and 1 Guest are viewing this topic.

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
...
« on: February 04, 2014, 12:11:11 PM »
.
« Last Edit: February 26, 2014, 02:08:07 AM by alanjt »
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox

Willie

  • Swamp Rat
  • Posts: 958
  • Going nowhere slowly
Re: Civil 3D pipe centerline not trimming at structure boundary
« Reply #1 on: February 04, 2014, 02:02:49 PM »
Are those pipes connected to the structure?
Soli Deo Gloria | Qui Audet Adipiscitur
Windows 8  64-bit Enterprise | Civil 3D 2015 and 2016| ArcGIS 10.1
Yogi Berra : "I'd give my right arm to be ambidextrous."

Matt__W

  • Seagull
  • Posts: 12955
  • I like my water diluted.
Re: Civil 3D pipe centerline not trimming at structure boundary
« Reply #2 on: February 04, 2014, 02:10:38 PM »
Are those pipes connected to the structure?
Is it weird that I just started singing, ♫♫"The pipe is connected to the... structure.  The structures connected to the... topo." ♫♫    :lol:
Autodesk Expert Elite
Revit Subject Matter Expert (SME)
Owner/FAA sUAS Pilot @ http://skyviz.io

Bethrine

  • Guest
Re: Civil 3D pipe centerline not trimming at structure boundary
« Reply #3 on: February 04, 2014, 02:36:18 PM »
I use a boundary/polyline line to contain hatch. I would edit it to fit...?

Bethrine

  • Guest
Re: Civil 3D pipe centerline not trimming at structure boundary
« Reply #4 on: February 04, 2014, 02:41:24 PM »
I use a boundary/polyline line to contain hatch. I would edit it to fit...?
Unless I'm just missing the mark, that would only work if one were using plines, hatch, and blocks, correct? These are civil 3d "smart" objects.

 :-o ...oops...:ugly:

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
Re: Civil 3D pipe centerline not trimming at structure boundary
« Reply #5 on: February 04, 2014, 02:42:52 PM »
I use a boundary/polyline line to contain hatch. I would edit it to fit...?
Unless I'm just missing the mark, that would only work if one were using plines, hatch, and blocks, correct? These are civil 3d "smart" objects.

 :-o ...oops...:ugly:
lol
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox

BlackBox

  • King Gator
  • Posts: 3770
Re: Civil 3D pipe centerline not trimming at structure boundary
« Reply #6 on: February 04, 2014, 04:55:38 PM »
I forget which, the pipe, or structure style, has a setting to not display the pipe beyond the structure boundary, no?  :?
"How we think determines what we do, and what we do determines what we get."

alanjt

  • Needs a day job
  • Posts: 5352
  • Standby for witty remark...
Re: Civil 3D pipe centerline not trimming at structure boundary
« Reply #7 on: February 04, 2014, 05:13:28 PM »
I forget which, the pipe, or structure style, has a setting to not display the pipe beyond the structure boundary, no?  :?
The structure, if memory serves - been a while since I've had to mess with that. Strange thing is, you can see where it's trimming my pipe walls, just not the centerline.
Civil 3D 2019 ~ Windohz 7 64bit
Dropbox