I use blocks that have circles to count our parking stalls. Then use the following routine:
;; modified by Dan
;;COUNT.LSP Copyright 1991 Tony Tanzillo All Rights Reserved.
;;-----------------------------------------------------------------
;; Author: Tony Tanzillo,
;; Design Automation Consulting
;;
;; Permission to use, copy, modify, and distribute this software
;; for any purpose and without fee is hereby granted, provided
;; that the above copyright notice appears in all copies and
;; that both that copyright notice and the limited warranty and
;; restricted rights notice below appear in all copies and all
;; supporting documentation, and that there is no charge or fee
;; charged in return for distribution or duplication.
;;
;; This SOFTWARE and documentation are provided with RESTRICTED
;; RIGHTS.
;;
;; Use, duplication, or disclosure by the Government is subject
;; to restrictions as set forth in subparagraph (c)(1)(ii) of
;; the Rights in Technical Data and Computer Software clause at
;; DFARS 252.227-7013 or subparagraphs (c)(1) and (2) of the
;; Commercial Computer Software Restricted Rights at 48 CFR
;; 52.227-19, as applicable. The manufacturer of this SOFTWARE
;; is Tony Tanzillo, Design Automation Consulting.
;;
;; NO WARRANTY
;;
;; ANY USE OF THIS SOFTWARE IS AT YOUR OWN RISK. THE SOFTWARE
;; IS PROVIDED FOR USE "AS IS" AND WITHOUT WARRANTY OF ANY KIND.
;; TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE AUTHOR
;; DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT
;; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND
;; FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE SOFTWARE.
;;
;; NO LIABILITY FOR CONSEQUENTIAL DAMAGES. TO THE MAXIMUM
;; EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
;; THE AUTHOR OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL,
;; INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER
;; (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
;; BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
;; INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF
;; THE USE OF OR INABILITY TO USE THE SOFTWARE PRODUCT, EVEN
;; IF THE AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
;; DAMAGES. BECAUSE SOME JURISDICTIONS DO NOT ALLOW EXCLUSION
;; OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL
;; DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
; Adds the COUNT command to AutoCAD, which counts, itemizes, and displays
; in tabular form, the number of insertions of each block in the selected
; objects, or the entire drawing.
;
; Add to ACAD.LSP, or load with (load"count")
;
; First implemented in May of 1990.
;
; Revision history:
;
; 07/25/2002: Added wildcard block name selection filtering
;
; 10/13/1991: General revisions for R11:
;
; 1. Now ignores anonymous blocks and Xrefs.
;
; 2. Added console/screen paging, pauses listing
; at each screen-full and waits for a keypress.
;
; Notes on console paging:
;
; 1. To disable console paging, add the following to COUNT.LSP:
;
; (setq *cpage-disable* t)
;
; 2. The number of physical console lines defaults to 25. This
; can be overridden by adding the following to COUNT.LSP
;
; (setq *console-lines* <num> )
;
; Where <num> is the integer number of physical screen lines.
;
; 3. The screen-clear function defaults to (textpage) under R11,
; and (textscr) under R10 (no screen-clearing is performed),
; but it can be redefined by assigning a function that is to
; be called to do a screen-clear to the symbol *clear-screen*.
;
; The following example can be used with R10 if ANSI.SYS or
; any compatible console-driver is installed, to clear the
; display on each screen-page:
;
; (defun *clear-screen* ()
; (textscr)
; (princ "\e[2J")
; nil
; )
;
; Program listing:
(defun C:COUNT ( / blocks ss pat default)
(setq blocksTotal 0)
(if SDG_getstring
(progn
(if SDG_COUNT_DEFAULT$ (setq default SDG_COUNT_DEFAULT$)(setq default "*"))
(setq pat (SDG_getstring nil "\nBlock name specification" default))
(if pat (setq SDG_COUNT_DEFAULT$ pat))
)
(setq pat (getstring t "\nBlock name specification <*>: "))
) ;_if
(if (eq pat "") (setq pat "*"))
(princ "\nPress <CR> to select entire drawing or,")
(cond
( (not (setq ss (cond ((ssget (list '(0 . "INSERT") (cons 2 pat))))
(t (ssget "x" (list '(0 . "INSERT") (cons 2 pat)))))))
(princ "\nNo matching block insertions found."))
