TheSwamp
CAD Forums => CAD General => Dynamic Blocks => Topic started by: Coder on January 20, 2016, 02:30:48 PM
-
Hello guys.
How can I make the hatch stretching with Stretch Action ? it seems to me that it is somehow not possible !!
If it is not possible, is there any work around this problem?
Thank you.
-
Hello guys.
How can I make the hatch stretching with Stretch Action ? it seems to me that it is somehow not possible !!
If it is not possible, is there any work around this problem?
Thank you.
are your hatches associative?
and
are you stretching the hatch boundary along with the other lines that define that hatched area?
and remember STRETCH command really ONLY works with a crossing window
-
Hi,
Yes the hatch is associated, and I am referring to Stretch Action in Dynamic Blocks and not to Stretch Command.
Thank you.
-
Have you simply tried to stretch the hatch boundary? The hatch should follow suit.
-
check PICKSTYLE variable, should be either 2 or 3 to have boundary update hatch
-
In general, in dynamic blocks with hatch, make your hatch boundry a closed polyline, even if you have to put it on defpoints to hide it, then don't select the hatch when you select the stretch objects (more specifically, don't select the center node of the hatch), else it wont stretch, it will just move.
BUT.. if you use a flip or a rotate action, you do select the hatch.
Of course, make sure your hatch is associative and you will have much better results if you select the polyline instead of selecting the area.
-
Great , thank you so much to all of you.
It works now.