TheSwamp
CAD Forums => CAD General => Topic started by: EoinC on August 27, 2015, 10:05:48 AM
-
Having used data extraction in Autocad 2012, I could list a table of blocks along with the X and Y coordinate of each block.
I am trying to do the same thing in the 2015 version and I cannot separate the X and Y coordinates into different Columns. I used to select "Position X" and "Position Y". Now I can only select "Position" and the column produces "xcoord,ycoord,zcoord".
Has anyone else had this issue and is there a way to split them up?
Thanks
-
First off, Welcome to TheSwamp!
Second I am still running 2014 so I can not test it. If this is as you say then that would be lousy thing to do to us
Keep us informed on what you find out. I like the data extraction command
-
I'm not sure about 2015, but ACAD2016 seems to have fixed or works as expected
(http://i59.tinypic.com/w98r9t.png)
-
Works fine for me.
-
Thank you for the replies.
Here is a screenshot of what I am looking at. It seems to be an internal setting within my ACAD but I don't know where I can change this.
I'll let ye know if I find a fix, but thanks anyway for yer help.
-
Are you selecting only blocks?
-
Yes. Should I be selecting more?
-
Weird. You could export to a comma-delimited (csv) file then parse it with excel.
-
It is strange because I used it a few weeks ago with 2012. It must be a setting on my ACAD somewhere.
I have used the method of exporting to excel but I was hoping someone would have experienced the same issue and solved it within CAD.
Thank you for your time and suggestions. It's just frustrating because I know it can be done.
-
It sure looks like you've selected a viewport. Perhaps try it by selecting only a single block and see if it works?
-
There is a viewport included in the screenshots I put up, however they were taken as part of a quick example I did. I have the same issue with just blocks, even when I select the block by highlighting it.
-
What is COORDS setting?
-
The COORDS variable was set to 1. I have changed it to 0, 2, 3 but got the same result. I am working in the WCS. Does this answer your question? Thank you again for your help.
It seems like changing a setting like this would solve my problem.