TheSwamp
Code Red => AutoLISP (Vanilla / Visual) => Topic started by: taner on October 19, 2007, 08:59:03 PM
-
Anyone have the whole ACET help file including below functionc?
ACET-ACAD-REFRESH
ACET-ACADREACTOR-ID-ADD
ACET-ACADREACTOR-ID-REMOVE
ACET-ACADREACTOR-ID-REMOVE-ALL
ACET-ACADREACTOR-ID-SWAP
ACET-ACADREACTOR-IDS-GET
ACET-ADDGBINEXPRESS
ACET-ALERT
ACET-ALT-VIEWPORT
ACET-ANGLE-EQUAL
ACET-ANGLE-FORMAT
ACET-APPID-DELETE
ACET-ARX-RE-LOAD
ACET-ARXLOAD-OR-BUST
ACET-AUTOLOAD
ACET-AUTOLOAD-APPLY
ACET-AUTOLOAD-EXEC
ACET-AUTOLOAD2
ACET-BLINK-AND-SHOW-OBJECT
ACET-BLOCK-MAKE-ANON
ACET-BLOCK-PURGE
ACET-BS-STRIP
ACET-CALC-BITLIST
ACET-CALC-ROUND
ACET-CALC-TAN
ACET-CMD-CHECK
ACET-CMD-EXIT
ACET-CURRENTVIEWPORT-ENAME
ACET-DCL-LIST-MAKE
ACET-DICT-ENAME
ACET-DICT-FILTER-MATCH
ACET-DICT-MAKE
ACET-DICT-NAME-LIST
ACET-DISABLED-COMMAND
ACET-DTOR
ACET-DXF
ACET-EDITOR-REACTOR-ADD
ACET-ELIST-ADD-DEFAULTS
ACET-ELIST-FILTER--4-MATCH
ACET-ELIST-FILTER-AND-MATCH
ACET-ELIST-FILTER-GC-MATCH
ACET-ELIST-FILTER-MATCH
ACET-ELIST-FILTER-NOT-MATCH
ACET-ELIST-FILTER-OR-MATCH
ACET-ENT-CURVEPOINTS
ACET-ENT-GEOMEXTENTS
ACET-ERROR
ACET-ERROR-INIT
ACET-ERROR-RESTORE
ACET-EXPLODE
ACET-FILE-ATTR
ACET-FILE-BACKUP
ACET-FILE-BACKUP-DELETE
ACET-FILE-BACKUP-RESTORE
ACET-FILE-CHDIR
ACET-FILE-COPY
ACET-FILE-CWD
ACET-FILE-DIR
ACET-FILE-FIND
ACET-FILE-FIND-FONT
ACET-FILE-FIND-IMAGE
ACET-FILE-FIND-ON-PATH
ACET-FILE-MKDIR
ACET-FILE-MOVE
ACET-FILE-OPEN
ACET-FILE-READDIALOG
ACET-FILE-REMOVE
ACET-FILE-RMDIR
ACET-FILE-SYSTIME-COMPARE
ACET-FILE-WRITEDIALOG
ACET-FILENAME-ACAD-ROOT
ACET-FILENAME-ASSOCIATED-APP
ACET-FILENAME-DIR-ON-PATH
ACET-FILENAME-DIRECTORY
ACET-FILENAME-EXT-REMOVE
ACET-FILENAME-EXTENSION
ACET-FILENAME-PATH-REMOVE
ACET-FILENAME-SUPPORTPATH-REMOVE
ACET-FILENAME-VALID
ACET-FULL-DWGNAME
ACET-GENERAL-PROPS-GET
ACET-GENERAL-PROPS-GET-PAIRS
ACET-GENERAL-PROPS-SET
ACET-GENERAL-PROPS-SET-PAIRS
ACET-GEOM-ANGLE-TO-ELLIPSEANGLE
ACET-GEOM-ANGLE-TRANS
ACET-GEOM-ARBITRARY-X
ACET-GEOM-ARC-3P-D-ANGLE
ACET-GEOM-ARC-BULGE
ACET-GEOM-ARC-CENTER
ACET-GEOM-ARC-D-ANGLE
ACET-GEOM-ARC-DELTA-ANGLE
ACET-GEOM-ARC-POINT-LIST
ACET-GEOM-CALC-ARC-ERROR
ACET-GEOM-CROSS-PRODUCT
ACET-GEOM-DELTA-VECTOR
ACET-GEOM-ELLIPSE-ARC-LIST
ACET-GEOM-ELLIPSE-POINT-AT-ANGLE
ACET-GEOM-ELLIPSE-POINT-AT-E-ANGLE
ACET-GEOM-ELLIPSE-POINT-LIST
ACET-GEOM-ELLIPSE-TO-PLINE
ACET-GEOM-ELLIPSEANGLE-TO-ANGLE
ACET-GEOM-EXTENTS
ACET-GEOM-IMAGE-BOUNDS
ACET-GEOM-IMAGE-CLIP-LIST
ACET-GEOM-INSERT-CLIP-LIST
ACET-GEOM-INSERT-POINT-LIST
ACET-GEOM-INTERSECTWITH
ACET-GEOM-IS-ARC
ACET-GEOM-LIST-EXTENTS
ACET-GEOM-LIST-FUZ
ACET-GEOM-M-TRANS
ACET-GEOM-MATRIX-TRANS
ACET-GEOM-MIDPOINT
ACET-GEOM-MTXTBOX
ACET-GEOM-OBJECT-END-POINTS
ACET-GEOM-OBJECT-FUZ
ACET-GEOM-OBJECT-NORMAL-VECTOR
ACET-GEOM-OBJECT-POINT-LIST
ACET-GEOM-OBJECT-Z-AXIS
ACET-GEOM-PIXEL-UNIT
ACET-GEOM-PLINE-ARC-INFO
ACET-GEOM-PLINE-POINT-LIST
ACET-GEOM-POINT-FUZ
ACET-GEOM-POINT-INSIDE
ACET-GEOM-POINT-ROTATE
ACET-GEOM-POINT-SCALE
ACET-GEOM-RECT-POINTS
ACET-GEOM-SELF-INTERSECT
ACET-GEOM-SPLINE-POINT-LIST
ACET-GEOM-SS-EXTENTS
ACET-GEOM-SS-EXTENTS-ACCURATE
ACET-GEOM-SS-EXTENTS-FAST
ACET-GEOM-TEXTBOX
ACET-GEOM-TRANS-IMAGE-TO-UCS
ACET-GEOM-TRANS-UCS-TO-IMAGE
ACET-GEOM-TXTBOX
ACET-GEOM-UNIT-VECTOR
ACET-GEOM-VECTOR-ADD
ACET-GEOM-VECTOR-D-ANGLE
ACET-GEOM-VECTOR-PARALLEL
ACET-GEOM-VECTOR-SCALE
ACET-GEOM-VECTOR-SIDE
ACET-GEOM-VERTEX-LIST
ACET-GEOM-VIEW-POINTS
ACET-GEOM-Z-AXIS
ACET-GEOM-ZOOM-FOR-SELECT
ACET-GETVAR
ACET-GETVAR-CPROFILE
ACET-GETVAR-DWG
ACET-GETVAR-FIXED-PROFILE
ACET-GO-TO-EXPRESS-PAGE
ACET-GROUP-MAKE-ANON
ACET-HATCH-LOOP-MAKE
ACET-HATCH-LOOP-MAKE-DATA-GET
ACET-HATCH-LOOPEDGE-MAKE
ACET-HELP
ACET-HELP-TRAP
ACET-HOW-TO-GET-EXPRESS
ACET-INI-GET
ACET-INI-SET
ACET-INIT
ACET-INIT-ACETUTIL-ARX
ACET-INIT-ADD-LIB-DIR
ACET-INIT-EXCLUDE-LIST
ACET-INIT-EXPRESS-INSTALLED
ACET-INIT-EXPRESS-NOT-INSTALLED-MSG
ACET-INIT-FAS-LIB
ACET-INIT-FORCE-LOAD-ARX-LIB
ACET-INIT-GET-LIB-DIR
ACET-INIT-PLACEMENU
ACET-INIT-PRODKEY
ACET-INSERT-ATTRIB-GET
ACET-INSERT-ATTRIB-MOD
ACET-INSERT-ATTRIB-SET
ACET-INSERT-SPACIAL-FILTER
ACET-IS-SYMBOL-TABLE
ACET-LAYER-LOCKED
ACET-LAYER-LOCKED-LIST
ACET-LAYER-UNLOCK-ALL
ACET-LAYERP-MARK
ACET-LAYERP-MODE
ACET-LIST-ASSOC-APPEND
ACET-LIST-ASSOC-PUT
ACET-LIST-ASSOC-REMOVE
ACET-LIST-GROUP-BY-ASSOC
ACET-LIST-INSERT-NTH
ACET-LIST-IS-DOTTED-PAIR
ACET-LIST-ISORT
ACET-LIST-M-ASSOC
ACET-LIST-PUT-NTH
ACET-LIST-REMOVE-ADJACENT-DUPS
ACET-LIST-REMOVE-DUPLICATES
ACET-LIST-REMOVE-NTH
ACET-LIST-SPLIT
ACET-LIST-TO-SS
ACET-LSP-LOAD
ACET-LWPLINE-MAKE
ACET-MENU-LOAD
ACET-MENU-LOAD2
ACET-PARTIAL-MENU-STATUS-GET
ACET-PARTIAL-MENU-STATUS-SET
ACET-PATH-TO-LIST
ACET-PLINE-IS-2D
ACET-PLINE-MAKE
ACET-PLINE-SEGMENT-LIST
ACET-PLINE-SEGMENT-LIST-APPLY
ACET-PLINES-EXPLODE
ACET-PLINES-EXPLODE-WIDTH-DATA-GET
ACET-PLINES-REBUILD
ACET-PLINES-REBUILD-APPLY-WIDTHS
ACET-PLINES-REBUILD-SET-ELEVATION
ACET-POINT-FLAT
ACET-PREF-SUPPORTPATH-LIST
ACET-PSPACE-VIEWPORT-ENAME
ACET-R12-DXF-CONVERT
ACET-RE-MAKE
ACET-REACTOR-EXISTS
ACET-REACTOR-REMOVE
ACET-REG-DEL
ACET-REG-GET
ACET-REG-PRODKEY
ACET-REG-PUT
ACET-REG-SETACTIVEX
ACET-REG-TREE-GET
ACET-REG-TREE-SET
ACET-RTOD
ACET-SAFE-COMMAND
ACET-SET-CMDECHO
ACET-SETVAR
ACET-SETVAR-CPROFILE
ACET-SETVAR-DWG
ACET-SETVAR-FIXED-PROFILE
ACET-SPINNER
ACET-SS-ANNOTATION-FILTER
ACET-SS-CLEAR-PREV
ACET-SS-CONVERT-ELLIPSES-TO-PLINES
ACET-SS-DRAG-MOVE
ACET-SS-DRAG-ROTATE
ACET-SS-DRAG-SCALE
ACET-SS-ENTDEL
ACET-SS-FILTER
ACET-SS-FILTER-CURRENT-UCS
ACET-SS-FILTER-ITEM
ACET-SS-FILTER-VALIDATE
ACET-SS-FLT-CSPACE
ACET-SS-INTERSECTION
ACET-SS-NEW
ACET-SS-REDRAW
ACET-SS-REMOVE
ACET-SS-REMOVE-DUPS
ACET-SS-REMOVE-DUPS-EXTENTS-LIST
ACET-SS-REMOVE-DUPS-GENERALIZE-ENT
ACET-SS-REMOVE-DUPS-REVERSE
ACET-SS-SCALE-TO-FIT
ACET-SS-SCALE-TO-FIT-BASE
ACET-SS-SORT
ACET-SS-SSGET-FILTER
ACET-SS-TO-LIST
ACET-SS-UNION
ACET-SS-VISIBLE
ACET-SS-ZOOM-EXTENTS
ACET-STR-COLLATE
ACET-STR-ENV-EXPAND
ACET-STR-EQUAL
ACET-STR-ESC-WILDCARDS
ACET-STR-FIND
ACET-STR-FORMAT
ACET-STR-IS-PRINTABLE
ACET-STR-LIST-SELECT
ACET-STR-LR-TRIM
ACET-STR-M-FIND
ACET-STR-REPLACE
ACET-STR-SPACE-TRIM
ACET-STR-TO-LIST
ACET-STR-WCMATCH
ACET-SYS-BEEP
ACET-SYS-COMMAND
ACET-SYS-CONTROL-DOWN
ACET-SYS-FOREGROUND
ACET-SYS-KEYSTATE
ACET-SYS-LASTERR
ACET-SYS-LMOUSE-DOWN
ACET-SYS-PROCID
ACET-SYS-SHIFT-DOWN
ACET-SYS-SLEEP
ACET-SYS-SPAWN
ACET-SYS-TERM
ACET-SYS-WAIT
ACET-SYSVAR-RESTORE
ACET-SYSVAR-SET
ACET-TABLE-NAME-LIST
ACET-TABLE-PURGE
ACET-TEMP-SEGMENT
ACET-TJUST
ACET-TJUST-GROUP-CODES
ACET-TJUST-KEYWORD
ACET-UCS-CAPTURE-VIEWPORTS
ACET-UCS-CMD
ACET-UCS-GET
ACET-UCS-RESTORE-VIEWPORTS
ACET-UCS-SET
ACET-UCS-SET-Z
ACET-UCS-TO-OBJECT
ACET-UI-DRAG
ACET-UI-ENTSEL
ACET-UI-FENCE-SELECT
ACET-UI-GET-LONG-NAME
ACET-UI-GETCORNER
ACET-UI-GETFILE
ACET-UI-M-GET-NAMES
ACET-UI-MESSAGE
ACET-UI-PICKDIR
ACET-UI-POLYGON-SELECT
ACET-UI-PROGRESS
ACET-UI-PROGRESS-DONE
ACET-UI-PROGRESS-INIT
ACET-UI-PROGRESS-SAFE
ACET-UI-SINGLE-SELECT
ACET-UI-STATUS
ACET-UI-TABLE-NAME-CHECK-FLAGS
ACET-UI-TABLE-NAME-FORMAT
ACET-UI-TABLE-NAME-GET
ACET-UI-TABLE-NAME-GET-CMD
ACET-UI-TABLE-NAME-GET-CMD-LIST
ACET-UI-TABLE-NAME-GET-DLG
ACET-UI-TABLE-NAME-GET-ENAME
ACET-UI-TABLE-NAME-GET-IS-VALID
ACET-UI-TABLE-NAME-GET-ITEM-LIST
ACET-UI-TABLE-NAME-GET-PICKIT
ACET-UI-TABLE-NAME-OBJECT-DATA
ACET-UI-TXTED
ACET-UNDO-BEGIN
ACET-UNDO-END
ACET-UNDO-INIT
ACET-UNDO-RESTORE
ACET-UTIL-VER
ACET-VAR-GETVAR
ACET-VAR-SETVAR
ACET-VBALOAD
ACET-VIEWPORT-FROZEN-LAYER-LIST
ACET-VIEWPORT-FROZEN-LAYER-LIST-SET
ACET-VIEWPORT-LOCK-SET
ACET-VIEWPORT-NEXT-PICKABLE
ACET-VIEWPORT-VPFREEZE
ACET-WMFIN
ACET-XDATA-GET
ACET-XDATA-SET
ACET-XREF-CPROJECT-PATH
ACET:ABORTRETRYIGNORE
ACET:ACETAUTO
ACET:ARCHIVE
ACET:ARX-LIB
ACET:DEFBUTTON1
ACET:DEFBUTTON2
ACET:DEFBUTTON3
ACET:DEFBUTTON4
ACET:DIRECTORY
ACET:FAS-LIB
ACET:HELPFILE
ACET:HIDDEN
ACET:ICONINFORMATION
ACET:ICONQUESTION
ACET:ICONSTOP
ACET:ICONWARNING
ACET:IDABORT
ACET:IDCANCEL
ACET:IDCLOSE
ACET:IDHELP
ACET:IDIGNORE
ACET:IDNO
ACET:IDOK
ACET:IDRETRY
ACET:IDYES
ACET:OK
ACET:OKCANCEL
ACET:PRODKEY
ACET:READONLY
ACET:RETRYCANCEL
ACET:SYSTEM
ACET:VARALL
ACET:VARDWG
ACET:VARFIX
ACET:VARPRO
ACET:WEBSITE
ACET:YESNO
ACET:YESNOCANCEL
ACETAI_FFILE
ACETAI_NOFILE
ACETAUTOARXACEDLOAD
ACETAUTOARXLOAD
ACETAUTOLOAD
ACETAUTONATIVELOAD
-
Similarly ...
http://www.theswamp.org/index.php?topic=13719.0
do you have acetutil.CHM (circa 2000)
-
Sorry, I don't use/support/advocate express tools.
