TheSwamp

CAD Forums => CAD General => Topic started by: jlogan02 on June 05, 2020, 01:32:14 PM

Title: DWF multi-sheet using publish/bad results
Post by: jlogan02 on June 05, 2020, 01:32:14 PM

The 2 attached images are are from the same dwf file.

My process...

• Publish multi-sheet file in AutoCAD publish
• Choose a page setup
• Whack the publish button
• DWF complete, open the File in Design Review
• All files show properly in the Thumbnails
• Drawing view is right
• Select second Thumbnail and all others.
• The view is not full page
• I need to enter "F" or the select the "Fit to Window" button

All drawing files' settings are exactly the same. At least as far as I've researched to this point. I can't seem to get all files in a dwf or dwfx file to have the view set to full upon initial open.

If I set all the views to full and save the dwf or dwfx, the next time I open the file I'm right back to where I started having to set the views of all to full.

If I plot dwf or dwfx files of each drawing as individual dwf/dwfx files. Open each file separately and all is right with each view.

My apologies, I can't provide images for review due to proprietary info.
 
What am I missing?

J. Logan
AutoCAD 2018

Title: Re: DWF multi-sheet using publish/bad results
Post by: tombu on June 16, 2020, 01:46:27 PM

Could you and an image of the "CHQ4NWL…" Page Setup settings?
Not much to go on without it.