TheSwamp
CAD Forums => CAD General => Topic started by: ML on November 05, 2004, 09:02:11 AM
-
Hello,
For some reason I am not able to shift + right mouse button to access my Osnaps anymore. I tried reloading The ACAD menu but that didn't help either. That leads me to believe that there is a variable that controls that but I can not find it. Does anyone know why this may be happening and what the solution is?
Thank you
Mark
-
Open the ACAD.MNS. Right around line 32 is the AUX2 section. It should read:
***AUX2
$P0=SNAP $p0=*
$P0=SNAP $p0=*
Right around line 42 is the ***POP0 section. it should read:
***POP0
**SNAP
[&Object Snap Cursor Menu]
ID_Tracking [Temporary trac&k point]_tt
ID_From [&From]_from
ID_MidTwoPts [Mid Bet&ween 2 Points]_m2p
ID_MnPointFi [->Poin&t Filters]
ID_PointFilx [.X].X
ID_PointFily [.Y].Y
ID_PointFilz [.Z].Z
[--]
ID_PointFixy [.XY].XY
ID_PointFixz [.XZ].XZ
ID_PointFiyz [<-.YZ].YZ
[--]
ID_OsnapEndp [&Endpoint]_endp
ID_OsnapMidp [&Midpoint]_mid
ID_OsnapInte [&Intersection]_int
ID_OsnapAppa [&Apparent Intersect]_appint
ID_OsnapExte [E&xtension]_ext
[--]
ID_OsnapCent [&Center]_cen
ID_OsnapQuad [&Quadrant]_qua
ID_OsnapTang [Tan&gent]_tan
[--]
ID_OsnapPerp [&Perpendicular]_per
ID_OsnapPara [Para&llel]_par
ID_OsnapNode [No&de]_nod
ID_OsnapInse [In&sert]_ins
ID_OsnapNear [Nea&rest]_nea
ID_OsnapNone [&None]_non
[--]
ID_Osnap [&Osnap Settings...]'_+dsettings 2
Check that out...
-
Have you checked to make sure something didn't get switched in your preferences?? Check tool, options, user preferences and then click on right-click customization, make sure short cut menu is selected for all three modes.
Sometimes strange things get reset when using lisp routines and other programs.
-
Have you checked to make sure something didn't get switched in your preferences?? Check tool, options, user preferences and then click on right-click customization, make sure short cut menu is selected for all three modes.
Sometimes strange things get reset when using lisp routines and other programs.
Even if shortcut menus are turned off, you still have the function of shift+right click (AUX2).
-
Hey Dommy,
Thanks for the answer but I do have the code there (see below) and it is still not working????
Hey PD, I did check all of the Options
Anymore ideas?
Thanks
Mark
***AUX2
$P0=SNAP $p0=*
$P0=SNAP $p0=*
***AUX3
$P0=SNAP $p0=*
***AUX4
$P0=SNAP $p0=*
***POP0
**SNAP
[&Object Snap Cursor Menu]
ID_Tracking [Temporary trac&k point]_tt
ID_From [&From]_from
ID_MnPointFi [->Poin&t Filters]
ID_PointFilx [.X].X
ID_PointFily [.Y].Y
ID_PointFilz [.Z].Z
[--]
ID_PointFixy [.XY].XY
ID_PointFixz [.XZ].XZ
ID_PointFiyz [<-.YZ].YZ
[--]
ID_OsnapEndp [&Endpoint]_endp
ID_OsnapMidp [&Midpoint]_mid
ID_OsnapInte [&Intersection]_int
ID_OsnapAppa [&Apparent Intersect]_appint
ID_OsnapExte [E&xtension]_ext
[--]
ID_OsnapCent [&Center]_cen
ID_OsnapQuad [&Quadrant]_qua
ID_OsnapTang [Tan&gent]_tan
[--]
ID_OsnapPerp [&Perpendicular]_per
ID_OsnapPara [Para&llel]_par
ID_OsnapNode [No&de]_nod
ID_OsnapInse [In&sert]_ins
ID_OsnapNear [Nea&rest]_nea
ID_OsnapNone [&None]_non
[--]
ID_Osnap [&Osnap Settings...]'_+dsettings 2
-
I think that I switched a system variable but don't recall which one, it is driving me nuts
-
OK, I don't know why I didn't think of this earlier but I had previously saved out my profile. I simply reloaded it and all is well now.
Evidentally profiles save system variable settings as well
I highly recommend every one saving out profiles
Thanks again
Mark
-
mbuttonpan
Controls the shift+scroll wheel behavior.
-
Sorry, I ment controls the scroll wheel (not the shift+scroll wheel).
-
You might want to play with the "osnapcoord" settings to see if that has something to do with it.
What is it doing when you shift+right click?
-
Well, right now it is working perfect because I re imported my profile that I had previously saved out but I don't know what what cause that to happen except for a system variable that I may have screwed with and forgot to switch back
Mark
-
Sometimes bad lisp writers change system variables without realizing it. Did you resently start using a new lisp?
-
SHORTCUTMENU VARIABLE?
Bobber
-
Nope that doesn't do it but it is OK
I say my profile out like once every few weeks. May be I should do it weekly as much as I screw around.
I do have a test profile for that very purpose also