-
Sorry, I don't use/support/advocate express tools.
?? Why ??
-
?? Why ??
Analagous to building a house on quick sand.
/imo
-
But I believe a lot of the earlier ones (R14 I believe were open code, so if it was broke it could be fixed) not sure about the later ones, I just keep moving the old one up to the new version of acad (the one I use, which now are very few now. I found it to be more fun to write my own)
Just wondering, I know if we disable them at work, we would have a lot of angry bee's. I find that people rely heavily on them for day to day chores the layer stuff and text stuff mostly.
-
I'm not against users taking advantage of the utilities per se, though I do openly tell folks I won't install or support them.
However I flat out will not use any of the ACET code libraries, and that's what I was making reference to in my first and second posts. There are various authors, some qualified, some not so much; some code is so so, some of it complete crap, some of it resides in arx files without source code ad infinitum, and worse, the package as a whole has historically enjoyed a sporadic existence with regards to licensing and availability. To be aware of these factors and then deliberately invite them into a software project would, imo, be irresponsible -- ergo my first comment.
No thanks, writing and supporting software is challenging enough when (you enjoy the illusion) everything is under your control.
-
I figured that is what you were referring to. You're right about the there sporadic existence and complete lack of documentation. I tried to incorporate the message box into some old code and it turned out to be an all day fiasco that ended in me just deleting the entire code section. Oh well, live and learn.
-
Dear All,
I have got ACETUTIL.CHM help file which is version 1.37 and says "Last Updated on June 24, 2000"
I have come across many LISP routines in the past using many "acet-" functions which are not listed in this help file, maybe because it is very old (14 years old !!!!).
So i want to ask from where can we get latest ACETUTIL.CHM help file containing help for all latest ACET functions ?
Thanks.
-
Not all of them but has a lot...
http://www.afralisp.net/archive/lisp/acet-utils.htm
and then here's an attachment that has them all listen in an excel file
unfortunately there is not a description, though it would likely be able to be added in quite well to this file
-
Dear Bhull,
Unfortunately without description it is difficult to use many functions. I request the veterans to help.
-
There is this Excel file in French by a guy name Gerard Lemoine.
You at least get the number of arguments to the functions for which there is no help.
ACET-FUNCTION.XLS (https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CCgQFjAA&url=http%3A%2F%2Fwww.g-eaux.com%2Fpowerclic%2Fdownload%2Faide_acet_G-EAUX.xls&ei=hKALU6zrDsfW4ASKgoGIDQ&usg=AFQjCNHhCi-pdK-1AbSlzIXRltfvcQVHDw&bvm=bv.61725948,d.bGE)
ymg
-
Thanks. But I am surprised by one thing. Whenever any organization makes a software it also releases a help file for the same. For ACET functions, why Autodesk has not made any help file ? Or I should say that why Autodesk has not updated the help file since year 2000 ?
-
Thanks. But I am surprised by one thing. Whenever any organization makes a software it also releases a help file for the same. For ACET functions, why Autodesk has not made any help file ? Or I should say that why Autodesk has not updated the help file since year 2000 ?
This question should be addressed to AutoDESK.
Perhaps if enough people ask the question directly they MAY think about addressing the issue.
I believe you will need to make a more compelling argument than " Providing up to date and complete documentation is a professional thing to do. "
My gut level feel is that they will only be swayed by a significant financial incentive.
added:
As a related issue, does anyone know how long it's been since the VLIDE has been updated ? Perhaps the answer to that question will indicate how much importants AutoDesk really assigns to it's customizing users.
-
As a related issue, does anyone know how long it's been since the VLIDE has been updated?
May have to use carbon dating to determine that.
-
Not sure if this is any better than the chm, but here it is anyway...
-
For a long time, Express tools wasn't officially supported even though its included in the product. It may still have that notation.
-
For a long time, Express tools wasn't officially supported even though its included in the product. It may still have that notation.
Completely useless information, but it was originally called Bonus Tools.
-
Well they need documentation because probably millions of people are using them and/or will use them.
I will take it upon myself to complete a somewhat-full document for them!!! In fact I've already started, but wont get into my methodology.
Instead I'll just post another extensive list that I found via express tools source code, and as impressive as it is I want to share it.
Thankfully I don't believe as extensive as ALL of the express tools functions are, they don't come close to touching the length of items in the following lists:
Enjoy! I don't believe anyone would be up to matching each of these keywords with descriptions and examples heh!
But please, someone prove me wrong :D
(setq core-symbol-list
'(
"*"
"*ERROR*"
"*VLISP-NEW-FULL-INIT*"
"+"
"-"
"/"
"/="
"1+"
"1-"
":CONSTANTS-PREFIX"
":FALSE"
":METHODS-PREFIX"
":PROG-ID"
":PROPERTIES-PREFIX"
":TLB-FILENAME"
":TRUE"
":VLAX-FALSE"
":VLAX-NULL"
":VLAX-TRUE"
"<"
"<="
"="
">"
">="
"ABS"
"ACAD_COLORDLG"
"ACAD_STRLSORT"
"ACTION_TILE"
"ADD_LIST"
"ADS"
"ALERT"
"ALLOC"
"AND"
"ANGLE"
"ANGTOF"
"ANGTOS"
"APPEND"
"APPLY"
"ARX"
"ARXLOAD"
"ARXUNLOAD"
"ASCII"
"ASSOC"
"ATAN"
"ATOF"
"ATOI"
"ATOM"
"ATOMS-FAMILY"
"BHATCH"
"BHERRS"
"BOOLE"
"BOUNDP"
"BPOLY"
"C:PSDRAG"
"C:PSFILL"
"C:PSIN"
"C:VLIDE"
"CAAAAR"
"CAAADR"
"CAAAR"
"CAADAR"
"CAADDR"
"CAADR"
"CAAR"
"CADAAR"
"CADADR"
"CADAR"
"CADDAR"
"CADDDR"
"CADDR"
"CADR"
"CAR"
"CDAAAR"
"CDAADR"
"CDAAR"
"CDADAR"
"CDADDR"
"CDADR"
"CDAR"
"CDDAAR"
"CDDADR"
"CDDAR"
"CDDDAR"
"CDDDDR"
"CDDDR"
"CDDR"
"CDR"
"CHR"
"CLIENT_DATA_TILE"
"CLOSE"
"COMMAND"
"COND"
"CONS"
"COS"
"CVUNIT"
"DEFUN"
"DEFUN-Q"
"DEFUN-Q-LIST-REF"
"DEFUN-Q-LIST-SET"
"DICTADD"
"DICTNEXT"
"DICTREMOVE"
"DICTRENAME"
"DICTSEARCH"
"DIMX_TILE"
"DIMY_TILE"
"DISTANCE"
"DISTOF"
"DONE_DIALOG"
"END_IMAGE"
"END_LIST"
"ENTDEL"
"ENTGET"
"ENTLAST"
"ENTMAKE"
"ENTMAKEX"
"ENTMOD"
"ENTNEXT"
"ENTSEL"
"ENTUPD"
"EQ"
"EQUAL"
"EVAL"
"EXIT"
"EXP"
"EXPAND"
"EXPT"
"FILL_IMAGE"
"FINDFILE"
"FIX"
"FLOAT"
"FNSPLITL"
"FOREACH"
"FUNCTION"
"GC"
"GCD"
"GETANGLE"
"GETCFG"
"GETCNAME"
"GETCORNER"
"GETDIST"
"GETENV"
"GETFILED"
"GETINT"
"GETKWORD"
"GETORIENT"
"GETPOINT"
"GETREAL"
"GETSTRING"
"GETURL"
"GETVAR"
"GET_ATTR"
"GET_TILE"
"GRAPHSCR"
"GRCLEAR"
"GRDRAW"
"GRREAD"
"GRTEXT"
"GRVECS"
"HANDENT"
"HELP"
"IF"
"INITDIA"
"INITGET"
"INTERS"
"ISMNUGRPLOADED"
"ITOA"
"LAMBDA"
"LAST"
"LAYOUTLIST"
"LENGTH"
"LIST"
"LISTP"
"LOAD"
"LOAD_DIALOG"
"LOG"
"LOGAND"
"LOGIOR"
"LSH"
"MAPCAR"
"MAX"
"MEM"
"MEMBER"
"MENUCMD"
"MENUGROUP"
"MIN"
"MINUSP"
"MODE_TILE"
"MTEDIT"
"MTPROP"
"NAMEDOBJDICT"
"NENTSEL"
"NENTSELP"
"NEW_DIALOG"
"NOT"
"NTH"
"NULL"
"NUMBERP"
"OPEN"
"OR"
"OSNAP"
"PAUSE"
"PI"
"POLAR"
"PRAGMA"
"PRIN1"
"PRINC"
"PRINT"
"PROGN"
"PROMPT"
"QUIT"
"QUOTE"
"READ"
"READ-CHAR"
"READ-LINE"
"REDRAW"
"REGAPP"
"REM"
"REPEAT"
"REPORT"
"REVERSE"
"RTOS"
"SET"
"SETCFG"
"SETENV"
"SETFUNHELP"
"SETQ"
"SETURL"
"SETVAR"
"SETVIEW"
"SET_TILE"
"SIN"
"SLIDE_IMAGE"
"SNVALID"
"SQRT"
"SSADD"
"SSDEL"
"SSGET"
"SSGETFIRST"
"SSLENGTH"
"SSMEMB"
"SSNAME"
"SSNAMEX"
"SSSETFIRST"
"STARTAPP"
"START_DIALOG"
"START_IMAGE"
"START_LIST"
"STRCASE"
"STRCAT"
"STRLEN"
"SUBST"
"SUBSTR"
"T"
"TABLET"
"TBLNEXT"
"TBLOBJNAME"
"TBLSEARCH"
"TERM_DIALOG"
"TERPRI"
"TEXTBOX"
"TEXTPAGE"
"TEXTSCR"
"TRACE"
"TRANS"
"TYPE"
"UNLOAD_DIALOG"
"UNTRACE"
"VECTOR_IMAGE"
"VER"
"VL-ACAD-DEFUN"
"VL-ACAD-UNDEFUN"
"VL-ARX-IMPORT"
"VL-BB-REF"
"VL-BB-SET"
"VL-BT"
"VL-BT-OFF"
"VL-BT-ON"
"VL-CMDF"
"VL-CONSP"
"VL-DIRECTORY-FILES"
"VL-DOC-EXPORT"
"VL-DOC-IMPORT"
"VL-DOC-REF"
"VL-DOC-SET"
"VL-EVERY"
"VL-EXIT-WITH-ERROR"
"VL-EXIT-WITH-VALUE"
"VL-FILE-COPY"
"VL-FILE-DELETE"
"VL-FILE-DIRECTORY-P"
"VL-FILE-RENAME"
"VL-FILE-SIZE"
"VL-FILE-SYSTIME"
"VL-FILENAME-BASE"
"VL-FILENAME-DIRECTORY"
"VL-FILENAME-EXTENSION"
"VL-FILENAME-MKTEMP"
"VL-GET-RESOURCE"
"VL-INFP"
"VL-INIT"
"VL-LIST*"
"VL-LIST->STRING"
"VL-LIST-EXPORTED-FUNCTIONS"
"VL-LIST-LENGTH"
"VL-LIST-LOADED-VLX"
"VL-LOAD-ALL"
"VL-LOAD-COM"
"VL-LOAD-REACTORS"
"VL-MEMBER-IF"
"VL-MEMBER-IF-NOT"
"VL-MKDIR"
"VL-NANP"
"VL-POSITION"
"VL-PRIN1-TO-STRING"
"VL-PRINC-TO-STRING"
"VL-PROPAGATE"
"VL-REGISTRY-DELETE"
"VL-REGISTRY-DESCENDENTS"
"VL-REGISTRY-READ"
"VL-REGISTRY-WRITE"
"VL-REMOVE"
"VL-REMOVE-IF"
"VL-REMOVE-IF-NOT"
"VL-SOME"
"VL-SORT"
"VL-SORT-I"
"VL-STRING->LIST"
"VL-STRING-ELT"
"VL-STRING-LEFT-TRIM"
"VL-STRING-MISMATCH"
"VL-STRING-POSITION"
"VL-STRING-RIGHT-TRIM"
"VL-STRING-SEARCH"
"VL-STRING-SUBST"
"VL-STRING-TRANSLATE"
"VL-STRING-TRIM"
"VL-SYMBOL-NAME"
"VL-SYMBOL-VALUE"
"VL-SYMBOLP"
"VL-UNLOAD-VLX"
"VL-VBALOAD"
"VL-VBARUN"
"VLARTS-INIT"
"VLAX-FOR"
"VLISP-DCLRES-LIST"
"VLISP-DCLRES-LOAD-DIALOG"
"VLISP-EXPORT-SYMBOL"
"VLISP-FASRES-LIST"
"VLISP-FASRES-LOAD"
"VLISP-IMPORT-EXSUBRS"
"VLISP-IMPORT-SYMBOL"
"VLISP-INIRES-LIST"
"VLX-LOADED-P"
"VMON"
"VPORTS"
"WCMATCH"
"WHILE"
"WRITE-CHAR"
"WRITE-LINE"
"XDROOM"
"XDSIZE"
"XSTRCASE"
"ZEROP"
"_VER"
"_VL-FAST-MODE"
"_VL-TIMES"
"_VLISP-VERSION"
"~"
)
)
-
(setq com-symbol-list
'(
":VLR-"
":VLR-ABORTATTACH"
":VLR-ABORTDEEPCLONE"
":VLR-ABORTDXFIN"
":VLR-ABORTDXFOUT"
":VLR-ABORTINSERT"
":VLR-ABORTRESTORE"
":VLR-ABORTWBLOCK"
":VLR-ACDB-REACTOR"
":VLR-BEGINATTACH"
":VLR-BEGINCLOSE"
":VLR-BEGINDEEPCLONE"
":VLR-BEGINDEEPCLONEXLATION"
":VLR-BEGINDOUBLECLICK"
":VLR-BEGINDWGOPEN"
":VLR-BEGINDXFIN"
":VLR-BEGINDXFOUT"
":VLR-BEGININSERT"
":VLR-BEGININSERTM"
":VLR-BEGINRESTORE"
":VLR-BEGINRIGHTCLICK"
":VLR-BEGINSAVE"
":VLR-BEGINWBLOCK"
":VLR-BEGINWBLOCKID"
":VLR-BEGINWBLOCKOBJECTS"
":VLR-BEGINWBLOCKPT"
":VLR-CANCELLED"
":VLR-COMANDEERED"
":VLR-COMMAND-REACTOR"
":VLR-COMMANDCANCELLED"
":VLR-COMMANDENDED"
":VLR-COMMANDFAILED"
":VLR-COMMANDWILLSTART"
":VLR-COPIED"
":VLR-DATABASECONSTRUCTED"
":VLR-DATABASETOBEDESTROYED"
":VLR-DEEPCLONE-REACTOR"
":VLR-DOCFRAMEMOVEDORRESIZED"
":VLR-DOCMANAGER-REACTOR"
":VLR-DOCUMENTBECAMECURRENT"
":VLR-DOCUMENTCREATED"
":VLR-DOCUMENTLOCKMODECHANGED"
":VLR-DOCUMENTLOCKMODECHANGEVETOED"
":VLR-DOCUMENTLOCKMODEWILLCHANGE"
":VLR-DOCUMENTTOBEACTIVATED"
":VLR-DOCUMENTTOBEDEACTIVATED"
":VLR-DOCUMENTTOBEDESTROYED"
":VLR-DWG-REACTOR"
":VLR-DWGFILEOPENED"
":VLR-DXF-REACTOR"
":VLR-DXFINCOMPLETE"
":VLR-DXFOUTCOMPLETE"
":VLR-EDITOR-REACTOR"
":VLR-ENDATTACH"
":VLR-ENDDEEPCLONE"
":VLR-ENDDWGOPEN"
":VLR-ENDINSERT"
":VLR-ENDRESTORE"
":VLR-ENDWBLOCK"
":VLR-ERASED"
":VLR-GOODBYE"
":VLR-INSERT-REACTOR"
":VLR-LAYOUTSWITCHED"
":VLR-LINKER-REACTOR"
":VLR-LISP-REACTOR"
":VLR-LISPCANCELLED"
":VLR-LISPENDED"
":VLR-LISPWILLSTART"
":VLR-MAINFRAMEMOVEDORRESIZED"
":VLR-MISCELLANEOUS-REACTOR"
":VLR-MODIFIED"
":VLR-MODIFIEDXDATA"
":VLR-MODIFYUNDONE"
":VLR-MOUSE-REACTOR"
":VLR-OBJECT-REACTOR"
":VLR-OBJECTAPPENDED"
":VLR-OBJECTCLOSED"
":VLR-OBJECTERASED"
":VLR-OBJECTMODIFIED"
":VLR-OBJECTOPENEDFORMODIFY"
":VLR-OBJECTREAPPENDED"
":VLR-OBJECTUNAPPENDED"
":VLR-OBJECTUNERASED"
":VLR-OPENEDFORMODIFY"
":VLR-OTHERATTACH"
":VLR-OTHERINSERT"
":VLR-OTHERWBLOCK"
":VLR-PICKFIRSTMODIFIED"
":VLR-REAPPENDED"
":VLR-REDIRECTED"
":VLR-RXAPPLOADED"
":VLR-RXAPPUNLOADED"
":VLR-SAVECOMPLETE"
":VLR-SUBOBJMODIFIED"
":VLR-SYSVAR-REACTOR"
":VLR-SYSVARCHANGED"
":VLR-SYSVARWILLCHANGE"
":VLR-TOOLBAR-REACTOR"
":VLR-TOOLBARBITMAPSIZECHANGED"
":VLR-TOOLBARBITMAPSIZEWILLCHANGE"
":VLR-UNAPPENDED"
":VLR-UNDO-REACTOR"
":VLR-UNDOSUBCOMMANDAUTO"
":VLR-UNDOSUBCOMMANDBACK"
":VLR-UNDOSUBCOMMANDBEGIN"
":VLR-UNDOSUBCOMMANDCONTROL"
":VLR-UNDOSUBCOMMANDEND"
":VLR-UNDOSUBCOMMANDMARK"
":VLR-UNDOSUBCOMMANDNUMBER"
":VLR-UNERASED"
":VLR-UNKNOWNCOMMAND"
":VLR-WBLOCK-REACTOR"
":VLR-WBLOCKNOTICE"
":VLR-WINDOW-REACTOR"
":VLR-XREF-REACTOR"
":VLR-XREFSUBCOMMANDATTACHITEM"
":VLR-XREFSUBCOMMANDBINDITEM"
":VLR-XREFSUBCOMMANDDETACHITEM"
":VLR-XREFSUBCOMMANDOVERLAYITEM"
":VLR-XREFSUBCOMMANDPATHITEM"
":VLR-XREFSUBCOMMANDRELOADITEM"
":VLR-XREFSUBCOMMANDUNLOADITEM"
"AC0DEGREES"
"AC100_1"
"AC10_1"
"AC180DEGREES"
"AC1FT_1FT"
"AC1IN_1FT"
"AC1_1"
"AC1_10"
"AC1_100"
"AC1_128IN_1FT"
"AC1_16"
"AC1_16IN_1FT"
"AC1_2"
"AC1_20"
"AC1_2IN_1FT"
"AC1_30"
"AC1_32IN_1FT"
"AC1_4"
"AC1_40"
"AC1_4IN_1FT"
"AC1_50"
"AC1_64IN_1FT"
"AC1_8"
"AC1_8IN_1FT"
"AC270DEGREES"
"AC2_1"
"AC3DFACE"
"AC3DPOLYLINE"
"AC3DSOLID"
"AC3IN_1FT"
"AC3_16IN_1FT"
"AC3_32IN_1FT"
"AC3_4IN_1FT"
"AC3_8IN_1FT"
"AC4_1"
"AC6IN_1FT"
"AC8_1"
"AC90DEGREES"
"ACABOVE"
"ACACTIVEVIEWPORT"
"ACALIGNMENTALIGNED"
"ACALIGNMENTBOTTOMCENTER"
"ACALIGNMENTBOTTOMLEFT"
"ACALIGNMENTBOTTOMRIGHT"
"ACALIGNMENTCENTER"
"ACALIGNMENTFIT"
"ACALIGNMENTLEFT"
"ACALIGNMENTMIDDLE"
"ACALIGNMENTMIDDLECENTER"
"ACALIGNMENTMIDDLELEFT"
"ACALIGNMENTMIDDLERIGHT"
"ACALIGNMENTRIGHT"
"ACALIGNMENTTOPCENTER"
"ACALIGNMENTTOPLEFT"
"ACALIGNMENTTOPRIGHT"
"ACALIGNPNTACQUISITIONAUTOMATIC"
"ACALIGNPNTACQUISITIONSHIFTTOACQUIRE"
"ACALLVIEWPORTS"
"ACARC"
"ACARCHITECTURAL"
"ACARROWARCHTICK"
"ACARROWBOXBLANK"
"ACARROWBOXFILLED"
"ACARROWCLOSED"
"ACARROWCLOSEDBLANK"
"ACARROWDATUMBLANK"
"ACARROWDATUMFILLED"
"ACARROWDEFAULT"
"ACARROWDOT"
"ACARROWDOTBLANK"
"ACARROWDOTSMALL"
"ACARROWINTEGRAL"
"ACARROWNONE"
"ACARROWOBLIQUE"
"ACARROWOPEN"
"ACARROWOPEN30"
"ACARROWOPEN90"
"ACARROWORIGIN"
"ACARROWORIGIN2"
"ACARROWSMALL"
"ACARROWSONLY"
"ACARROWUSERDEFINED"
"ACATTACHMENTPOINTBOTTOMCENTER"
"ACATTACHMENTPOINTBOTTOMLEFT"
"ACATTACHMENTPOINTBOTTOMRIGHT"
"ACATTACHMENTPOINTMIDDLECENTER"
"ACATTACHMENTPOINTMIDDLELEFT"
"ACATTACHMENTPOINTMIDDLERIGHT"
"ACATTACHMENTPOINTTOPCENTER"
"ACATTACHMENTPOINTTOPLEFT"
"ACATTACHMENTPOINTTOPRIGHT"
"ACATTRIBUTE"
"ACATTRIBUTEMODECONSTANT"
"ACATTRIBUTEMODEINVISIBLE"
"ACATTRIBUTEMODEPRESET"
"ACATTRIBUTEMODEVERIFY"
"ACATTRIBUTEREFERENCE"
"ACBASEMENUGROUP"
"ACBESTFIT"
"ACBEZIERSURFACEMESH"
"ACBLOCKREFERENCE"
"ACBLUE"
"ACBOTTOMTOTOP"
"ACBYBLOCK"
"ACBYLAYER"
"ACBYSTYLE"
"ACCENTERLINE"
"ACCENTERMARK"
"ACCENTERNONE"
"ACCIRCLE"
"ACCUBICSPLINE3DPOLY"
"ACCUBICSPLINEPOLY"
"ACCUBICSURFACEMESH"
"ACCYAN"
"ACDECIMAL"
"ACDEFAULTUNITS"
"ACDEGREEMINUTESECONDS"
"ACDEGREES"
"ACDEMANDLOADCMDINVOKE"
"ACDEMANDLOADDISABLED"
"ACDEMANDLOADENABLED"
"ACDEMANDLOADENABLEDWITHCOPY"
"ACDEMANDLOADONOBJECTDETECT"
"ACDEMANLOADDISABLE"
"ACDIAGONAL"
"ACDIM3POINTANGULAR"
"ACDIMALIGNED"
"ACDIMANGULAR"
"ACDIMARCHITECTURAL"
"ACDIMARCHITECTURALSTACKED"
"ACDIMDECIMAL"
"ACDIMDIAMETRIC"
"ACDIMENGINEERING"
"ACDIMFRACTIONAL"
"ACDIMFRACTIONALSTACKED"
"ACDIMLARCHITECTURAL"
"ACDIMLDECIMAL"
"ACDIMLENGINEERING"
"ACDIMLFRACTIONAL"
"ACDIMLINEWITHTEXT"
"ACDIMLSCIENTIFIC"
"ACDIMLWINDOWSDESKTOP"
"ACDIMORDINATE"
"ACDIMPRECISIONEIGHT"
"ACDIMPRECISIONFIVE"
"ACDIMPRECISIONFOUR"
"ACDIMPRECISIONONE"
"ACDIMPRECISIONSEVEN"
"ACDIMPRECISIONSIX"
"ACDIMPRECISIONTHREE"
"ACDIMPRECISIONTWO"
"ACDIMPRECISIONZERO"
"ACDIMRADIAL"
"ACDIMROTATED"
"ACDIMSCIENTIFIC"
"ACDIMWINDOWSDESKTOP"
"ACDISPLAY"
"ACDISPLAYDCS"
"ACDRAGDISPLAYAUTOMATICALLY"
"ACDRAGDISPLAYONREQUEST"
"ACDRAGDONOTDISPLAY"
"ACELLIPSE"
"ACENGINEERING"
"ACENGLISH"
"ACEXTENDBOTH"
"ACEXTENDNONE"
"ACEXTENDOTHERENTITY"
"ACEXTENDTHISENTITY"
"ACEXTENTS"
"ACEXTERNALREFERENCE"
"ACFALSE"
"ACFIRSTEXTENSIONLINE"
"ACFITCURVEPOLY"
"ACFONTBOLD"
"ACFONTBOLDITALIC"
"ACFONTITALIC"
"ACFONTREGULAR"
"ACFRACTIONAL"
"ACFULLPREVIEW"
"ACGRADS"
"ACGREEN"
"ACGROUP"
"ACHATCH"
-
"ACHATCHLOOPTYPEDEFAULT"
"ACHATCHLOOPTYPEDERIVED"
"ACHATCHLOOPTYPEEXTERNAL"
"ACHATCHLOOPTYPEPOLYLINE"
"ACHATCHLOOPTYPETEXTBOX"
"ACHATCHPATTERNTYPECUSTOMDEFINED"
"ACHATCHPATTERNTYPEPREDEFINED"
"ACHATCHPATTERNTYPEUSERDEFINED"
"ACHATCHSTYLEIGNORE"
"ACHATCHSTYLENORMAL"
"ACHATCHSTYLEOUTER"
"ACHORIZONTAL"
"ACHORIZONTALALIGNMENTALIGNED"
"ACHORIZONTALALIGNMENTCENTER"
"ACHORIZONTALALIGNMENTFIT"
"ACHORIZONTALALIGNMENTLEFT"
"ACHORIZONTALALIGNMENTMIDDLE"
"ACHORIZONTALALIGNMENTRIGHT"
"ACHORZCENTERED"
"ACINCHES"
"ACINSERTUNITSANGSTROMS"
"ACINSERTUNITSASTRONOMICALUNITS"
"ACINSERTUNITSAUTOASSIGN"
"ACINSERTUNITSCENTIMETERS"
"ACINSERTUNITSDECAMETERS"
"ACINSERTUNITSDECIMETERS"
"ACINSERTUNITSFEET"
"ACINSERTUNITSGIGAMETERS"
"ACINSERTUNITSHECTOMETERS"
"ACINSERTUNITSINCHES"
"ACINSERTUNITSKILOMETERS"
"ACINSERTUNITSLIGHTYEARS"
"ACINSERTUNITSMETERS"
"ACINSERTUNITSMICROINCHES"
"ACINSERTUNITSMICRONS"
"ACINSERTUNITSMILES"
"ACINSERTUNITSMILLIMETERS"
"ACINSERTUNITSMILS"
"ACINSERTUNITSNANOMETERS"
"ACINSERTUNITSPARSECS"
"ACINSERTUNITSPROMPT"
"ACINSERTUNITSUNITLESS"
"ACINSERTUNITSYARDS"
"ACINTERSECTION"
"ACJIS"
"ACKEYBOARDENTRY"
"ACKEYBOARDENTRYEXCEPTSCRIPTS"
"ACKEYBOARDRUNNINGOBJSNAP"
"ACLAYOUT"
"ACLEADER"
"ACLEFTTORIGHT"
"ACLIMITS"
"ACLINE"
"ACLINENOARROW"
"ACLINESPACINGSTYLEATLEAST"
"ACLINESPACINGSTYLEEXACTLY"
"ACLINEWITHARROW"
"ACLNWT000"
"ACLNWT005"
"ACLNWT009"
"ACLNWT013"
"ACLNWT015"
"ACLNWT018"
"ACLNWT020"
"ACLNWT025"
"ACLNWT030"
"ACLNWT035"
"ACLNWT040"
"ACLNWT050"
"ACLNWT053"
"ACLNWT060"
"ACLNWT070"
"ACLNWT080"
"ACLNWT090"
"ACLNWT100"
"ACLNWT106"
"ACLNWT120"
"ACLNWT140"
"ACLNWT158"
"ACLNWT200"
"ACLNWT211"
"ACLNWTBYBLOCK"
"ACLNWTBYLAYER"
"ACLNWTBYLWDEFAULT"
"ACMAGENTA"
"ACMAX"
"ACMENUFILECOMPILED"
"ACMENUFILESOURCE"
"ACMENUITEM"
"ACMENUSEPARATOR"
"ACMENUSUBMENU"
"ACMETRIC"
"ACMILLIMETERS"
"ACMIN"
"ACMINSERTBLOCK"
"ACMLINE"
"ACMODELSPACE"
"ACMOVETEXTADDLEADER"
"ACMOVETEXTNOLEADER"
"ACMTEXT"
"ACNATIVE"
"ACNORM"
"ACNOTSTACKED"
"ACOFF"
"ACON"
"ACOQGRAPHICS"
"ACOQHIGHPHOTO"
"ACOQLINEART"
"ACOQPHOTO"
"ACOQTEXT"
"ACOUTSIDE"
"ACOVERFIRSTEXTENSION"
"ACOVERSECONDEXTENSION"
"ACPALETTEBYDRAWING"
"ACPALETTEBYSESSION"
"ACPAPERSPACE"
"ACPAPERSPACEDCS"
"ACPARTIALMENUGROUP"
"ACPARTIALPREVIEW"
"ACPENWIDTH013"
"ACPENWIDTH018"
"ACPENWIDTH025"
"ACPENWIDTH035"
"ACPENWIDTH050"
"ACPENWIDTH070"
"ACPENWIDTH100"
"ACPENWIDTH140"
"ACPENWIDTH200"
"ACPENWIDTHUNK"
"ACPIXELS"
"ACPLOTORIENTATIONLANDSCAPE"
"ACPLOTORIENTATIONPORTRAIT"
"ACPOINT"
"ACPOLICYLEGACYDEFAULT"
"ACPOLICYLEGACYLEGACY"
"ACPOLICYLEGACYQUERY"
"ACPOLICYNEWDEFAULT"
"ACPOLICYNEWLEGACY"
"ACPOLYFACEMESH"
"ACPOLYLINE"
"ACPOLYLINELIGHT"
"ACPOLYMESH"
"ACPREFERENCECLASSIC"
"ACPREFERENCECUSTOM"
"ACPRINTERALERTONCE"
"ACPRINTERALWAYSALERT"
"ACPRINTERNEVERALERT"
"ACPRINTERNEVERALERTLOGONCE"
"ACPROXYBOUNDINGBOX"
"ACPROXYNOTSHOW"
"ACPROXYSHOW"
"ACPVIEWPORT"
"ACQUADSPLINE3DPOLY"
"ACQUADSPLINEPOLY"
"ACQUADSURFACEMESH"
"ACR12_DXF"
"ACR13_DWG"
"ACR13_DXF"
"ACR14_DWG"
"ACR14_DXF"
"ACR15_DWG"
"ACR15_DXF"
"ACR15_TEMPLATE"
"ACRADIANS"
"ACRASTER"
"ACRAY"
"ACRED"
"ACREGION"
"ACRIGHTTOLEFT"
"ACSCALETOFIT"
"ACSCIENTIFIC"
"ACSECONDEXTENSIONLINE"
"ACSELECTIONSETALL"
"ACSELECTIONSETCROSSING"
"ACSELECTIONSETCROSSINGPOLYGON"
"ACSELECTIONSETFENCE"
"ACSELECTIONSETLAST"
"ACSELECTIONSETPREVIOUS"
"ACSELECTIONSETWINDOW"
"ACSELECTIONSETWINDOWPOLYGON"
"ACSHAPE"
"ACSIMPLE3DPOLY"
"ACSIMPLEMESH"
"ACSIMPLEPOLY"
"ACSOLID"
"ACSPLINE"
"ACSPLINENOARROW"
"ACSPLINEWITHARROW"
"ACSUBTRACTION"
"ACTEXT"
"ACTEXTANDARROWS"
"ACTEXTFLAGBACKWARD"
"ACTEXTFLAGUPSIDEDOWN"
"ACTEXTONLY"
"ACTOLBASIC"
"ACTOLBOTTOM"
"ACTOLDEVIATION"
"ACTOLERANCE"
"ACTOLLIMITS"
"ACTOLMIDDLE"
"ACTOLNONE"
"ACTOLSYMMETRICAL"
"ACTOLTOP"
"ACTOOLBARBUTTON"
"ACTOOLBARCONTROL"
"ACTOOLBARDOCKBOTTOM"
"ACTOOLBARDOCKLEFT"
"ACTOOLBARDOCKRIGHT"
"ACTOOLBARDOCKTOP"
"ACTOOLBARFLOATING"
"ACTOOLBARFLYOUT"
"ACTOOLBARSEPARATOR"
"ACTOPTOBOTTOM"
"ACTRACE"
"ACTRUE"
"ACUCS"
"ACUNION"
"ACUNKNOWN"
"ACVERTCENTERED"
"ACVERTICALALIGNMENTBASELINE"
"ACVERTICALALIGNMENTBOTTOM"
"ACVERTICALALIGNMENTMIDDLE"
"ACVERTICALALIGNMENTTOP"
"ACVIEW"
"ACVIEWPORT2HORIZONTAL"
"ACVIEWPORT2VERTICAL"
"ACVIEWPORT3ABOVE"
"ACVIEWPORT3BELOW"
"ACVIEWPORT3HORIZONTAL"
"ACVIEWPORT3LEFT"
"ACVIEWPORT3RIGHT"
"ACVIEWPORT3VERTICAL"
"ACVIEWPORT4"
"ACVP100_1"
"ACVP10_1"
"ACVP1FT_1FT"
"ACVP1IN_1FT"
"ACVP1_1"
"ACVP1_10"
"ACVP1_100"
"ACVP1_128IN_1FT"
"ACVP1_16"
"ACVP1_16IN_1FT"
"ACVP1_2"
"ACVP1_20"
"ACVP1_2IN_1FT"
"ACVP1_30"
"ACVP1_32IN_1FT"
"ACVP1_4"
"ACVP1_40"
"ACVP1_4IN_1FT"
"ACVP1_50"
"ACVP1_64IN_1FT"
"ACVP1_8"
"ACVP1_8IN_1FT"
"ACVP2_1"
"ACVP3IN_1FT"
"ACVP3_16IN_1FT"
"ACVP3_32IN_1FT"
"ACVP3_4IN_1FT"
"ACVP3_8IN_1FT"
"ACVP4_1"
"ACVP6IN_1FT"
"ACVP8_1"
"ACVPCUSTOMSCALE"
"ACVPSCALETOFIT"
"ACWHITE"
"ACWINDOW"
"ACWORLD"
"ACXLINE"
"ACYELLOW"
"ACZOOMSCALEDABSOLUTE"
"ACZOOMSCALEDRELATIVE"
"ACZOOMSCALEDRELATIVEPSPACE"
"SAFEARRAY"
"SAFEARRAY-GET-DIM"
"SAFEARRAY-GET-ELEMENT"
"SAFEARRAY-GET-L-BOUND"
"SAFEARRAY-GET-U-BOUND"
"SAFEARRAY-PUT-ELEMENT"
"SAFEARRAY-TYPE"
"SAFEARRAY-VALUE"
"VARIANT"
"VARIANT-TYPE"
"VARIANT-VALUE"
"VLA-ACTIVATE"
"VLA-ADD"
"VLA-ADD3DFACE"
"VLA-ADD3DMESH"
"VLA-ADD3DPOLY"
"VLA-ADDARC"
"VLA-ADDATTRIBUTE"
"VLA-ADDBOX"
"VLA-ADDCIRCLE"
"VLA-ADDCONE"
"VLA-ADDCUSTOMOBJECT"
"VLA-ADDCYLINDER"
"VLA-ADDDIM3POINTANGULAR"
"VLA-ADDDIMALIGNED"
"VLA-ADDDIMANGULAR"
"VLA-ADDDIMDIAMETRIC"
"VLA-ADDDIMORDINATE"
"VLA-ADDDIMRADIAL"
"VLA-ADDDIMROTATED"
"VLA-ADDELLIPSE"
"VLA-ADDELLIPTICALCONE"
"VLA-ADDELLIPTICALCYLINDER"
"VLA-ADDEXTRUDEDSOLID"
"VLA-ADDEXTRUDEDSOLIDALONGPATH"
"VLA-ADDFITPOINT"
"VLA-ADDHATCH"
"VLA-ADDITEMS"
"VLA-ADDLEADER"
"VLA-ADDLIGHTWEIGHTPOLYLINE"
"VLA-ADDLINE"
"VLA-ADDMENUITEM"
"VLA-ADDMINSERTBLOCK"
"VLA-ADDMLINE"
"VLA-ADDMTEXT"
"VLA-ADDOBJECT"
"VLA-ADDPOINT"
"VLA-ADDPOLYFACEMESH"
"VLA-ADDPOLYLINE"
"VLA-ADDPVIEWPORT"
"VLA-ADDRASTER"
"VLA-ADDRAY"
"VLA-ADDREGION"
"VLA-ADDREVOLVEDSOLID"
"VLA-ADDSEPARATOR"
"VLA-ADDSHAPE"
"VLA-ADDSOLID"
"VLA-ADDSPHERE"
"VLA-ADDSPLINE"
"VLA-ADDSUBMENU"
"VLA-ADDTEXT"
"VLA-ADDTOLERANCE"
"VLA-ADDTOOLBARBUTTON"
"VLA-ADDTORUS"
"VLA-ADDTRACE"
"VLA-ADDVERTEX"
"VLA-ADDWEDGE"
"VLA-ADDXLINE"
"VLA-ADDXRECORD"
"VLA-ANGLEFROMXAXIS"
"VLA-ANGLETOREAL"
"VLA-ANGLETOSTRING"
"VLA-APPENDINNERLOOP"
"VLA-APPENDITEMS"
"VLA-APPENDOUTERLOOP"
"VLA-APPENDVERTEX"
"VLA-ARRAYPOLAR"
"VLA-ARRAYRECTANGULAR"
"VLA-ATTACHEXTERNALREFERENCE"
"VLA-ATTACHTOOLBARTOFLYOUT"
"VLA-AUDITINFO"
"VLA-BIND"
"VLA-BOOLEAN"
"VLA-CHECKINTERFERENCE"
"VLA-CLEAR"
"VLA-CLIPBOUNDARY"
"VLA-CLOSE"
"VLA-COPY"
"VLA-COPYFROM"
"VLA-CREATETYPEDARRAY"
"VLA-DELETE"
"VLA-DELETEFITPOINT"
"VLA-DELETEPROFILE"
"VLA-DETACH"
"VLA-DISPLAY"
"VLA-DISPLAYPLOTPREVIEW"
"VLA-DISTANCETOREAL"
"VLA-DOCK"
"VLA-ELEVATEORDER"
"VLA-ENDUNDOMARK"
"VLA-ERASE"
"VLA-EVAL"
"VLA-EVALUATE"
"VLA-EXPLODE"
"VLA-EXPORT"
"VLA-EXPORTPROFILE"
"VLA-FLOAT"
-
"VLA-GET-ACTIVE"
"VLA-GET-ACTIVEDIMSTYLE"
"VLA-GET-ACTIVEDOCUMENT"
"VLA-GET-ACTIVELAYER"
"VLA-GET-ACTIVELAYOUT"
"VLA-GET-ACTIVELINETYPE"
"VLA-GET-ACTIVEPROFILE"
"VLA-GET-ACTIVEPVIEWPORT"
"VLA-GET-ACTIVESELECTIONSET"
"VLA-GET-ACTIVESPACE"
"VLA-GET-ACTIVETEXTSTYLE"
"VLA-GET-ACTIVEUCS"
"VLA-GET-ACTIVEVIEWPORT"
"VLA-GET-ALIGNMENT"
"VLA-GET-ALIGNMENTPOINTACQUISITION"
"VLA-GET-ALLOWLONGSYMBOLNAMES"
"VLA-GET-ALTFONTFILE"
"VLA-GET-ALTROUNDDISTANCE"
"VLA-GET-ALTSUPPRESSLEADINGZEROS"
"VLA-GET-ALTSUPPRESSTRAILINGZEROS"
"VLA-GET-ALTSUPPRESSZEROFEET"
"VLA-GET-ALTSUPPRESSZEROINCHES"
"VLA-GET-ALTTABLETMENUFILE"
"VLA-GET-ALTTEXTPREFIX"
"VLA-GET-ALTTEXTSUFFIX"
"VLA-GET-ALTTOLERANCEPRECISION"
"VLA-GET-ALTTOLERANCESUPPRESSLEADINGZEROS"
"VLA-GET-ALTTOLERANCESUPPRESSTRAILINGZEROS"
"VLA-GET-ALTTOLERANCESUPPRESSZEROFEET"
"VLA-GET-ALTTOLERANCESUPPRESSZEROINCHES"
"VLA-GET-ALTUNITS"
"VLA-GET-ALTUNITSFORMAT"
"VLA-GET-ALTUNITSPRECISION"
"VLA-GET-ALTUNITSSCALE"
"VLA-GET-ANGLE"
"VLA-GET-ANGLEFORMAT"
"VLA-GET-ANGLEVERTEX"
"VLA-GET-ANNOTATION"
"VLA-GET-APPLICATION"
"VLA-GET-ARCLENGTH"
"VLA-GET-ARCSMOOTHNESS"
"VLA-GET-AREA"
"VLA-GET-ARROWHEAD1BLOCK"
"VLA-GET-ARROWHEAD1TYPE"
"VLA-GET-ARROWHEAD2BLOCK"
"VLA-GET-ARROWHEAD2TYPE"
"VLA-GET-ARROWHEADBLOCK"
"VLA-GET-ARROWHEADSIZE"
"VLA-GET-ARROWHEADTYPE"
"VLA-GET-ASSOCIATIVEHATCH"
"VLA-GET-ATTACHMENTPOINT"
"VLA-GET-AUTOAUDIT"
"VLA-GET-AUTOSAVEINTERVAL"
"VLA-GET-AUTOSAVEPATH"
"VLA-GET-AUTOSNAPAPERTURE"
"VLA-GET-AUTOSNAPAPERTURESIZE"
"VLA-GET-AUTOSNAPMAGNET"
"VLA-GET-AUTOSNAPMARKER"
"VLA-GET-AUTOSNAPMARKERCOLOR"
"VLA-GET-AUTOSNAPMARKERSIZE"
"VLA-GET-AUTOSNAPTOOLTIP"
"VLA-GET-AUTOTRACKINGVECCOLOR"
"VLA-GET-AUTOTRACKTOOLTIP"
"VLA-GET-BACKWARD"
"VLA-GET-BASEPOINT"
"VLA-GET-BATCHPLOTPROGRESS"
"VLA-GET-BEEPONERROR"
"VLA-GET-BIGFONTFILE"
"VLA-GET-BLOCK"
"VLA-GET-BLOCKS"
"VLA-GET-BRIGHTNESS"
"VLA-GET-CANONICALMEDIANAME"
"VLA-GET-CAPTION"
"VLA-GET-CEINSERTUNITS"
"VLA-GET-CEINSERTUNITSACTION"
"VLA-GET-CELOADPALETTE"
"VLA-GET-CENTER"
"VLA-GET-CENTERMARKSIZE"
"VLA-GET-CENTERPLOT"
"VLA-GET-CENTERTYPE"
"VLA-GET-CENTROID"
"VLA-GET-CHECK"
"VLA-GET-CIRCUMFERENCE"
"VLA-GET-CLIPPED"
"VLA-GET-CLIPPINGENABLED"
"VLA-GET-CLOSED"
"VLA-GET-COLOR"
"VLA-GET-COLUMNS"
"VLA-GET-COLUMNSPACING"
"VLA-GET-CONFIGFILE"
"VLA-GET-CONFIGNAME"
"VLA-GET-CONSTANT"
"VLA-GET-CONSTANTWIDTH"
"VLA-GET-CONTOURLINESPERSURFACE"
"VLA-GET-CONTRAST"
"VLA-GET-CONTROLPOINTS"
"VLA-GET-COORDINATE"
"VLA-GET-COORDINATES"
"VLA-GET-COUNT"
"VLA-GET-CREATEBACKUP"
"VLA-GET-CURSORSIZE"
"VLA-GET-CUSTOMDICTIONARY"
"VLA-GET-CUSTOMSCALE"
"VLA-GET-DATABASE"
"VLA-GET-DECIMALSEPARATOR"
"VLA-GET-DEFAULTINTERNETURL"
"VLA-GET-DEFAULTOUTPUTDEVICE"
"VLA-GET-DEFAULTPLOTSTYLEFORLAYERS"
"VLA-GET-DEFAULTPLOTSTYLEFOROBJECTS"
"VLA-GET-DEGREE"
"VLA-GET-DELTA"
"VLA-GET-DEMANDLOADARXAPP"
"VLA-GET-DESCRIPTION"
"VLA-GET-DIAMETER"
"VLA-GET-DICTIONARIES"
"VLA-GET-DIMENSIONLINECOLOR"
"VLA-GET-DIMENSIONLINEEXTEND"
"VLA-GET-DIMENSIONLINEWEIGHT"
"VLA-GET-DIMLINE1SUPPRESS"
"VLA-GET-DIMLINE2SUPPRESS"
"VLA-GET-DIMLINEINSIDE"
"VLA-GET-DIMLINESUPPRESS"
"VLA-GET-DIMSTYLES"
"VLA-GET-DIRECTION"
"VLA-GET-DIRECTIONVECTOR"
"VLA-GET-DISPLAY"
"VLA-GET-DISPLAYDRAGGEDOBJECT"
"VLA-GET-DISPLAYGRIPS"
"VLA-GET-DISPLAYGRIPSWITHINBLOCKS"
"VLA-GET-DISPLAYLAYOUTTABS"
"VLA-GET-DISPLAYLOCKED"
"VLA-GET-DISPLAYOLESCALE"
"VLA-GET-DISPLAYSCREENMENU"
"VLA-GET-DISPLAYSCROLLBARS"
"VLA-GET-DISPLAYSILHOUETTE"
"VLA-GET-DOCKEDVISIBLELINES"
"VLA-GET-DOCKSTATUS"
"VLA-GET-DOCUMENTS"
"VLA-GET-DRAFTING"
"VLA-GET-DRAWINGDIRECTION"
"VLA-GET-DRIVERSPATH"
"VLA-GET-ELEVATION"
"VLA-GET-ELEVATIONMODELSPACE"
"VLA-GET-ELEVATIONPAPERSPACE"
"VLA-GET-ENABLE"
"VLA-GET-ENABLESTARTUPDIALOG"
"VLA-GET-ENDANGLE"
"VLA-GET-ENDPARAMETER"
"VLA-GET-ENDPOINT"
"VLA-GET-ENDTANGENT"
"VLA-GET-EXTENSIONLINECOLOR"
"VLA-GET-EXTENSIONLINEEXTEND"
"VLA-GET-EXTENSIONLINEOFFSET"
"VLA-GET-EXTENSIONLINEWEIGHT"
"VLA-GET-EXTLINE1ENDPOINT"
"VLA-GET-EXTLINE1POINT"
"VLA-GET-EXTLINE1STARTPOINT"
"VLA-GET-EXTLINE1SUPPRESS"
"VLA-GET-EXTLINE2ENDPOINT"
"VLA-GET-EXTLINE2POINT"
"VLA-GET-EXTLINE2STARTPOINT"
"VLA-GET-EXTLINE2SUPPRESS"
"VLA-GET-FADE"
"VLA-GET-FIELDLENGTH"
"VLA-GET-FILES"
"VLA-GET-FIT"
"VLA-GET-FITPOINTS"
"VLA-GET-FITTOLERANCE"
"VLA-GET-FLOATINGROWS"
"VLA-GET-FLYOUT"
"VLA-GET-FONTFILE"
"VLA-GET-FONTFILEMAP"
"VLA-GET-FORCELINEINSIDE"
"VLA-GET-FRACTIONFORMAT"
"VLA-GET-FREEZE"
"VLA-GET-FULLCRCVALIDATION"
"VLA-GET-FULLNAME"
"VLA-GET-FULLSCREENTRACKINGVECTOR"
"VLA-GET-GRAPHICSWINLAYOUTBACKGRNDCOLOR"
"VLA-GET-GRAPHICSWINMODELBACKGRNDCOLOR"
"VLA-GET-GRIDON"
"VLA-GET-GRIPCOLORSELECTED"
"VLA-GET-GRIPCOLORUNSELECTED"
"VLA-GET-GRIPSIZE"
"VLA-GET-GROUPS"
"VLA-GET-HANDLE"
"VLA-GET-HASATTRIBUTES"
"VLA-GET-HASEXTENSIONDICTIONARY"
"VLA-GET-HATCHSTYLE"
"VLA-GET-HEIGHT"
"VLA-GET-HELPFILEPATH"
"VLA-GET-HELPSTRING"
"VLA-GET-HISTORYLINES"
"VLA-GET-HORIZONTALTEXTPOSITION"
"VLA-GET-HWND"
"VLA-GET-HYPERLINKDISPLAYCURSOR"
"VLA-GET-HYPERLINKDISPLAYTOOLTIP"
"VLA-GET-HYPERLINKS"
"VLA-GET-IMAGEFILE"
"VLA-GET-IMAGEFRAMEHIGHLIGHT"
"VLA-GET-IMAGEHEIGHT"
"VLA-GET-IMAGEVISIBILITY"
"VLA-GET-IMAGEWIDTH"
"VLA-GET-INCREMENTALSAVEPERCENT"
"VLA-GET-INDEX"
"VLA-GET-INSERTIONPOINT"
"VLA-GET-INVISIBLE"
"VLA-GET-ISLAYOUT"
"VLA-GET-ISOPENWIDTH"
"VLA-GET-ISPERIODIC"
"VLA-GET-ISPLANAR"
"VLA-GET-ISRATIONAL"
"VLA-GET-ISXREF"
"VLA-GET-KEYBOARDACCELERATOR"
"VLA-GET-KEYBOARDPRIORITY"
"VLA-GET-KNOTS"
"VLA-GET-LABEL"
"VLA-GET-LARGEBUTTONS"
"VLA-GET-LASTHEIGHT"
"VLA-GET-LAYER"
"VLA-GET-LAYERON"
"VLA-GET-LAYERS"
"VLA-GET-LAYOUT"
"VLA-GET-LAYOUTCREATEVIEWPORT"
"VLA-GET-LAYOUTCROSSHAIRCOLOR"
"VLA-GET-LAYOUTDISPLAYMARGINS"
"VLA-GET-LAYOUTDISPLAYPAPER"
"VLA-GET-LAYOUTDISPLAYPAPERSHADOW"
"VLA-GET-LAYOUTS"
"VLA-GET-LAYOUTSHOWPLOTSETUP"
"VLA-GET-LEADERLENGTH"
"VLA-GET-LEFT"
"VLA-GET-LEGACYSTYLESHEET"
"VLA-GET-LENGTH"
"VLA-GET-LENSLENGTH"
"VLA-GET-LICENSESERVER"
"VLA-GET-LIMITS"
"VLA-GET-LINEARSCALEFACTOR"
"VLA-GET-LINESPACINGFACTOR"
"VLA-GET-LINESPACINGSTYLE"
"VLA-GET-LINETYPE"
"VLA-GET-LINETYPEGENERATION"
"VLA-GET-LINETYPES"
"VLA-GET-LINETYPESCALE"
"VLA-GET-LINEWEIGHT"
"VLA-GET-LOCALEID"
"VLA-GET-LOCK"
"VLA-GET-LOGFILEON"
"VLA-GET-LOGFILEPATH"
"VLA-GET-LOWERLEFTCORNER"
"VLA-GET-MACRO"
"VLA-GET-MAINDICTIONARY"
"VLA-GET-MAJORAXIS"
"VLA-GET-MAJORRADIUS"
"VLA-GET-MAXACTIVEVIEWPORTS"
"VLA-GET-MAXAUTOCADWINDOW"
"VLA-GET-MAXNUMOFSYMBOLS"
"VLA-GET-MCLOSE"
"VLA-GET-MDENSITY"
"VLA-GET-MEASUREMENT"
"VLA-GET-MEASUREMENTUNITS"
"VLA-GET-MENUBAR"
"VLA-GET-MENUFILE"
"VLA-GET-MENUFILENAME"
"VLA-GET-MENUGROUPS"
"VLA-GET-MENUS"
"VLA-GET-MINORAXIS"
"VLA-GET-MINORRADIUS"
"VLA-GET-MODE"
"VLA-GET-MODELCROSSHAIRCOLOR"
"VLA-GET-MODELSPACE"
"VLA-GET-MODELTYPE"
"VLA-GET-MOMENTOFINERTIA"
"VLA-GET-MONOCHROMEVECTORS"
"VLA-GET-MRUNUMBER"
"VLA-GET-MSPACE"
"VLA-GET-MVERTEXCOUNT"
"VLA-GET-NAME"
"VLA-GET-NAMENOMNEMONIC"
"VLA-GET-NCLOSE"
"VLA-GET-NDENSITY"
"VLA-GET-NORMAL"
"VLA-GET-NUMBEROFCONTROLPOINTS"
"VLA-GET-NUMBEROFCOPIES"
"VLA-GET-NUMBEROFFACES"
"VLA-GET-NUMBEROFFITPOINTS"
"VLA-GET-NUMBEROFLOOPS"
"VLA-GET-NUMBEROFVERTICES"
"VLA-GET-NVERTEXCOUNT"
"VLA-GET-OBJECTARXPATH"
"VLA-GET-OBJECTID"
"VLA-GET-OBJECTNAME"
"VLA-GET-OBJECTSNAPMODE"
"VLA-GET-OBJECTSORTBYPLOTTING"
"VLA-GET-OBJECTSORTBYPSOUTPUT"
"VLA-GET-OBJECTSORTBYREDRAWS"
"VLA-GET-OBJECTSORTBYREGENS"
"VLA-GET-OBJECTSORTBYSELECTION"
"VLA-GET-OBJECTSORTBYSNAP"
"VLA-GET-OBLIQUEANGLE"
"VLA-GET-OLELAUNCH"
"VLA-GET-OLEQUALITY"
"VLA-GET-ONMENUBAR"
"VLA-GET-OPENSAVE"
"VLA-GET-ORIGIN"
"VLA-GET-ORTHOENABLED"
"VLA-GET-ORTHOON"
"VLA-GET-OUTPUT"
"VLA-GET-PAPERSPACE"
"VLA-GET-PAPERUNITS"
"VLA-GET-PARENT"
"VLA-GET-PATH"
"VLA-GET-PATTERNANGLE"
"VLA-GET-PATTERNDOUBLE"
"VLA-GET-PATTERNNAME"
"VLA-GET-PATTERNSCALE"
"VLA-GET-PATTERNSPACE"
"VLA-GET-PATTERNTYPE"
"VLA-GET-PERIMETER"
"VLA-GET-PICKADD"
"VLA-GET-PICKAUTO"
"VLA-GET-PICKBOXSIZE"
"VLA-GET-PICKDRAG"
"VLA-GET-PICKFIRST"
"VLA-GET-PICKFIRSTSELECTIONSET"
"VLA-GET-PICKGROUP"
"VLA-GET-PLOT"
"VLA-GET-PLOTCONFIGURATIONS"
"VLA-GET-PLOTHIDDEN"
"VLA-GET-PLOTLEGACY"
"VLA-GET-PLOTORIGIN"
"VLA-GET-PLOTPOLICYFORLEGACYDWGS"
"VLA-GET-PLOTPOLICYFORNEWDWGS"
"VLA-GET-PLOTROTATION"
"VLA-GET-PLOTSTYLENAME"
"VLA-GET-PLOTSTYLESHEET"
"VLA-GET-PLOTTABLE"
"VLA-GET-PLOTTYPE"
"VLA-GET-PLOTVIEWPORTBORDERS"
"VLA-GET-PLOTVIEWPORTSFIRST"
"VLA-GET-PLOTWITHLINEWEIGHTS"
"VLA-GET-PLOTWITHPLOTSTYLES"
"VLA-GET-POLARTRACKINGVECTOR"
"VLA-GET-POSTSCRIPTPROLOGFILE"
"VLA-GET-PREFERENCES"
"VLA-GET-PRESET"
"VLA-GET-PRIMARYUNITSPRECISION"
"VLA-GET-PRINCIPALDIRECTIONS"
"VLA-GET-PRINCIPALMOMENTS"
"VLA-GET-PRINTERCONFIGPATH"
"VLA-GET-PRINTERDESCPATH"
"VLA-GET-PRINTERPAPERSIZEALERT"
"VLA-GET-PRINTERSPOOLALERT"
"VLA-GET-PRINTERSTYLESHEETPATH"
"VLA-GET-PRINTFILE"
"VLA-GET-PRINTSPOOLERPATH"
"VLA-GET-PRINTSPOOLEXECUTABLE"
"VLA-GET-PRODUCTOFINERTIA"
"VLA-GET-PROFILES"
"VLA-GET-PROMPTSTRING"
"VLA-GET-PROXYIMAGE"
"VLA-GET-QUIETERRORMODE"
"VLA-GET-RADIIOFGYRATION"
"VLA-GET-RADIUS"
"VLA-GET-RADIUSRATIO"
"VLA-GET-READONLY"
"VLA-GET-REGISTEREDAPPLICATIONS"
"VLA-GET-REMOVEHIDDENLINES"
"VLA-GET-RENDERSMOOTHNESS"
"VLA-GET-ROTATION"
"VLA-GET-ROUNDDISTANCE"
"VLA-GET-ROWS"
"VLA-GET-ROWSPACING"
"VLA-GET-SAVEASTYPE"
"VLA-GET-SAVED"
"VLA-GET-SAVEPREVIEWTHUMBNAIL"
"VLA-GET-SCALEFACTOR"
"VLA-GET-SCALELINEWEIGHTS"
"VLA-GET-SECONDPOINT"
"VLA-GET-SEGMENTPERPOLYLINE"
"VLA-GET-SELECTION"
"VLA-GET-SELECTIONSETS"
"VLA-GET-SHORTCUTMENU"
"VLA-GET-SHOWPLOTSTYLES"
"VLA-GET-SHOWPROXYDIALOGBOX"
"VLA-GET-SHOWRASTERIMAGE"
"VLA-GET-SHOWWARNINGMESSAGES"
"VLA-GET-SINGLEDOCUMENTMODE"
"VLA-GET-SNAPBASEPOINT"
"VLA-GET-SNAPON"
"VLA-GET-SNAPROTATIONANGLE"
"VLA-GET-SOLIDCHECK"
"VLA-GET-SOLIDFILL"
"VLA-GET-STANDARDSCALE"
"VLA-GET-STARTANGLE"
"VLA-GET-STARTPARAMETER"
"VLA-GET-STARTPOINT"
"VLA-GET-STARTTANGENT"
"VLA-GET-STATUSID"
"VLA-GET-STORESQLINDEX"
"VLA-GET-STYLENAME"
"VLA-GET-STYLESHEET"
"VLA-GET-SUBMENU"
"VLA-GET-SUPPORTPATH"
"VLA-GET-SUPPRESSLEADINGZEROS"
"VLA-GET-SUPPRESSTRAILINGZEROS"
"VLA-GET-SUPPRESSZEROFEET"
"VLA-GET-SUPPRESSZEROINCHES"
"VLA-GET-SYSTEM"
"VLA-GET-TABLESREADONLY"
"VLA-GET-TABORDER"
"VLA-GET-TAGSTRING"
"VLA-GET-TARGET"
"VLA-GET-TEMPFILEEXTENSION"
"VLA-GET-TEMPFILEPATH"
"VLA-GET-TEMPLATEDWGPATH"
"VLA-GET-TEMPXREFPATH"
"VLA-GET-TEXTALIGNMENTPOINT"
"VLA-GET-TEXTCOLOR"
"VLA-GET-TEXTEDITOR"
"VLA-GET-TEXTFONT"
"VLA-GET-TEXTFONTSIZE"
"VLA-GET-TEXTFONTSTYLE"
"VLA-GET-TEXTFRAMEDISPLAY"
"VLA-GET-TEXTGAP"
"VLA-GET-TEXTGENERATIONFLAG"
"VLA-GET-TEXTHEIGHT"
"VLA-GET-TEXTINSIDE"
"VLA-GET-TEXTINSIDEALIGN"
"VLA-GET-TEXTMOVEMENT"
"VLA-GET-TEXTOUTSIDEALIGN"
"VLA-GET-TEXTOVERRIDE"
"VLA-GET-TEXTPOSITION"
"VLA-GET-TEXTPRECISION"
"VLA-GET-TEXTPREFIX"
"VLA-GET-TEXTROTATION"
"VLA-GET-TEXTSTRING"
"VLA-GET-TEXTSTYLE"
"VLA-GET-TEXTSTYLES"
"VLA-GET-TEXTSUFFIX"
"VLA-GET-TEXTUREMAPPATH"
"VLA-GET-TEXTWINBACKGRNDCOLOR"
"VLA-GET-TEXTWINTEXTCOLOR"
"VLA-GET-THICKNESS"
"VLA-GET-TOLERANCEDISPLAY"
"VLA-GET-TOLERANCEHEIGHTSCALE"
"VLA-GET-TOLERANCEJUSTIFICATION"
"VLA-GET-TOLERANCELOWERLIMIT"
"VLA-GET-TOLERANCEPRECISION"
"VLA-GET-TOLERANCESUPPRESSLEADINGZEROS"
"VLA-GET-TOLERANCESUPPRESSTRAILINGZEROS"
"VLA-GET-TOLERANCESUPPRESSZEROFEET"
"VLA-GET-TOLERANCESUPPRESSZEROINCHES"
"VLA-GET-TOLERANCEUPPERLIMIT"
"VLA-GET-TOOLBARS"
"VLA-GET-TOP"
"VLA-GET-TOTALANGLE"
"VLA-GET-TRANSLATEIDS"
"VLA-GET-TRANSPARENCY"
"VLA-GET-TRUECOLORIMAGES"
"VLA-GET-TWISTANGLE"
"VLA-GET-TYPE"
"VLA-GET-UCSICONATORIGIN"
"VLA-GET-UCSICONON"
"VLA-GET-UCSPERVIEWPORT"
"VLA-GET-UNITSFORMAT"
"VLA-GET-UPPERRIGHTCORNER"
"VLA-GET-UPSIDEDOWN"
"VLA-GET-URL"
"VLA-GET-URLDESCRIPTION"
"VLA-GET-USER"
"VLA-GET-USERCOORDINATESYSTEMS"
"VLA-GET-USESTANDARDSCALE"
"VLA-GET-UTILITY"
"VLA-GET-VBE"
"VLA-GET-VERIFY"
"VLA-GET-VERSION"
"VLA-GET-VERTICALTEXTPOSITION"
"VLA-GET-VIEWPORTDEFAULT"
"VLA-GET-VIEWPORTON"
"VLA-GET-VIEWPORTS"
"VLA-GET-VIEWS"
"VLA-GET-VIEWTOPLOT"
"VLA-GET-VISIBILITYEDGE1"
"VLA-GET-VISIBILITYEDGE2"
"VLA-GET-VISIBILITYEDGE3"
"VLA-GET-VISIBILITYEDGE4"
"VLA-GET-VISIBLE"
"VLA-GET-VOLUME"
"VLA-GET-WEIGHTS"
"VLA-GET-WIDTH"
"VLA-GET-WINDOWSTATE"
"VLA-GET-WINDOWTITLE"
"VLA-GET-WORKSPACEPATH"
"VLA-GET-XREFDATABASE"
"VLA-GET-XREFDEMANDLOAD"
"VLA-GET-XREFEDIT"
"VLA-GET-XREFFADEINTENSITY"
"VLA-GET-XREFLAYERVISIBILITY"
"VLA-GET-XSCALEFACTOR"
"VLA-GET-XVECTOR"
"VLA-GET-YSCALEFACTOR"
"VLA-GET-YVECTOR"
"VLA-GET-ZSCALEFACTOR"
"VLA-GETANGLE"
"VLA-GETATTRIBUTES"
"VLA-GETBITMAPS"
"VLA-GETBOUNDINGBOX"
"VLA-GETBULGE"
"VLA-GETCONSTANTATTRIBUTES"
"VLA-GETCONTROLPOINT"
"VLA-GETCORNER"
"VLA-GETCUSTOMSCALE"
"VLA-GETDISTANCE"
"VLA-GETENTITY"
"VLA-GETEXTENSIONDICTIONARY"
"VLA-GETFITPOINT"
"VLA-GETFONT"
"VLA-GETGRIDSPACING"
"VLA-GETINPUT"
"VLA-GETINTEGER"
"VLA-GETINTERFACEOBJECT"
"VLA-GETINVISIBLEEDGE"
"VLA-GETKEYWORD"
"VLA-GETLOOPAT"
"VLA-GETNAME"
"VLA-GETOBJECT"
"VLA-GETORIENTATION"
"VLA-GETPAPERMARGINS"
"VLA-GETPAPERSIZE"
"VLA-GETPOINT"
"VLA-GETPROJECTFILEPATH"
"VLA-GETREAL"
"VLA-GETSNAPSPACING"
"VLA-GETSTRING"
"VLA-GETSUBENTITY"
"VLA-GETUCSMATRIX"
"VLA-GETVARIABLE"
"VLA-GETWEIGHT"
"VLA-GETWIDTH"
"VLA-GETWINDOWTOPLOT"
"VLA-GETXDATA"
"VLA-GETXRECORDDATA"
"VLA-HANDLETOOBJECT"
"VLA-HIGHLIGHT"
"VLA-IMPORT"
"VLA-IMPORTPROFILE"
"VLA-INITIALIZEUSERINPUT"
"VLA-INSERTBLOCK"
"VLA-INSERTINMENUBAR"
"VLA-INSERTLOOPAT"
"VLA-INSERTMENUINMENUBAR"
"VLA-INTERSECTWITH"
"VLA-ITEM"
"VLA-LISTADS"
"VLA-LISTARX"
"VLA-LOAD"
"VLA-LOADADS"
"VLA-LOADARX"
"VLA-LOADDVB"
"VLA-LOADSHAPEFILE"
"VLA-MIRROR"
"VLA-MIRROR3D"
"VLA-MODIFIED"
"VLA-MOVE"
"VLA-NEW"
"VLA-OBJECTIDTOOBJECT"
"VLA-OFFSET"
"VLA-OPEN"
"VLA-PLOTTODEVICE"
"VLA-PLOTTOFILE"
"VLA-POLARPOINT"
"VLA-PROMPT"
"VLA-PURGEALL"
"VLA-PURGEFITDATA"
-
"VLA-PUT-ACTIVEDIMSTYLE"
"VLA-PUT-ACTIVEDOCUMENT"
"VLA-PUT-ACTIVELAYER"
"VLA-PUT-ACTIVELAYOUT"
"VLA-PUT-ACTIVELINETYPE"
"VLA-PUT-ACTIVEPROFILE"
"VLA-PUT-ACTIVEPVIEWPORT"
"VLA-PUT-ACTIVESPACE"
"VLA-PUT-ACTIVETEXTSTYLE"
"VLA-PUT-ACTIVEUCS"
"VLA-PUT-ACTIVEVIEWPORT"
"VLA-PUT-ALIGNMENT"
"VLA-PUT-ALIGNMENTPOINTACQUISITION"
"VLA-PUT-ALLOWLONGSYMBOLNAMES"
"VLA-PUT-ALTFONTFILE"
"VLA-PUT-ALTROUNDDISTANCE"
"VLA-PUT-ALTSUPPRESSLEADINGZEROS"
"VLA-PUT-ALTSUPPRESSTRAILINGZEROS"
"VLA-PUT-ALTSUPPRESSZEROFEET"
"VLA-PUT-ALTSUPPRESSZEROINCHES"
"VLA-PUT-ALTTABLETMENUFILE"
"VLA-PUT-ALTTEXTPREFIX"
"VLA-PUT-ALTTEXTSUFFIX"
"VLA-PUT-ALTTOLERANCEPRECISION"
"VLA-PUT-ALTTOLERANCESUPPRESSLEADINGZEROS"
"VLA-PUT-ALTTOLERANCESUPPRESSTRAILINGZEROS"
"VLA-PUT-ALTTOLERANCESUPPRESSZEROFEET"
"VLA-PUT-ALTTOLERANCESUPPRESSZEROINCHES"
"VLA-PUT-ALTUNITS"
"VLA-PUT-ALTUNITSFORMAT"
"VLA-PUT-ALTUNITSPRECISION"
"VLA-PUT-ALTUNITSSCALE"
"VLA-PUT-ANGLEFORMAT"
"VLA-PUT-ANGLEVERTEX"
"VLA-PUT-ANNOTATION"
"VLA-PUT-ARCSMOOTHNESS"
"VLA-PUT-AREA"
"VLA-PUT-ARROWHEAD1BLOCK"
"VLA-PUT-ARROWHEAD1TYPE"
"VLA-PUT-ARROWHEAD2BLOCK"
"VLA-PUT-ARROWHEAD2TYPE"
"VLA-PUT-ARROWHEADBLOCK"
"VLA-PUT-ARROWHEADSIZE"
"VLA-PUT-ARROWHEADTYPE"
"VLA-PUT-ASSOCIATIVEHATCH"
"VLA-PUT-ATTACHMENTPOINT"
"VLA-PUT-AUTOAUDIT"
"VLA-PUT-AUTOSAVEINTERVAL"
"VLA-PUT-AUTOSAVEPATH"
"VLA-PUT-AUTOSNAPAPERTURE"
"VLA-PUT-AUTOSNAPAPERTURESIZE"
"VLA-PUT-AUTOSNAPMAGNET"
"VLA-PUT-AUTOSNAPMARKER"
"VLA-PUT-AUTOSNAPMARKERCOLOR"
"VLA-PUT-AUTOSNAPMARKERSIZE"
"VLA-PUT-AUTOSNAPTOOLTIP"
"VLA-PUT-AUTOTRACKINGVECCOLOR"
"VLA-PUT-AUTOTRACKTOOLTIP"
"VLA-PUT-BACKWARD"
"VLA-PUT-BASEPOINT"
"VLA-PUT-BATCHPLOTPROGRESS"
"VLA-PUT-BEEPONERROR"
"VLA-PUT-BIGFONTFILE"
"VLA-PUT-BRIGHTNESS"
"VLA-PUT-CANONICALMEDIANAME"
"VLA-PUT-CEINSERTUNITS"
"VLA-PUT-CEINSERTUNITSACTION"
"VLA-PUT-CELOADPALETTE"
"VLA-PUT-CENTER"
"VLA-PUT-CENTERMARKSIZE"
"VLA-PUT-CENTERPLOT"
"VLA-PUT-CENTERTYPE"
"VLA-PUT-CHECK"
"VLA-PUT-CIRCUMFERENCE"
"VLA-PUT-CLIPPINGENABLED"
"VLA-PUT-CLOSED"
"VLA-PUT-COLOR"
"VLA-PUT-COLUMNS"
"VLA-PUT-COLUMNSPACING"
"VLA-PUT-CONFIGNAME"
"VLA-PUT-CONSTANT"
"VLA-PUT-CONSTANTWIDTH"
"VLA-PUT-CONTOURLINESPERSURFACE"
"VLA-PUT-CONTRAST"
"VLA-PUT-CONTROLPOINTS"
"VLA-PUT-COORDINATE"
"VLA-PUT-COORDINATES"
"VLA-PUT-CREATEBACKUP"
"VLA-PUT-CURSORSIZE"
"VLA-PUT-CUSTOMDICTIONARY"
"VLA-PUT-CUSTOMSCALE"
"VLA-PUT-DECIMALSEPARATOR"
"VLA-PUT-DEFAULTINTERNETURL"
"VLA-PUT-DEFAULTOUTPUTDEVICE"
"VLA-PUT-DEFAULTPLOTSTYLEFORLAYERS"
"VLA-PUT-DEFAULTPLOTSTYLEFOROBJECTS"
"VLA-PUT-DEMANDLOADARXAPP"
"VLA-PUT-DESCRIPTION"
"VLA-PUT-DIAMETER"
"VLA-PUT-DIMENSIONLINECOLOR"
"VLA-PUT-DIMENSIONLINEEXTEND"
"VLA-PUT-DIMENSIONLINEWEIGHT"
"VLA-PUT-DIMLINE1SUPPRESS"
"VLA-PUT-DIMLINE2SUPPRESS"
"VLA-PUT-DIMLINEINSIDE"
"VLA-PUT-DIMLINESUPPRESS"
"VLA-PUT-DIRECTION"
"VLA-PUT-DIRECTIONVECTOR"
"VLA-PUT-DISPLAYDRAGGEDOBJECT"
"VLA-PUT-DISPLAYGRIPS"
"VLA-PUT-DISPLAYGRIPSWITHINBLOCKS"
"VLA-PUT-DISPLAYLAYOUTTABS"
"VLA-PUT-DISPLAYLOCKED"
"VLA-PUT-DISPLAYOLESCALE"
"VLA-PUT-DISPLAYSCREENMENU"
"VLA-PUT-DISPLAYSCROLLBARS"
"VLA-PUT-DISPLAYSILHOUETTE"
"VLA-PUT-DOCKEDVISIBLELINES"
"VLA-PUT-DRAWINGDIRECTION"
"VLA-PUT-DRIVERSPATH"
"VLA-PUT-ELEVATION"
"VLA-PUT-ELEVATIONMODELSPACE"
"VLA-PUT-ELEVATIONPAPERSPACE"
"VLA-PUT-ENABLE"
"VLA-PUT-ENABLESTARTUPDIALOG"
"VLA-PUT-ENDANGLE"
"VLA-PUT-ENDPARAMETER"
"VLA-PUT-ENDPOINT"
"VLA-PUT-ENDTANGENT"
"VLA-PUT-EXTENSIONLINECOLOR"
"VLA-PUT-EXTENSIONLINEEXTEND"
"VLA-PUT-EXTENSIONLINEOFFSET"
"VLA-PUT-EXTENSIONLINEWEIGHT"
"VLA-PUT-EXTLINE1ENDPOINT"
"VLA-PUT-EXTLINE1POINT"
"VLA-PUT-EXTLINE1STARTPOINT"
"VLA-PUT-EXTLINE1SUPPRESS"
"VLA-PUT-EXTLINE2ENDPOINT"
"VLA-PUT-EXTLINE2POINT"
"VLA-PUT-EXTLINE2STARTPOINT"
"VLA-PUT-EXTLINE2SUPPRESS"
"VLA-PUT-FADE"
"VLA-PUT-FIELDLENGTH"
"VLA-PUT-FIT"
"VLA-PUT-FITPOINTS"
"VLA-PUT-FITTOLERANCE"
"VLA-PUT-FLOATINGROWS"
"VLA-PUT-FONTFILE"
"VLA-PUT-FONTFILEMAP"
"VLA-PUT-FORCELINEINSIDE"
"VLA-PUT-FRACTIONFORMAT"
"VLA-PUT-FREEZE"
"VLA-PUT-FULLCRCVALIDATION"
"VLA-PUT-FULLSCREENTRACKINGVECTOR"
"VLA-PUT-GRAPHICSWINLAYOUTBACKGRNDCOLOR"
"VLA-PUT-GRAPHICSWINMODELBACKGRNDCOLOR"
"VLA-PUT-GRIDON"
"VLA-PUT-GRIPCOLORSELECTED"
"VLA-PUT-GRIPCOLORUNSELECTED"
"VLA-PUT-GRIPSIZE"
"VLA-PUT-HATCHSTYLE"
"VLA-PUT-HEIGHT"
"VLA-PUT-HELPFILEPATH"
"VLA-PUT-HELPSTRING"
"VLA-PUT-HISTORYLINES"
"VLA-PUT-HORIZONTALTEXTPOSITION"
"VLA-PUT-HYPERLINKDISPLAYCURSOR"
"VLA-PUT-HYPERLINKDISPLAYTOOLTIP"
"VLA-PUT-IMAGEFILE"
"VLA-PUT-IMAGEFRAMEHIGHLIGHT"
"VLA-PUT-IMAGEHEIGHT"
"VLA-PUT-IMAGEVISIBILITY"
"VLA-PUT-IMAGEWIDTH"
"VLA-PUT-INCREMENTALSAVEPERCENT"
"VLA-PUT-INSERTIONPOINT"
"VLA-PUT-INVISIBLE"
"VLA-PUT-ISOPENWIDTH"
"VLA-PUT-KEYBOARDACCELERATOR"
"VLA-PUT-KEYBOARDPRIORITY"
"VLA-PUT-KNOTS"
"VLA-PUT-LABEL"
"VLA-PUT-LARGEBUTTONS"
"VLA-PUT-LASTHEIGHT"
"VLA-PUT-LAYER"
"VLA-PUT-LAYERON"
"VLA-PUT-LAYOUTCREATEVIEWPORT"
"VLA-PUT-LAYOUTCROSSHAIRCOLOR"
"VLA-PUT-LAYOUTDISPLAYMARGINS"
"VLA-PUT-LAYOUTDISPLAYPAPER"
"VLA-PUT-LAYOUTDISPLAYPAPERSHADOW"
"VLA-PUT-LAYOUTSHOWPLOTSETUP"
"VLA-PUT-LEADERLENGTH"
"VLA-PUT-LEFT"
"VLA-PUT-LEGACYSTYLESHEET"
"VLA-PUT-LENSLENGTH"
"VLA-PUT-LIMITS"
"VLA-PUT-LINEARSCALEFACTOR"
"VLA-PUT-LINESPACINGFACTOR"
"VLA-PUT-LINESPACINGSTYLE"
"VLA-PUT-LINETYPE"
"VLA-PUT-LINETYPEGENERATION"
"VLA-PUT-LINETYPESCALE"
"VLA-PUT-LINEWEIGHT"
"VLA-PUT-LOCK"
"VLA-PUT-LOGFILEON"
"VLA-PUT-LOGFILEPATH"
"VLA-PUT-MACRO"
"VLA-PUT-MAINDICTIONARY"
"VLA-PUT-MAJORAXIS"
"VLA-PUT-MAJORRADIUS"
"VLA-PUT-MAXACTIVEVIEWPORTS"
"VLA-PUT-MAXAUTOCADWINDOW"
"VLA-PUT-MAXNUMOFSYMBOLS"
"VLA-PUT-MCLOSE"
"VLA-PUT-MDENSITY"
"VLA-PUT-MEASUREMENTUNITS"
"VLA-PUT-MENUFILE"
"VLA-PUT-MINORRADIUS"
"VLA-PUT-MODE"
"VLA-PUT-MODELCROSSHAIRCOLOR"
"VLA-PUT-MODELTYPE"
"VLA-PUT-MONOCHROMEVECTORS"
"VLA-PUT-MRUNUMBER"
"VLA-PUT-MSPACE"
"VLA-PUT-NAME"
"VLA-PUT-NCLOSE"
"VLA-PUT-NDENSITY"
"VLA-PUT-NORMAL"
"VLA-PUT-NUMBEROFCOPIES"
"VLA-PUT-OBJECTARXPATH"
"VLA-PUT-OBJECTSNAPMODE"
"VLA-PUT-OBJECTSORTBYPLOTTING"
"VLA-PUT-OBJECTSORTBYPSOUTPUT"
"VLA-PUT-OBJECTSORTBYREDRAWS"
"VLA-PUT-OBJECTSORTBYREGENS"
"VLA-PUT-OBJECTSORTBYSELECTION"
"VLA-PUT-OBJECTSORTBYSNAP"
"VLA-PUT-OBLIQUEANGLE"
"VLA-PUT-OLELAUNCH"
"VLA-PUT-OLEQUALITY"
"VLA-PUT-ORIGIN"
"VLA-PUT-ORTHOENABLED"
"VLA-PUT-ORTHOON"
"VLA-PUT-PAPERUNITS"
