Here is my comm and line
I am trying to use shift-c for snap override of snap to center
Command: CMDECHO
Enter new value for CMDECHO <1>:
Command: CR
Select objects to copy:
Select objects: Specify opposite corner: 7 found
Select objects:
Pick base point:._copybase Specify base point: _non
Invalid point.
Specify base point:
Select objects: Specify opposite corner: 6 found
Select objects: 1 found, 7 total
Select objects:
Command: CR
Select objects to copy:
Select objects: Specify opposite corner: 7 found
Select objects:
Pick base point: <Polar on> <Object Snap Tracking on> ._copybase Specify base
point: _non
Select objects: 7 found
Select objects:
Command: ._undo Current settings: Auto = On, Control = All, Combine = Yes
Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
<1>: _begin
Command: ._pasteclip Duplicate definition of block _Open90 ignored.
Duplicate definition of block _Small ignored.
Duplicate definition of block AecRight ignored.
Duplicate definition of block _Oblique ignored.
Specify insertion point: _non
Command: ._move
Select objects: 7 found
Select objects:
Specify base point or [Displacement] <Displacement>: _non Specify second point
or <use first point as displacement>:
>>Enter new value for ORTHOMODE <0>:
Resuming .MOVE command.
Specify second point or <use first point as displacement>: *Cancel*
Command: ._erase
Select objects: 7 found
Select objects:
Command:
Command: CR
Select objects to copy:
Select objects: Specify opposite corner: 7 found
Select objects:
Pick base point:._copybase Specify base point: _non
Select objects: 7 found
Select objects:
Command: ._undo Current settings: Auto = On, Control = All, Combine = Yes
Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
<1>: _begin
Command: ._pasteclip Duplicate definition of block _Open90 ignored.
Duplicate definition of block _Small ignored.
Duplicate definition of block AecRight ignored.
Duplicate definition of block _Oblique ignored.
Specify insertion point: _non
Command: ._move
Select objects: 7 found
Select objects:
Specify base point or [Displacement] <Displacement>: _non Specify second point
or <use first point as displacement>:
>>Enter new value for OSMODE <4351>:
Resuming .MOVE command.
Specify second point or <use first point as displacement>:
>>Enter new value for OSNAPOVERRIDE <0>:
Resuming .MOVE command.
Specify second point or <use first point as displacement>:
>>Enter new value for OSMODE <4351>:
Resuming .MOVE command.
Specify second point or <use first point as displacement>:
>>Enter new value for OSNAPOVERRIDE <0>:
Resuming .MOVE command.
Specify second point or <use first point as displacement>:
>>Enter new value for OSMODE <4351>:
Resuming .MOVE command.
Specify second point or <use first point as displacement>:
>>Enter new value for OSNAPOVERRIDE <0>:
Resuming .MOVE command.
Specify second point or <use first point as displacement>:
Command: ._rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
Select objects: 7 found
Select objects:
Specify base point: _non
Invalid point.
Specify base point: ._erase
Invalid point.
; error: An error has occurred inside the *error* functionFunction cancelled
Specify base point:
Specify rotation angle or [Copy/Reference] <270>: