TheSwamp

CAD Forums => Vertically Challenged => Land Lubber / Geographically Positioned => Topic started by: Dave M on March 27, 2019, 02:44:15 PM

Title: Vertical Curve Labels along Profile
Post by: Dave M on March 27, 2019, 02:44:15 PM

I would like to create a label style for crest and sag curves that would place the station/elevation at incremental points along the vertical curve.  I know it's a no-brainer using bands, but my client doesn't want to use them.


Any help would be appreciated.

Title: Re: Vertical Curve Labels along Profile
Post by: mjfarrell on March 27, 2019, 04:02:50 PM

odd, it's as if they want 'staking' information along the curve....and there is a report function for that...

I think a trick might be to superimpose the design profile from one view into another profile view and have it
increment (approximate the vertical curve ) as segments with the PVI's at the required intervals, and use a label set

maybe post an example of what you're after, and I'll see if anything else comes to mind