TheSwamp
CAD Forums => CAD General => Topic started by: Andrea on January 13, 2020, 10:58:22 AM
-
Hi all,..I've an alert when opening brand new installation C3D 2018 vanilla saying that c:ai_molc command is a protected symbol.
after some research,...I'Ve found this code in the C3D.mnl file..
anyone already had this issue ?
thank you.
-
ok nevermind..
https://knowledge.autodesk.com/support/civil-3d/troubleshooting/caas/sfdcarticles/sfdcarticles/Assignment-to-Protected-Symbol-c-ai-molc-Enter-Break-Loop-Keeps-Popping-Up-In-Civil-3D.html
thanks :)
-
Or you could just turn off that level of debugging in the VLIDE.
:idiot2:
VLIDE > Tools > Environment Variables > General Options
At the bottom, you'll see "SETQ to protected symbols" - Set that to "Transparent" or "Print Message" to avoid the dialog box.
(https://i.imgur.com/Wwu1aqW.png)
-
Thanks,....for info,...VLIDE will no longuer exist in 2021
-
feel free to illuminate
-
it will be replaced by VS Code.
-
it will be replaced by VS Code.
I don't know what your source is but if it were true, it would be covered by NDA.
-
it will be replaced by VS Code.
Source? Link?
I don't know what your source is but if it were true, it would be covered by NDA.
Indeed.
-
I don't know what your source is but if it were true, it would be covered by NDA.
Correct.
Those who know, can't tell.
Those who tell, don't know.
-
Those under NDA who tell: pp slappage
O.o