Luck number 13!!
It is working greating great.....
http://www.theswamp.org/lilly_pond/avcad/ercc13.1.zip?nossi=1please download form the link and check my changes and load it up and test it out to see why i made the changes. I tagged all my changes in the LSP file.
I made some changes...just text positioning and, and some default DCL options.
There are 2 things...
1. rtag - can this text be placed at the top of the rack (above the casing) at the center. This is the racks designation, if there is one. I changed the DCL file to default to a blank box so the user has the option of putting the text in, instead of it automatically being there.
2. on the split units (2 way split and 3 way split) can there be a line drawn to split the units.
- on the 2 way split the line should be in the middle
- on the 3 way split the line should be eqaul distance from each other
I figured the dimension to be.
- 2 way split - from left endpoint of unit = 9.5"
- 3 way split - from left endpoint of unit = 1st line = 6.3125"
= 1st line - 6.3125" (6-5/16")
= 2nd line - 12.625" (1'-11/16")
After this I think we will be done. A finial check of course...
I do have a question though....lol...I just thought about this today....
how hard would it be to not have a drop down for the rack height....right now there are options of 25,30,35,40,45....
These are not always the case some custom jobs have racks with height 21, 24,44...etc.
Would it be hard to incorporate a text box that the user can input in the rack hight..so if the rack is custom he can just type in...lets just say 32 for the rack height??
If not, dont worry about it...we have worked hard on this already, If its too hard or too much code has to be changed....then they will have to just deal with it!!
Thanks a lot for the help with this.
You were right about the drawing option instead of using blocks...seems much easier! I would have never thought of it.