"VLA-PUT-PATH"
"VLA-PUT-PATTERNANGLE"
"VLA-PUT-PATTERNDOUBLE"
"VLA-PUT-PATTERNSCALE"
"VLA-PUT-PATTERNSPACE"
"VLA-PUT-PICKADD"
"VLA-PUT-PICKAUTO"
"VLA-PUT-PICKBOXSIZE"
"VLA-PUT-PICKDRAG"
"VLA-PUT-PICKFIRST"
"VLA-PUT-PICKGROUP"
"VLA-PUT-PLOTHIDDEN"
"VLA-PUT-PLOTLEGACY"
"VLA-PUT-PLOTORIGIN"
"VLA-PUT-PLOTPOLICYFORLEGACYDWGS"
"VLA-PUT-PLOTPOLICYFORNEWDWGS"
"VLA-PUT-PLOTROTATION"
"VLA-PUT-PLOTSTYLENAME"
"VLA-PUT-PLOTSTYLESHEET"
"VLA-PUT-PLOTTABLE"
"VLA-PUT-PLOTTYPE"
"VLA-PUT-PLOTVIEWPORTBORDERS"
"VLA-PUT-PLOTVIEWPORTSFIRST"
"VLA-PUT-PLOTWITHLINEWEIGHTS"
"VLA-PUT-PLOTWITHPLOTSTYLES"
"VLA-PUT-POLARTRACKINGVECTOR"
"VLA-PUT-POSTSCRIPTPROLOGFILE"
"VLA-PUT-PRESET"
"VLA-PUT-PRIMARYUNITSPRECISION"
"VLA-PUT-PRINTERCONFIGPATH"
"VLA-PUT-PRINTERDESCPATH"
"VLA-PUT-PRINTERPAPERSIZEALERT"
"VLA-PUT-PRINTERSPOOLALERT"
"VLA-PUT-PRINTERSTYLESHEETPATH"
"VLA-PUT-PRINTFILE"
"VLA-PUT-PRINTSPOOLERPATH"
"VLA-PUT-PRINTSPOOLEXECUTABLE"
"VLA-PUT-PROMPTSTRING"
"VLA-PUT-PROXYIMAGE"
"VLA-PUT-QUIETERRORMODE"
"VLA-PUT-RADIUS"
"VLA-PUT-RADIUSRATIO"
"VLA-PUT-REMOVEHIDDENLINES"
"VLA-PUT-RENDERSMOOTHNESS"
"VLA-PUT-ROTATION"
"VLA-PUT-ROUNDDISTANCE"
"VLA-PUT-ROWS"
"VLA-PUT-ROWSPACING"
"VLA-PUT-SAVEASTYPE"
"VLA-PUT-SAVEPREVIEWTHUMBNAIL"
"VLA-PUT-SCALEFACTOR"
"VLA-PUT-SCALELINEWEIGHTS"
"VLA-PUT-SECONDPOINT"
"VLA-PUT-SEGMENTPERPOLYLINE"
"VLA-PUT-SHOWPLOTSTYLES"
"VLA-PUT-SHOWPROXYDIALOGBOX"
"VLA-PUT-SHOWRASTERIMAGE"
"VLA-PUT-SHOWWARNINGMESSAGES"
"VLA-PUT-SINGLEDOCUMENTMODE"
"VLA-PUT-SNAPBASEPOINT"
"VLA-PUT-SNAPON"
"VLA-PUT-SNAPROTATIONANGLE"
"VLA-PUT-SOLIDCHECK"
"VLA-PUT-SOLIDFILL"
"VLA-PUT-STANDARDSCALE"
"VLA-PUT-STARTANGLE"
"VLA-PUT-STARTPARAMETER"
"VLA-PUT-STARTPOINT"
"VLA-PUT-STARTTANGENT"
"VLA-PUT-STORESQLINDEX"
"VLA-PUT-STYLENAME"
"VLA-PUT-STYLESHEET"
"VLA-PUT-SUPPORTPATH"
"VLA-PUT-SUPPRESSLEADINGZEROS"
"VLA-PUT-SUPPRESSTRAILINGZEROS"
"VLA-PUT-SUPPRESSZEROFEET"
"VLA-PUT-SUPPRESSZEROINCHES"
"VLA-PUT-TABLESREADONLY"
"VLA-PUT-TABORDER"
"VLA-PUT-TAGSTRING"
"VLA-PUT-TARGET"
"VLA-PUT-TEMPFILEEXTENSION"
"VLA-PUT-TEMPFILEPATH"
"VLA-PUT-TEMPLATEDWGPATH"
"VLA-PUT-TEMPXREFPATH"
"VLA-PUT-TEXTALIGNMENTPOINT"
"VLA-PUT-TEXTCOLOR"
"VLA-PUT-TEXTEDITOR"
"VLA-PUT-TEXTFONT"
"VLA-PUT-TEXTFONTSIZE"
"VLA-PUT-TEXTFONTSTYLE"
"VLA-PUT-TEXTFRAMEDISPLAY"
"VLA-PUT-TEXTGAP"
"VLA-PUT-TEXTGENERATIONFLAG"
"VLA-PUT-TEXTHEIGHT"
"VLA-PUT-TEXTINSIDE"
"VLA-PUT-TEXTINSIDEALIGN"
"VLA-PUT-TEXTMOVEMENT"
"VLA-PUT-TEXTOUTSIDEALIGN"
"VLA-PUT-TEXTOVERRIDE"
"VLA-PUT-TEXTPOSITION"
"VLA-PUT-TEXTPRECISION"
"VLA-PUT-TEXTPREFIX"
"VLA-PUT-TEXTROTATION"
"VLA-PUT-TEXTSTRING"
"VLA-PUT-TEXTSTYLE"
"VLA-PUT-TEXTSUFFIX"
"VLA-PUT-TEXTUREMAPPATH"
"VLA-PUT-TEXTWINBACKGRNDCOLOR"
"VLA-PUT-TEXTWINTEXTCOLOR"
"VLA-PUT-THICKNESS"
"VLA-PUT-TOLERANCEDISPLAY"
"VLA-PUT-TOLERANCEHEIGHTSCALE"
"VLA-PUT-TOLERANCEJUSTIFICATION"
"VLA-PUT-TOLERANCELOWERLIMIT"
"VLA-PUT-TOLERANCEPRECISION"
"VLA-PUT-TOLERANCESUPPRESSLEADINGZEROS"
"VLA-PUT-TOLERANCESUPPRESSTRAILINGZEROS"
"VLA-PUT-TOLERANCESUPPRESSZEROFEET"
"VLA-PUT-TOLERANCESUPPRESSZEROINCHES"
"VLA-PUT-TOLERANCEUPPERLIMIT"
"VLA-PUT-TOP"
"VLA-PUT-TRANSLATEIDS"
"VLA-PUT-TRANSPARENCY"
"VLA-PUT-TRUECOLORIMAGES"
"VLA-PUT-TWISTANGLE"
"VLA-PUT-TYPE"
"VLA-PUT-UCSICONATORIGIN"
"VLA-PUT-UCSICONON"
"VLA-PUT-UCSPERVIEWPORT"
"VLA-PUT-UNITSFORMAT"
"VLA-PUT-UPSIDEDOWN"
"VLA-PUT-URL"
"VLA-PUT-URLDESCRIPTION"
"VLA-PUT-USESTANDARDSCALE"
"VLA-PUT-VERIFY"
"VLA-PUT-VERTICALTEXTPOSITION"
"VLA-PUT-VIEWPORTDEFAULT"
"VLA-PUT-VIEWPORTON"
"VLA-PUT-VIEWTOPLOT"
"VLA-PUT-VISIBILITYEDGE1"
"VLA-PUT-VISIBILITYEDGE2"
"VLA-PUT-VISIBILITYEDGE3"
"VLA-PUT-VISIBILITYEDGE4"
"VLA-PUT-VISIBLE"
"VLA-PUT-WEIGHTS"
"VLA-PUT-WIDTH"
"VLA-PUT-WINDOWSTATE"
"VLA-PUT-WORKSPACEPATH"
"VLA-PUT-XREFDEMANDLOAD"
"VLA-PUT-XREFEDIT"
"VLA-PUT-XREFFADEINTENSITY"
"VLA-PUT-XREFLAYERVISIBILITY"
"VLA-PUT-XSCALEFACTOR"
"VLA-PUT-XVECTOR"
"VLA-PUT-YSCALEFACTOR"
"VLA-PUT-YVECTOR"
"VLA-PUT-ZSCALEFACTOR"
"VLA-QUIT"
"VLA-REALTOSTRING"
"VLA-REGEN"
"VLA-RELOAD"
"VLA-REMOVE"
"VLA-REMOVEFROMMENUBAR"
"VLA-REMOVEITEMS"
"VLA-REMOVEMENUFROMMENUBAR"
"VLA-RENAME"
"VLA-REPLACE"
"VLA-RESETPROFILE"
"VLA-REVERSE"
"VLA-ROTATE"
"VLA-ROTATE3D"
"VLA-RUNMACRO"
"VLA-SAVE"
"VLA-SAVEAS"
"VLA-SCALEENTITY"
"VLA-SECTIONSOLID"
"VLA-SELECT"
"VLA-SELECTATPOINT"
"VLA-SELECTBYPOLYGON"
"VLA-SELECTONSCREEN"
"VLA-SENDCOMMAND"
"VLA-SETBITMAPS"
"VLA-SETBULGE"
"VLA-SETCONTROLPOINT"
"VLA-SETCUSTOMSCALE"
"VLA-SETFITPOINT"
"VLA-SETFONT"
"VLA-SETGRIDSPACING"
"VLA-SETINVISIBLEEDGE"
"VLA-SETLAYOUTSTOPLOT"
"VLA-SETPATTERN"
"VLA-SETPROJECTFILEPATH"
"VLA-SETSNAPSPACING"
"VLA-SETVARIABLE"
"VLA-SETVIEW"
"VLA-SETWEIGHT"
"VLA-SETWIDTH"
"VLA-SETWINDOWTOPLOT"
"VLA-SETXDATA"
"VLA-SETXRECORDDATA"
"VLA-SLICESOLID"
"VLA-SPLIT"
"VLA-STARTBATCHMODE"
"VLA-STARTUNDOMARK"
"VLA-TRANSFORMBY"
"VLA-TRANSLATECOORDINATES"
"VLA-UNLOAD"
"VLA-UNLOADADS"
"VLA-UNLOADARX"
"VLA-UNLOADDVB"
"VLA-UPDATE"
"VLA-WBLOCK"
"VLA-ZOOMALL"
"VLA-ZOOMCENTER"
"VLA-ZOOMEXTENTS"
"VLA-ZOOMPICKWINDOW"
"VLA-ZOOMSCALED"
"VLA-ZOOMWINDOW"
"VLAX-3D-POINT"
"VLAX-ADD-CMD"
"VLAX-COUNT"
-
"VLAX-CREATE-OBJECT"
"VLAX-CURVE-GETAREA"
"VLAX-CURVE-GETCLOSESTPOINTTO"
"VLAX-CURVE-GETCLOSESTPOINTTOPROJECTION"
"VLAX-CURVE-GETDISTATPARAM"
"VLAX-CURVE-GETDISTATPOINT"
"VLAX-CURVE-GETENDPARAM"
"VLAX-CURVE-GETENDPOINT"
"VLAX-CURVE-GETFIRSTDERIV"
"VLAX-CURVE-GETPARAMATDIST"
"VLAX-CURVE-GETPARAMATPOINT"
"VLAX-CURVE-GETPOINTATDIST"
"VLAX-CURVE-GETPOINTATPARAM"
"VLAX-CURVE-GETSECONDDERIV"
"VLAX-CURVE-GETSTARTPARAM"
"VLAX-CURVE-GETSTARTPOINT"
"VLAX-CURVE-ISCLOSED"
"VLAX-CURVE-ISPERIODIC"
"VLAX-CURVE-ISPLANAR"
"VLAX-DISABLE-DOCACTIVATION"
"VLAX-DUMP-OBJECT"
"VLAX-ENABLE-DOCACTIVATION"
"VLAX-ENAME->VLA-OBJECT"
"VLAX-ERASED-P"
"VLAX-GET"
"VLAX-GET-ACAD-OBJECT"
"VLAX-GET-OBJECT"
"VLAX-GET-OR-CREATE-OBJECT"
"VLAX-GET-PROPERTY"
"VLAX-IMPORT-TYPE-LIBRARY"
"VLAX-INVOKE"
"VLAX-INVOKE-METHOD"
"VLAX-ITEM"
"VLAX-LDATA-DELETE"
"VLAX-LDATA-GET"
"VLAX-LDATA-LIST"
"VLAX-LDATA-PUT"
"VLAX-LDATA-TEST"
"VLAX-MAKE-SAFEARRAY"
"VLAX-MAKE-VARIANT"
"VLAX-MAP-COLLECTION"
"VLAX-METHOD-APPLICABLE-P"
"VLAX-NEW-DOCUMENT"
"VLAX-OBJECT-RELEASED-P"
"VLAX-OPEN-DOCUMENT"
"VLAX-PRODUCT-KEY"
"VLAX-PROPERTY-AVAILABLE-P"
"VLAX-PUT"
"VLAX-PUT-PROPERTY"
"VLAX-QUEUEEXPR"
"VLAX-READ-ENABLED-P"
"VLAX-REG-APP"
"VLAX-RELEASE-OBJECT"
"VLAX-REMOVE-CMD"
"VLAX-SAFEARRAY->LIST"
"VLAX-SAFEARRAY-FILL"
"VLAX-SAFEARRAY-GET-DIM"
"VLAX-SAFEARRAY-GET-ELEMENT"
"VLAX-SAFEARRAY-GET-L-BOUND"
"VLAX-SAFEARRAY-GET-U-BOUND"
"VLAX-SAFEARRAY-PUT-ELEMENT"
"VLAX-SAFEARRAY-TYPE"
"VLAX-TMATRIX"
"VLAX-TYPEINFO-AVAILABLE-P"
"VLAX-VARIANT-CHANGE-TYPE"
"VLAX-VARIANT-TYPE"
"VLAX-VARIANT-VALUE"
"VLAX-VBABORT"
"VLAX-VBABORTRETRYIGNORE"
"VLAX-VBAPPLICATIONMODAL"
"VLAX-VBARCHIVE"
"VLAX-VBARRAY"
"VLAX-VBBOOLEAN"
"VLAX-VBCANCEL"
"VLAX-VBCRITICAL"
"VLAX-VBCURRENCY"
"VLAX-VBDATAOBJECT"
"VLAX-VBDATE"
"VLAX-VBDEFAULTBUTTON1"
"VLAX-VBDEFAULTBUTTON2"
"VLAX-VBDEFAULTBUTTON3"
"VLAX-VBDIRECTORY"
"VLAX-VBDOUBLE"
"VLAX-VBEMPTY"
"VLAX-VBERROR"
"VLAX-VBEXCLAMATION"
"VLAX-VBHIDDEN"
"VLAX-VBHIRAGANA"
"VLAX-VBIGNORE"
"VLAX-VBINFORMATION"
"VLAX-VBINTEGER"
"VLAX-VBKATAKANA"
"VLAX-VBLONG"
"VLAX-VBLOWERCASE"
"VLAX-VBNARROW"
"VLAX-VBNO"
"VLAX-VBNORMAL"
"VLAX-VBNULL"
"VLAX-VBOBJECT"
"VLAX-VBOK"
"VLAX-VBOKCANCEL"
"VLAX-VBOKONLY"
"VLAX-VBPROPERCASE"
"VLAX-VBQUESTION"
"VLAX-VBREADONLY"
"VLAX-VBRETRY"
"VLAX-VBRETRYCANCEL"
"VLAX-VBSINGLE"
"VLAX-VBSTRING"
"VLAX-VBSYSTEM"
"VLAX-VBSYSTEMMODAL"
"VLAX-VBUPPERCASE"
"VLAX-VBVARIANT"
"VLAX-VBVOLUME"
"VLAX-VBWIDE"
"VLAX-VBYES"
"VLAX-VBYESNO"
"VLAX-VBYESNOCANCEL"
"VLAX-VLA-OBJECT->ENAME"
"VLAX-WRITE-ENABLED-P"
"VLR-ACDB-REACTOR"
"VLR-ADD"
"VLR-ADDED-P"
"VLR-BEEP-REACTION"
"VLR-COMMAND-REACTOR"
"VLR-CURRENT-REACTION-NAME"
"VLR-DATA"
"VLR-DATA-SET"
"VLR-DEEPCLONE-REACTOR"
"VLR-DOCMANAGER-REACTOR"
"VLR-DOCUMENT"
"VLR-DWG-REACTOR"
"VLR-DXF-REACTOR"
"VLR-EDITOR-REACTOR"
"VLR-INSERT-REACTOR"
"VLR-LINKER-REACTOR"
"VLR-LISP-REACTOR"
"VLR-MISCELLANEOUS-REACTOR"
"VLR-MOUSE-REACTOR"
"VLR-OBJECT-REACTOR"
"VLR-OWNER-ADD"
"VLR-OWNER-REMOVE"
"VLR-OWNERS"
"VLR-PERS"
"VLR-PERS-ACTIVATE"
"VLR-PERS-DICTNAME"
"VLR-PERS-LIST"
"VLR-PERS-P"
"VLR-PERS-RELEASE"
"VLR-RANGE"
"VLR-RANGE-SET"
"VLR-REACTION-NAMES"
"VLR-REACTION-SET"
"VLR-REACTIONS"
"VLR-REACTOR.GETDICTKEY"
"VLR-REACTORS"
"VLR-REMOVE"
"VLR-REMOVE-ALL"
"VLR-SYSVAR-REACTOR"
"VLR-TOOLBAR-REACTOR"
"VLR-TRACE-REACTION"
"VLR-TYPE"
"VLR-TYPES"
"VLR-UNDO-REACTOR"
"VLR-WBLOCK-REACTOR"
"VLR-WINDOW-REACTOR"
"VLR-XREF-REACTOR"
)
and that's it I promise!
Until the express tools, sorry for any spam but there's functions in there that may help someone.
-
@bhull: (atoms-family 1)
-
Blast!
-
?? Why ??
Analagous to building a house on quick sand.
/imo
Why is the use of express tools or ACET- functions in LISP, analogous to building a house on quick sand ? Can you please give elaborate explanation.
Thanks
-
Example of quicksand, I used express tools routines in my lisps, then moved from acad to bricscad and those routines no longer work because the subroutines are in ARX files or similar, not available on bricscad. Yes someone made a port of express tools to bricscad, but it seemed to be causing lots of crashing so I don't use it. At some point acad may come out with new version but no longer support the express tools, or the subroutines are built into core functions and no longer exposed to lisp.
Dan
-
Why is the use of express tools or ACET- functions in LISP, analogous to building a house on quick sand ? Can you please give elaborate explanation. Thanks.
I have already done what you have asked.
-
Thanks.
I want to ask one more thing. Is the source code of ACET functions or Express Tools available ? If yes then where can I get it ?
-
Thanks.
I want to ask one more thing. Is the source code of ACET functions or Express Tools available ? If yes then where can I get it ?
Seek employment with Autodesk.
-
Even then, its company property. You can't take it home for your own use.
-
I want to ask one more thing. Is the source code of ACET functions or Express Tools available ? If yes then where can I get it ?
That too was addressed (IMO):
I'm not against users taking advantage of the utilities per se, though I do openly tell folks I won't install or support them.
However I flat out will not use any of the ACET code libraries, and that's what I was making reference to in my first and second posts. There are various authors, some qualified, some not so much; some code is so so, some of it complete crap, some of it resides in arx files without source code ad infinitum, and worse, the package as a whole has historically enjoyed a sporadic existence with regards to licensing and availability. To be aware of these factors and then deliberately invite them into a software project would, imo, be irresponsible -- ergo my first comment.
No thanks, writing and supporting software is challenging enough when (you enjoy the illusion) everything is under your control.
-
Even then, its company property. You can't take it home for your own use.
True. I just meant that's the only way one would get access to the source code.
-
Ask these guys, maybe they reversed engineered the functions?
http://translate.google.com/translate?js=n&sl=auto&tl=destination_language&u=http://www.cadwiesel.de/cadwiesel/ (http://translate.google.com/translate?js=n&sl=auto&tl=destination_language&u=http://www.cadwiesel.de/cadwiesel/)
Thanks.
I want to ask one more thing. Is the source code of ACET functions or Express Tools available ? If yes then where can I get it ?
-
Some of it is open (the lsp files), but the fas and arx files are not.
-
True.
I've gone through each of the .lsp files and copied out the (defun) lines, into a notepad file.
I've added the express tools authors comments that were visible in the source codes to my compilation.
There's only about 50% of the (defuns) that have any information tacked onto them so I'll be organizing and googling, trying to get documentation function at a time, and additionally I've sent an i.t. request for them to install the .chm creator software from Microsoft so I can start organizing them in a more permanent way.
-
IMO ... you could probably replace most of the functions from express tools with functions here on TheSwamp 8)
-
An excerpt:
Fair use defense? Otherwise your post is a clear copyright violation.
-
Examples of fair use include commentary, search engines, criticism, parody, news reporting, research, teaching, library archiving and scholarship.
Yes, I think this falls under library archiving, or commentary.
Furthermore, I don't plan to achieve any sort of financial gain, merely to provide documentation where the creators failed to, simply because of the number of persons using these tools who may have used/needed more extensive documentation.
-
"If you copy this computer program without permission of Autodesk, you are violating the law."
I'm fairly certain that posting here constitutes a copy, and any downloads are further copies....
-
But nothing mentioned over the source code.
please refer to the two previous posts regarding this matter.
On second thought, I'm not going to spend any more time on this.
Pretty disappointing that rather than say "great, documentation for express tools" people say "youre violating the law" so that's about enough for me to not want to proceed :0
-
I recently requested that some source code copied from the swamp's "show your stuff" board be removed from a couple of posts at the Autodesk forums and replaced with a link to the swamp.
Here's the moderators take on the matter:
There is no real the benefit to the users of removing helpful information that was found on the Internet.
-
IMO ... you could probably replace most of the functions from express tools with functions here on TheSwamp 8)
We started a thread a while back where we were rewriting a lot of the express tool functions.
-
IMO ... you could probably replace most of the functions from express tools with functions here on TheSwamp 8)
We started a thread a while back where we were rewriting a lot of the express tool functions.
I think I remember that .. here's my contribution ;D
(ACET-FULL-DWGNAME)
(defun swamp-full-filename nil (strcat (getvar 'dwgprefix) (getvar 'dwgname)))
(swamp-full-filename)
-
IMO ... you could probably replace most of the functions from express tools with functions here on TheSwamp 8)
We started a thread a while back where we were rewriting a lot of the express tool functions.
I think I remember that .. here's my contribution ;D
(ACET-FULL-DWGNAME)
(defun swamp-full-filename nil (strcat (getvar 'dwgprefix) (getvar 'dwgname)))
(swamp-full-filename)
Genius!
-
Yet, I was the one infringing :P
-
Yet, I was the one infringing :P
That's a night in the box.
-
IMO ... you could probably replace most of the functions from express tools with functions here on TheSwamp 8)
We started a thread a while back where we were rewriting a lot of the express tool functions.
I think I remember that .. here's my contribution ;D
(ACET-FULL-DWGNAME)
(defun swamp-full-filename nil (strcat (getvar 'dwgprefix) (getvar 'dwgname)))
(swamp-full-filename)
Genius!
I'm good like that ... LOL
-
The box again?
:embarrassed:
-
On second thought, I'm not going to spend any more time on this. Pretty disappointing that rather than say "great, documentation for express tools" people say "youre violating the law" so that's about enough for me to not want to proceed :0
Instead of taking your marbles and going home I'd suggest you leverage the former fire in the belly enthusiasm you had for documenting the express tools and instead write your own lucidly documented library from scratch -- you will emerge with a library you can call your own and distribute however you deem appropriate -- and you will become significantly smarter in the process -- the least of these is invaluable and the other more valuable than that.
-
Posted by: owenwengerd
« on: February 27, 2014, 09:30:35 am » Insert Quote
Quote from: Bhull1985 on February 27, 2014, 07:30:00 am
An excerpt:
Fair use defense? Otherwise your post is a clear copyright violation.
Posted by: snownut2
« on: February 27, 2014, 11:34:53 am » Insert Quote
"If you copy this computer program without permission of Autodesk, you are violating the law."
I'm fairly certain that posting here constitutes a copy, and any downloads are further copies....
These sort of comments just make me sick. It was obvious I was just trying to contribute, free of charge, to help the community. And I don't even think they're moderators on this board. *shrug* But you offer good advice, and I thank you for that.
-
< ..>
These sort of comments just make me sick. < .. >
chill out dude!. Don't yell at the messenger.
-
< ..>
These sort of comments just make me sick. < .. >
chill out dude!. Don't yell at the messenger.
If that's how I should be looking at it rather than how I was, then I shall. Apologies...
-
These sort of comments just make me sick.
Ummm dude, I think you missed the subtle point that they were doing you a favour by anteing up warnings you would be well served to heed.
It was obvious I was just trying to contribute, free of charge, to help the community.
Regardless your intentions, copyright law is clear. Their willingness to help prevent you from making a mistake should not be construed as them wishing to sh!t on your parade.
tl;dr: You should be thanking them.
-
If that's how I should be looking at it rather than how I was, then I shall. Apologies...
No apologies necessary. All I ask is that you return the favor if you ever catch me doing something stupid.
-
If that's how I should be looking at it rather than how I was, then I shall. Apologies...
No apologies necessary. All I ask is that you return the favor if you ever catch me doing something stupid.
Don't worry, someone will. This is the internet.
-
(http://i.imgur.com/DBEgJ1E.jpg)
http://en.wikipedia.org/wiki/Fair_use
Apology was to Kerry, not Owen...and I don't consider this a favor at all. More nitpicking than anything. Refer to the Wikipedia link.
Knowing full well that it's fair use, and asking for something in return...after suggesting it in the first place....*boggle*
It would make 100% sense if I was doing this for any sort of personal gain....however, that's not the case and I made that very clear.
Well, Back to the box for me, I won't be ctrl+v headers into these boards again that's for sure.
-
As a side example, I could post television shows which aren't available into YouTube without any personal gain. But that is certainly *not* fair use. This isn't the 1980's, intellectual property rights do exist and should be taken with a modicum of seriousness. If you had posted some guidelines to the use of the Express functions that would be acceptable but wholesale reproduction of code won't fall under any exceptions.
-
< .. > If you had posted some guidelines to the use of the Express functions that would be acceptable but wholesale reproduction of code won't fall under any exceptions.
Yes David, I think that is the core of the issue.
Bhull1985,
If in doubt contact AutoDesk. I'm imagine they would have no objection to you providing additional documentation and guidelines.
-
I don't really want to drag this out any further, but I think there's at least a glimmer of hope for a teachable moment.
Infringing copyright may be a victimless crime in many cases, but it still exposes you, your family, and your employer to legal liability and the potential for unintended consequences (like losing your job) even though the copyright owner chooses not to get involved. Fair use is an affirmative defense, which means the it must be raised by the defendant. If it is not raised as a defense, it doesn't apply. Simple as that.
The Swamp Guidelines (http://www.theswamp.org/index.php?topic=9202.0) state:
7. POSTING CODE YOU DIDN'T AUTHOR
Core guidelines:
Attribution - If you didn't author it identify the author.
Permission - If the the author is not a member of the swamp, get permission from the author before posting.
Linking - If possible post a link to the original solution rather than static source code. This ensures the latest version of the solution is made available to those viewing your post.
Diligence - In your post identify what steps you took to attempt to fulfill the above.
I think this states very well how it is your responsibility to a) determine that what you're posting is not infringing, AND b) convince your audience that it is not infringing. I called bhull's post out because neither was done. As Kerry has suggested, a simple email to Autodesk may have been all it took to get permission. Alternatively, "I don't have permission but believe this is a fair use because..." would be another possible approach.
But there is another issue here that is more important.
A community like this remains vibrant and useful only if members police themselves, trust each other, and hold each other accountable, and it behooves all of us to do our part in that respect. Bhull, you can sulk, you can be angry at me, you can start a petition drive to have me banned, but in the end it is *your* character that is being tested here. Faux humility won't work, but sucking it up and taking genuine responsibility for your actions will show your good character and earn you respect in the community. You have a great opportunity here, but you must choose to take advantage of it, and your actions must be genuine.
P.S. I'll admit to being purposely provocative with my "no apologies necessary" reply, but it had the desired effect.
-
Just going to remove my post and end this, really. i'll leave my post script message to owen though.
P.s. Calling a rude and presumptuous reply "proactive" doesn't make it any better, even if you try to Band-Aid it with a "lesson". Jeez, a simple "hey be careful" or something along those lines, would have gone a long way and shown trust in the community. Not calling out an obvious novice mistake and then harping on it for three days. That reeks of elitism, and I don't think anyone wants to go there.
-
It's a shame you're so determined to play some kind if victim card here. Mr. Wengerd and others have done their best to help you regardless how you're completely misinterpretting their efforts.
-
Now they're helping me???
Jeez...wow
It's exactly those types of inflaming posts that drag this crap on...how disgusting. Done!
-
I'll lock this topic untill things settle down a little.
In the words of Bill and Ted, "Be excellent to each other"