POLYLINE Layer: "0"
Space: Model space
Handle = 65
Closed
starting width 0.0000
ending width 0.0000
area 2.6778
perimeter 26.7908
VERTEX Layer: "0"
Space: Model space
Handle = 66
at point, X= 3.1582 Y= -0.8225 Z= 0.0000
starting width 0.0000
ending width 0.0000
VERTEX Layer: "0"
Space: Model space
Handle = 67
at point, X= 4.7932 Y= -0.8225 Z= 0.0000
starting width 0.0000
Press ENTER to continue:
ending width 0.0000
bulge 0.4142
center X= 4.7932 Y= -0.5725 Z= 0.0000
radius 0.2500
start angle 270
end angle 0
VERTEX Layer: "0"
Space: Model space
Handle = 68
at point, X= 5.0432 Y= -0.5725 Z= 0.0000
starting width 0.0000
ending width 0.0000
VERTEX Layer: "0"
Space: Model space
Handle = 69
at point, X= 5.0432 Y= 4.3975 Z= 0.0000
starting width 0.0000
ending width 0.0000
bulge 0.4142
center X= 4.7932 Y= 4.3975 Z= 0.0000
radius 0.2500
Press ENTER to continue:
start angle 0
end angle 90
VERTEX Layer: "0"
Space: Model space
Handle = 6A
at point, X= 4.7932 Y= 4.6475 Z= 0.0000
starting width 0.0000
ending width 0.0000
VERTEX Layer: "0"
Space: Model space
Handle = 6B
at point, X= 3.1582 Y= 4.6475 Z= 0.0000
starting width 0.0000
ending width 0.0000
VERTEX Layer: "0"
Space: Model space
Handle = 6C
at point, X= 3.1582 Y= 4.8625 Z= 0.0000
starting width 0.0000
ending width 0.0000
Press ENTER to continue:
VERTEX Layer: "0"
Space: Model space
Handle = 6D
at point, X= 7.0982 Y= 4.8625 Z= 0.0000
starting width 0.0000
ending width 0.0000
VERTEX Layer: "0"
Space: Model space
Handle = 6E
at point, X= 7.0982 Y= 4.6475 Z= 0.0000
starting width 0.0000
ending width 0.0000
VERTEX Layer: "0"
Space: Model space
Handle = 6F
at point, X= 5.4632 Y= 4.6475 Z= 0.0000
starting width 0.0000
ending width 0.0000
bulge 0.4142
center X= 5.4632 Y= 4.3975 Z= 0.0000
Press ENTER to continue:
radius 0.2500
start angle 90
end angle 180
VERTEX Layer: "0"
Space: Model space
Handle = 70
at point, X= 5.2132 Y= 4.3975 Z= 0.0000
starting width 0.0000
ending width 0.0000
VERTEX Layer: "0"
Space: Model space
Handle = 71
at point, X= 5.2132 Y= -0.5725 Z= 0.0000
starting width 0.0000
ending width 0.0000
bulge 0.4142
center X= 5.4632 Y= -0.5725 Z= 0.0000
radius 0.2500
start angle 180
end angle 270
Press ENTER to continue:
VERTEX Layer: "0"
Space: Model space
Handle = 72
at point, X= 5.4632 Y= -0.8225 Z= 0.0000
starting width 0.0000
ending width 0.0000
VERTEX Layer: "0"
Space: Model space
Handle = 74
at point, X= 7.0982 Y= -0.8225 Z= 0.0000
starting width 0.0000
ending width 0.0000
VERTEX Layer: "0"
Space: Model space
Handle = 75
at point, X= 7.0982 Y= -1.0375 Z= 0.0000
starting width 0.0000
ending width 0.0000
VERTEX Layer: "0"
Space: Model space
Press ENTER to continue:
Handle = 76
at point, X= 3.1582 Y= -1.0375 Z= 0.0000
starting width 0.0000
ending width 0.0000
END SEQUENCE Layer: "0"
Space: Model space
Handle = 78