« previous next »
Pages: [1] |   Go Down

Author Topic: Unresolved Xref  (Read 3202 times)

0 Members and 1 Guest are viewing this topic.

Matt__W

  • Seagull
  • Posts: 12955
  • I like my water diluted.
Unresolved Xref
« on: November 13, 2008, 03:45:07 PM »
On 1 of 3 user's computers one xref does not load automatically.  The xref manager says the xref is "unresolved".  On the other two computers it works fine.  Is there some obscure variable or something within the file that would prevent it from being loaded?  I don't think there is.  That would be pretty stupid, even for Autodesk.

The drawing has been purged & audited and cleaned as much as possible.


Anyone have any ideas?
« Last Edit: November 13, 2008, 03:50:59 PM by Matt W »
Logged
Autodesk Expert Elite
Revit Subject Matter Expert (SME)
Owner/FAA sUAS Pilot @ http://skyviz.io

jonesy

  • SuperMod
  • Seagull
  • Posts: 15568
Re: Unresolved Xref
« Reply #1 on: November 13, 2008, 03:57:56 PM »
Network drive mapped to a different letter on one computer?
Logged
Thanks for explaining the word "many" to me, it means a lot.

Matt__W

  • Seagull
  • Posts: 12955
  • I like my water diluted.
Re: Unresolved Xref
« Reply #2 on: November 13, 2008, 04:00:45 PM »
Quote from: jonesy on November 13, 2008, 03:57:56 PM
Network drive mapped to a different letter on one computer?
Nope.... the other xrefs are located on the same drive AND the same folder.
Logged
Autodesk Expert Elite
Revit Subject Matter Expert (SME)
Owner/FAA sUAS Pilot @ http://skyviz.io

Matt__W

  • Seagull
  • Posts: 12955
  • I like my water diluted.
Re: Unresolved Xref
« Reply #3 on: November 13, 2008, 04:10:51 PM »
Update: I just used the AECTOACAD (AKA ExportToAutoCAD) command to basically obliterate the file down to it's most basic components and now it works!


Thanks for nothing, people (except you Tracey)!!   :wink:


Quote from: AutoCAD Help File
Use this procedure to export a drawing created in the software to AutoCAD. This process creates a new AutoCAD drawing with all AEC objects exploded. The original drawing is not affected.

Depending on the size and complexity of the original drawing, the resulting AutoCAD drawing may contain a large number of primitive objects, which can affect drawing performance.
Logged
Autodesk Expert Elite
Revit Subject Matter Expert (SME)
Owner/FAA sUAS Pilot @ http://skyviz.io

Greg B

  • Seagull
  • Posts: 12417
  • Tell me a Joke!
Re: Unresolved Xref
« Reply #4 on: November 13, 2008, 04:21:03 PM »
Quote from: Matt W on November 13, 2008, 04:10:51 PM

Thanks for nothing, people (except you Tracey)!!   :wink:


Man...you didn't even give me a chance to say it's because of crappy software.   :-D
Logged

Matt__W

  • Seagull
  • Posts: 12955
  • I like my water diluted.
Re: Unresolved Xref
« Reply #5 on: November 13, 2008, 04:21:57 PM »
Quote from: Greg B on November 13, 2008, 04:21:03 PM
Quote from: Matt W on November 13, 2008, 04:10:51 PM

Thanks for nothing, people (except you Tracey)!!   :wink:


Man...you didn't even give me a chance to say it's because of crappy software.   :-D
No need to state the obvious!   :-D
Logged
Autodesk Expert Elite
Revit Subject Matter Expert (SME)
Owner/FAA sUAS Pilot @ http://skyviz.io

Greg B

  • Seagull
  • Posts: 12417
  • Tell me a Joke!
Re: Unresolved Xref
« Reply #6 on: November 13, 2008, 04:26:16 PM »
Quote from: Matt W on November 13, 2008, 04:21:57 PM
Quote from: Greg B on November 13, 2008, 04:21:03 PM
Quote from: Matt W on November 13, 2008, 04:10:51 PM

Thanks for nothing, people (except you Tracey)!!   :wink:


Man...you didn't even give me a chance to say it's because of crappy software.   :-D
No need to state the obvious!   :-D

No...there is always a need to state the obvious.  Else a bunny bashes his face in.
Logged
Pages: [1] |   Go Up
« previous next »