(t (princ "\nCounting block insertions...\n")
( (lambda (i)
(repeat i (count_block (ssname ss (setq i (1- i))))))
(sslength ss))
(cond
( (not blocks)
(princ "\nNo block insertions found."))
(t (table-print blocks "Block" "Count" "-" 8 "." nil 'itoa)
(princ (strcat "Total " (itoa (sslength ss))))
)
)))
(princ)
)
(defun table-print (alist title1 title2 headsub coltab padchr
car-form cdr-form / maxlen maxline padstr )
(setq car-form (cond (car-form) (t '(lambda (x) x)))
cdr-form (cond (cdr-form) (t '(lambda (x) x))))
(setq maxlen
(mapcar
'(lambda (pair)
(cons (strlen (car pair))
(strlen (cdr pair))))
(setq alist
(mapcar
'(lambda (pair)
(cons (apply car-form (list (car pair)))
(apply cdr-form (list (cdr pair)))))
alist ))))
(setq maxlen (+ -2 (apply 'max (mapcar 'car maxlen))
(apply 'max (mapcar 'cdr maxlen)))
maxline (+ maxlen coltab)
padstr (repl padchr 70))
(cprinc-init)
(cprinc (strcat title1 " "
(ctab (cons title1 title2)
maxline
(repl " " 70))
" " title2))
(cprinc (repl headsub (+ maxline 2)))
(mapcar
'(lambda (pair)
(cprinc (strcat (car pair) " "
(ctab pair maxline padstr) " "
(cdr pair))))
alist )
)
(defun repl (chr len / res)
(apply 'strcat (repeat len (setq res (cons chr res))))
)
(defun ctab (pair max padstr)
(substr padstr 1 (- max (strlen (car pair) (cdr pair))))
)
(defun cdr++ (key alist)
( (lambda (x)
(cond (x (subst (cons (car x) (1+ (cdr x))) x alist))
(t (cons (cons key 1) alist))))
(assoc key alist))
)
(defun get (k l) (cdr (assoc k l)))
(defun entgetf (k e)
( (lambda (l)
(mapcar '(lambda (x) (cdr (assoc x l))) k))
(entget e))
)
(defun count_block (ename)
(apply
'(lambda (etype name)
(cond
( (and (eq "INSERT" etype)
(or (assoc name blocks)
(zerop (logand 45 (get 70 (tblsearch "block" name)))))
(setq blocks (cdr++ name blocks))
))) nil)
(entgetf '(0 2) ename))
)
(defun cprinc-init ()
(setq *console-lines* (cond (*console-lines*) (t 25))
*cprinc-msg* (cond (*cprinc-msg*) (t "--- Press any key ---"))
*cprinc-rubout*
(cond ( (or textpage *clear-screen*) "")
(t (strcat "\r" (repl " " (strlen *cprinc-msg*)) "\r")))
*cprinc-line* -1)
(cond (textpage (textpage))
(*clear-screen* (*clear-screen*))
(t (textscr) (terpri)))
)
(defun cprinc-page ()
(princ *cprinc-msg*)
(grread)
(cond (textpage (textpage))
(*clear-screen* (*clear-screen*))
(t (textscr)))
(princ *cprinc-rubout*)
(setq *cprinc-line* 0)
)
(defun cprinc (s)
(cond ( *cpage-disable*)
( (not *cprinc-line*)
(cprinc-init))
( (eq (setq *cprinc-line* (1+ *cprinc-line*))
(1- *console-lines*))
(cprinc-page)))
(write-line s)
)
; ############################ eof COUNT.LSP ################################
(princ "\nC:COUNT loaded. Start command with COUNT. ")
(princ)
;;;==========================================================
;;; Get String with default - from Looking Glass Microproducts
;;;(XYZ_getstring acceptSpaces? promptString default)
;;;==========================================================
(defun XYZ_getstring (cr prmpt default / temp)
(cond
((= ""
(Setq
temp (GetString
cr
(If (/= "" default)
(Strcat prmpt " <" default ">: ")
(Strcat prmpt ": ")
)
)
)
)
default
)
((= "." temp) "")
(T temp)
)
)