TheSwamp
CAD Forums => CAD General => Topic started by: Fabricio28 on July 23, 2015, 10:13:44 AM
-
Hi guys,
How are you?
How Can I mirror the viewport?
I'm working in a project and I need to mirror a viewport.
Anybody Can help me out please?
Regards
-
change the the 'view' in that viewport to BOTTOM if original is TOP
Left = Right
Front = Back
Actually it appears you want to either
Reverse your profile or
Use DVIEW>>TWIST>>180 on your viewports so that pipe flow direction matches your profile direction
-
Why would you want to look at a "2D" drawing from the bottom?
Wouldn't mirroring the drawing be more appropriate?
-
Thank you for replay guys,
I wouldn't mirroring the drawing because the problem is the profile.
I have to start the profile in a highest point to a lower.
I've attached other file to explain better my task.
Thank in advance
-
if using C3D there is an option to create the profile left to right OR right to left....it's rare but the right to left method is useful sometimes
-
if using C3D there is an option to create the profile left to right OR right to left....it's rare but the right to left method is useful sometimes
Unfortunately I'm not using C3D.
How Can I fix it in autocad cad 2015?
Regards
-
dview twist the viewports that the profile is showing....below them
you will need to reorient your labels however that should go rather quickly (if that is what the ground is doing?)
-
dview twist the viewports that the profile is showing....below them
you will need to reorient your labels however that should go rather quickly (if that is what the ground is doing?)
I don't know how to do that, to be honest. :embarrassed:
Could you help me out, please?
-
activate viewport
type DVIEW @ command line
select an object
chose TWIST
enter 180
enter...
you should be done...if your label blocks were set to match layout orientation you might not even need to rotate them
-
activate viewport
type DVIEW @ command line
select an object
chose TWIST
enter 180
enter...
you should be done...if your label blocks were set to match layout orientation you might not even need to rotate them
If I rotate the viewport, model space will change too?
-
you are not rotating the viewport...
you are twisting (rotating) what you see inside the viewport
your viewport...first as you posted
second twisted 180
-
I use these in buttons to work in Model Space.
They also work if you Open a Viewport.
UCS World
^C^C-view;top;
UCS Right Elevation
^C^Cdview;;tw;-90;;_ucs;w;_ucs;z;90;
UCS Left
^C^Cdview;;tw;90;;_ucs;w;_ucs;z;270;
UCS Back
^C^Cdview;;tw;180;;_ucs;w;_ucs;z;180;
-
Hi guys,
Thank you very much for the help.
But isn't working because if use dview and twist 180º I can't fix the labels.
I don't know what to do. :embarrassed2:
-
Hi guys,
Thank you very much for the help.
But isn't working because if use dview and twist 180º I can't fix the labels.
I don't know what to do. :embarrassed2:
Set those label blocks to align to layout..
I can't get that change to stick in block editor, so you may need to redefine the blocks and set that property from the beginning....
Or re-label
-
Hi guys,
Thank you very much for the help.
But isn't working because if use dview and twist 180º I can't fix the labels.
I don't know what to do. :embarrassed2:
Set those label blocks to align to layout..
I can't get that change to stick in block editor, so you may need to redefine the blocks and set that property from the beginning....
Or re-label
Hi mjfarrell
I don't know how to set the labels to align to layout.
Could you make a little example in dwg file, please?
-
..
-
see attached
-
Fantastic! :-D
I'll try it out, but I have a lot of text.
I think I have to change the texts into blocks.
-
Fantastic! :-D
I'll try it out, but I have a lot of text.
I think I have to change the texts into blocks.
Actually NO
Text Styles ALSO support this fuunction
-
Thank you very much my friend,
You helped me a lot.
I'll try it out later, and I let you know if worked.
Regards
-
Thank you very much my friend,
You helped me a lot.
I'll try it out later, and I let you know if worked.
Regards
mjfarrell,
Thank you very much!!
Worked great. Sorry for delay :lol: